From mboxrd@z Thu Jan  1 00:00:00 1970
From: Mohan Sundaram <smohan@gmail.com>
Date: Sat, 16 Sep 2006 14:46:39 +0000
Subject: Re: [LARTC] Traffic Control in a bridge
Message-Id: <450C0B7F.1080108@vsnl.com>
List-Id: <lartc.vger.kernel.org>
References: <001601c6d98a$aa914840$02bca8c0@freelance>
In-Reply-To: <001601c6d98a$aa914840$02bca8c0@freelance>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Ming-Ching Tiew wrote:
> Normally when we talk about traffic control, we are talking about
> doing traffic control (tc) using a router, ie packets into an
> interface and based on routing, they goes out to somewhere else.
> 
> However I have a box with two interfaces, eth0 and eth1 added to
> a bridge br0 and I would like to perform traffic control via the
> two interfaces. Is that supposed to work the same as the router 
> counterpart, ie traffic control is transparent to routing and bridging ? 
>  
Eminently feasible. This link should help.
http://leaf.sourceforge.net/doc/guide/buhtb-qos.html

Mohan
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc