From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mohan Sundaram Date: Sat, 16 Sep 2006 14:51:17 +0000 Subject: Re: [LARTC] Traffic Control in a bridge Message-Id: <450C0C95.3070004@vsnl.com> List-Id: References: <001601c6d98a$aa914840$02bca8c0@freelance> In-Reply-To: <001601c6d98a$aa914840$02bca8c0@freelance> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Mohan Sundaram wrote: > Ming-Ching Tiew wrote: >> Normally when we talk about traffic control, we are talking about >> doing traffic control (tc) using a router, ie packets into an >> interface and based on routing, they goes out to somewhere else. >> >> However I have a box with two interfaces, eth0 and eth1 added to >> a bridge br0 and I would like to perform traffic control via the >> two interfaces. Is that supposed to work the same as the router >> counterpart, ie traffic control is transparent to routing and bridging >> ? > Eminently feasible. This link should help. > http://leaf.sourceforge.net/doc/guide/buhtb-qos.html > > Mohan > Looks like the page has moved to the link below http://www.leaf-project.org/doc/bk04ch22.html Mohan _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc