From mboxrd@z Thu Jan 1 00:00:00 1970 From: gypsy Date: Sat, 16 Sep 2006 16:20:48 +0000 Subject: Re: [LARTC] Re: htb traffic shaping problem Message-Id: <450C2460.44BAF0E5@iswest.com> List-Id: References: <6.2.0.14.2.20060912225307.02dd8f98@linux.sysreset.com> In-Reply-To: <6.2.0.14.2.20060912225307.02dd8f98@linux.sysreset.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Bugzilla-Redirect wrote: > > Yes, the output is below: > eth0 Link encap:Ethernet HWaddr 00:11:09:2A:A6:F6 > inet addr:10.0.0.50 Bcast:10.0.0.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:4244867 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1306632 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:3898905509 (3.6 GiB) TX bytes:1756030081 (1.6 GiB) > Interrupt:19 Try a "quantum 1514" then; that is correct for an ethernet device with an MTU of 1500. Perhaps reading the source code will give a clue about MPU and MTU? Frankly, I'd set it to whatever works as long as the rest of the status info looks right and not give a damn that it is huge. -- gypsy _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc