From: "Frédéric DALLEAU" <frederic.dalleau@palmsource.com>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] a2play and btsco questions
Date: Tue, 19 Sep 2006 14:17:13 +0200 [thread overview]
Message-ID: <450FDFC9.6060804@palmsource.com> (raw)
In-Reply-To: <m3venkt9uk.fsf@kurono.home>
Hi,
plugin type is a2dpd
pcm.headphone {
type a2dpd <------------------here
bdaddr "00:16:B8:0E:8B:15"
}
Fr=E9d=E9ric
joakim@verona.se a =E9crit :
> joakim@verona.se writes:
>
> I tried the a2dpd daemon as per Brad:s suggestion, but Im having
> difficulties. The build and install went ok.
>
> This is my configuration:
> ~/.asoundrc
> pcm.headphone {
> type a2dp
> bdaddr "00:16:B8:0E:8B:15"
> }
>
> ~/.a2dprc
> [a2dpd]
> address=3D00:16:B8:0E:8B:15
> cmdplay=3Decho play
> cmdnext=3Decho next
> cmdpause=3Decho pause
> cmdprev=3Decho prev
> cmdnew=3Decho cmdnew
> logfile=3D/tmp/a2dpdlog
>
> then I start a2dpd
>
> then I test with:
> mplayer -ao alsa:device=3Dheadphone 01.mp3
>
> alsa-init: using device headphone
> DEBUG: _snd_pcm_a2dp_open: name headphone mode 0
> DEBUG: _snd_pcm_a2dp_open: bdaddr/dest is 00:16:B8:0E:8B:15
> DEBUG: a2dp_alloc: init
> DEBUG: a2dp_connect: a2dp 0xa3b75b8 (sk=3D0, control_sk=3D0)
> DEBUG: connect_stream: Using address: 15:8B:0E:B8:16:00
> DEBUG: detect_a2dp: Found A2DP Sink
> DEBUG: connect_stream: Found A2DP Sink at the destination
> DEBUG: do_connect: Connected [imtu 672, omtu 672, flush_to 65535]
> DEBUG: connect_stream: Sent the Stream End Point Discovery Command
> DEBUG: connect_stream: couldn't get avdtp_discover
>
> So something goes wrong
>
> a2dpd has this to say:
> a2dpd
> Cannot open /dev/input/uinput: No such file or directory
> a2dpd [Sep 19 2006 11:50:59] starting ...a2dpd addr=3D00:16:B8:0E:8B:15
> timer=3D4000 us [Sep 19 2006 11:50:59]
> setscheduler returns -1 (errno=3D1:Operation not permitted)
> main_thread:Accepting incoming tcp stream connection
> New connection to bluetooth [44100 hz]
> avrcp: Accepting incoming connection
> avdtp: Accepting incoming connection
>
>
> the device works in stereo with a2dplay
>
>
> =
>> Brad Midgley <bmidgley@xmission.com> writes:
>>
>> =
>>> joakim
>>>
>>> =
>>>> I'm using my HBH-DS970 headset with a2play, and it works nicely.
>>>> However, I would also like o use the daemon functionality of the btsco
>>>> key daemon at the same time, so as to control playback with the
>>>> headset butons. Is this possible?
>>>> =
>>> well it might be possible for you to hack something together using the
>>> btsco settings file.
>>>
>>> if your headset supports avrcp, you should be able to use the alsa
>>> plugin and a2dpd daemon to control playback. that would be more flexibl=
e.
>>> =
>> According to the docs I need a2play to play stereo, since the
>> HBH-DS970 supports stereo. Has this requirement changed? It would be
>> much nicer wih a proper alsa device of course.
>>
>> =
>>> brad
>>>
>>> -----------------------------------------------------------------------=
--
>>> Take Surveys. Earn Cash. Influence the Future of IT
>>> Join SourceForge.net's Techsay panel and you'll get the chance to share=
your
>>> opinions on IT & business topics through brief surveys -- and earn cash
>>> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
>>> =
>> -- =
>> Joakim Verona
>> http://www.verona.se
>>
>>
>> -------------------------------------------------------------------------
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to share =
your
>> opinions on IT & business topics through brief surveys -- and earn cash
>> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
>> =
>
> =
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2006-09-19 12:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-18 10:01 [Bluez-users] a2play and btsco questions joakim
2006-09-18 22:41 ` Brad Midgley
2006-09-19 7:36 ` joakim
2006-09-19 10:43 ` joakim
2006-09-19 12:17 ` Frédéric DALLEAU [this message]
2006-09-19 12:41 ` joakim
2006-09-19 12:55 ` joakim
2006-09-19 13:07 ` Frédéric DALLEAU
2006-09-19 15:20 ` joakim
2006-09-20 12:20 ` joakim
2006-09-22 8:15 ` Frédéric DALLEAU
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=450FDFC9.6060804@palmsource.com \
--to=frederic.dalleau@palmsource.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.