From: Timur Tabi <timur@freescale.com>
To: linux-kernel@vger.kernel.org
Subject: "qc timeout" error in sata_sil 3114 driver, 2.6.18
Date: Fri, 22 Sep 2006 15:53:17 -0500 [thread overview]
Message-ID: <45144D3D.4010400@freescale.com> (raw)
I'm working on a new PowerPC board (8349 based) with a Silicon Image 3114 SATA controller
connected to a Hitachi drive. When the sata_sil driver loads and tries to find the device,
I get "qc timeout" errors. I don't know a lot about SATA. Can anyone give me a clue as
to what could be wrong?
[ 9.434695] sata_sil 0000:00:10.0: Applying R_ERR on DMA activate FIS errata fix
[ 9.442102] ata_device_add: ENTER
[ 9.445425] ata_host_add: ENTER
[ 9.448749] ata_port_start: prd alloc, virt c0583000, dma 583000
[ 9.454767] ata1: SATA max UDMA/100 cmd 0xD100E080 ctl 0xD100E08A bmdma 0xD100E000 irq 22
[ 9.462948] __ata_port_freeze: ata1 port frozen
[ 9.467471] ata_host_add: ENTER
[ 9.470732] ata_port_start: prd alloc, virt cff55000, dma ff55000
[ 9.476830] ata2: SATA max UDMA/100 cmd 0xD100E0C0 ctl 0xD100E0CA bmdma 0xD100E008 irq 22
[ 9.485000] __ata_port_freeze: ata2 port frozen
[ 9.489522] ata_host_add: ENTER
[ 9.492782] ata_port_start: prd alloc, virt c05d4000, dma 5d4000
[ 9.498794] ata3: SATA max UDMA/100 cmd 0xD100E280 ctl 0xD100E28A bmdma 0xD100E200 irq 22
[ 9.506965] __ata_port_freeze: ata3 port frozen
[ 9.511487] ata_host_add: ENTER
[ 9.514749] ata_port_start: prd alloc, virt c05d6000, dma 5d6000
[ 9.520759] ata4: SATA max UDMA/100 cmd 0xD100E2C0 ctl 0xD100E2CA bmdma 0xD100E208 irq 22
[ 9.528930] __ata_port_freeze: ata4 port frozen
[ 9.533470] ata_device_add: probe begin
[ 9.537301] scsi0 : sata_sil
[ 9.540416] ata_port_schedule_eh: port EH scheduled
[ 9.545313] ata_scsi_error: ENTER
[ 9.548623] ata_port_flush_task: ENTER
[ 9.552375] ata_port_flush_task: flush #1
[ 9.556404] ata_eh_autopsy: ENTER
[ 9.559716] ata_eh_recover: ENTER
[ 9.563038] ata_eh_prep_resume: ENTER
[ 9.566693] ata_eh_prep_resume: EXIT
[ 9.570262] __ata_port_freeze: ata1 port frozen
[ 9.886275] ata_std_softreset: ENTER
[ 9.889842] ata_std_softreset: EXIT, classes[0]=5 [1]=0
[ 9.895061] ata_std_postreset: ENTER
[ 9.898632] ata1: SATA link down (SStatus 0 SControl 310)
[ 9.904023] ata_std_postreset: EXIT, no device
[ 9.908461] ata_eh_thaw_port: ata1 port thawed
[ 9.912896] ata_eh_revalidate_and_attach: ENTER
[ 9.917419] ata_eh_revalidate_and_attach: EXIT
[ 9.921854] ata_eh_resume: ENTER
[ 9.925075] ata_eh_resume: EXIT
[ 9.928210] ata_eh_suspend: ENTER
[ 9.931518] ata_eh_suspend: EXIT
[ 9.934739] ata_eh_recover: EXIT, rc=0
[ 9.938485] ata_scsi_error: EXIT
[ 9.941709] scsi1 : sata_sil
[ 9.944792] ata_port_schedule_eh: port EH scheduled
[ 9.949688] ata_scsi_error: ENTER
[ 9.952999] ata_port_flush_task: ENTER
[ 9.956750] ata_port_flush_task: flush #1
[ 9.960778] ata_eh_autopsy: ENTER
[ 9.964093] ata_eh_recover: ENTER
[ 9.967413] ata_eh_prep_resume: ENTER
[ 9.971069] ata_eh_prep_resume: EXIT
[ 9.974639] __ata_port_freeze: ata2 port frozen
[ 10.290287] ata_std_softreset: ENTER
[ 10.293861] ata_std_softreset: about to softreset, devmask=1
[ 10.299515] ata_bus_softreset: ata2: bus reset via SRST
[ 10.458293] ata_dev_classify: found ATA device by sig
[ 10.463338] ata_std_softreset: EXIT, classes[0]=1 [1]=0
[ 10.468556] ata_std_postreset: ENTER
[ 10.472128] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.478303] ata_std_postreset: EXIT
[ 10.481784] ata_eh_thaw_port: ata2 port thawed
[ 10.486220] ata_eh_revalidate_and_attach: ENTER
[ 10.490760] ata2: ata_dev_select: ENTER, ata2: device 0, wait 1
[ 10.496700] ata2: ata_dev_select: ENTER, ata2: device 0, wait 1
[ 10.502654] ata_exec_command_mmio: ata2: cmd 0xEC
[ 40.506276] ata_port_flush_task: ENTER
[ 40.510020] ata_port_flush_task: flush #1
[ 40.514055] __ata_port_freeze: ata2 port frozen
[ 40.518576] ata2.00: qc timeout (cmd 0xec)
[ 40.522673] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 40.528758] ata_eh_revalidate_and_attach: EXIT
[ 41.034273] ata_eh_prep_resume: ENTER
[ 41.037925] ata_eh_prep_resume: EXIT
[ 41.041495] __ata_port_freeze: ata2 port frozen
[ 41.046020] sata_std_hardreset: ENTER
[ 41.366292] ata_dev_classify: found ATA device by sig
[ 41.371336] sata_std_hardreset: EXIT, class=1
[ 41.375686] ata_std_postreset: ENTER
[ 41.379258] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 41.385430] ata_std_postreset: EXIT
[ 41.388913] ata_eh_thaw_port: ata2 port thawed
[ 41.393349] ata_eh_revalidate_and_attach: ENTER
[ 41.397887] ata2: ata_dev_select: ENTER, ata2: device 0, wait 1
[ 41.403827] ata2: ata_dev_select: ENTER, ata2: device 0, wait 1
[ 41.409770] ata_exec_command_mmio: ata2: cmd 0xEC
[ 71.414275] ata_port_flush_task: ENTER
[ 71.418016] ata_port_flush_task: flush #1
[ 71.422049] __ata_port_freeze: ata2 port frozen
[ 71.426570] ata2.00: qc timeout (cmd 0xec)
[ 71.430666] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 71.436751] ata_eh_revalidate_and_attach: EXIT
[ 71.942273] ata_eh_prep_resume: ENTER
[ 71.945925] ata_eh_prep_resume: EXIT
[ 71.949496] __ata_port_freeze: ata2 port frozen
[ 71.954021] sata_std_hardreset: ENTER
[ 72.274292] ata_dev_classify: found ATA device by sig
[ 72.279338] sata_std_hardreset: EXIT, class=1
[ 72.283688] ata_std_postreset: ENTER
[ 72.287260] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 72.293433] ata_std_postreset: EXIT
[ 72.296917] ata_eh_thaw_port: ata2 port thawed
[ 72.301353] ata_eh_revalidate_and_attach: ENTER
[ 72.305890] ata2: ata_dev_select: ENTER, ata2: device 0, wait 1
[ 72.311831] ata2: ata_dev_select: ENTER, ata2: device 0, wait 1
[ 72.317774] ata_exec_command_mmio: ata2: cmd 0xEC
[ 102.322275] ata_port_flush_task: ENTER
[ 102.326017] ata_port_flush_task: flush #1
[ 102.330051] __ata_port_freeze: ata2 port frozen
[ 102.334572] ata2.00: qc timeout (cmd 0xec)
[ 102.338668] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 102.344753] ata_eh_revalidate_and_attach: EXIT
[ 102.850273] ata_eh_prep_resume: ENTER
[ 102.853926] ata_eh_prep_resume: EXIT
[ 102.857495] __ata_port_freeze: ata2 port frozen
[ 102.862020] sata_std_hardreset: ENTER
[ 103.182291] ata_dev_classify: found ATA device by sig
[ 103.187335] sata_std_hardreset: EXIT, class=1
[ 103.191685] ata_std_postreset: ENTER
[ 103.195257] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 103.201431] ata_std_postreset: EXIT
[ 103.204915] ata_eh_thaw_port: ata2 port thawed
[ 103.209351] ata_eh_revalidate_and_attach: ENTER
[ 103.213874] ata_eh_revalidate_and_attach: EXIT
[ 103.218311] ata_eh_resume: ENTER
[ 103.221529] ata_eh_resume: EXIT
[ 103.224664] ata_eh_suspend: ENTER
[ 103.227972] ata_eh_suspend: EXIT
[ 103.231194] ata_eh_recover: EXIT, rc=0
[ 103.234942] ata_scsi_error: EXIT
[ 103.238169] scsi2 : sata_sil
[ 103.241320] ata_port_schedule_eh: port EH scheduled
[ 103.246219] ata_scsi_error: ENTER
[ 103.249530] ata_port_flush_task: ENTER
[ 103.253282] ata_port_flush_task: flush #1
[ 103.257311] ata_eh_autopsy: ENTER
[ 103.260623] ata_eh_recover: ENTER
[ 103.263944] ata_eh_prep_resume: ENTER
[ 103.267600] ata_eh_prep_resume: EXIT
[ 103.271171] __ata_port_freeze: ata3 port frozen
[ 103.586275] ata_std_softreset: ENTER
[ 103.589843] ata_std_softreset: EXIT, classes[0]=5 [1]=0
[ 103.595062] ata_std_postreset: ENTER
[ 103.598633] ata3: SATA link down (SStatus 0 SControl 310)
[ 103.604024] ata_std_postreset: EXIT, no device
[ 103.608462] ata_eh_thaw_port: ata3 port thawed
[ 103.612898] ata_eh_revalidate_and_attach: ENTER
[ 103.617421] ata_eh_revalidate_and_attach: EXIT
[ 103.621857] ata_eh_resume: ENTER
[ 103.625078] ata_eh_resume: EXIT
[ 103.628213] ata_eh_suspend: ENTER
[ 103.631521] ata_eh_suspend: EXIT
[ 103.634742] ata_eh_recover: EXIT, rc=0
[ 103.638489] ata_scsi_error: EXIT
[ 103.641714] scsi3 : sata_sil
[ 103.644807] ata_port_schedule_eh: port EH scheduled
[ 103.649704] ata_scsi_error: ENTER
[ 103.653015] ata_port_flush_task: ENTER
[ 103.656766] ata_port_flush_task: flush #1
[ 103.660796] ata_eh_autopsy: ENTER
[ 103.664108] ata_eh_recover: ENTER
[ 103.667430] ata_eh_prep_resume: ENTER
[ 103.671086] ata_eh_prep_resume: EXIT
[ 103.674657] __ata_port_freeze: ata4 port frozen
[ 103.990276] ata_std_softreset: ENTER
[ 103.993846] ata_std_softreset: EXIT, classes[0]=5 [1]=0
[ 103.999066] ata_std_postreset: ENTER
[ 104.002638] ata4: SATA link down (SStatus 0 SControl 310)
[ 104.008030] ata_std_postreset: EXIT, no device
[ 104.012468] ata_eh_thaw_port: ata4 port thawed
[ 104.016904] ata_eh_revalidate_and_attach: ENTER
[ 104.021427] ata_eh_revalidate_and_attach: EXIT
[ 104.025862] ata_eh_resume: ENTER
[ 104.029083] ata_eh_resume: EXIT
[ 104.032219] ata_eh_suspend: ENTER
[ 104.035526] ata_eh_suspend: EXIT
[ 104.038748] ata_eh_recover: EXIT, rc=0
[ 104.042497] ata_scsi_error: EXIT
[ 104.045722] ata_device_add: host probe begin
[ 104.049988] ata_device_add: EXIT, returning 4
--
Timur Tabi
Linux Kernel Developer @ Freescale
next reply other threads:[~2006-09-22 20:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-22 20:53 Timur Tabi [this message]
2006-09-26 5:18 ` "qc timeout" error in sata_sil 3114 driver, 2.6.18 Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45144D3D.4010400@freescale.com \
--to=timur@freescale.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.