From: Larry Woodman <lwoodman@redhat.com>
To: linux-kernel@vger.kernel.org
Subject: Re: oom kill oddness.
Date: Fri, 29 Sep 2006 16:03:14 -0400 [thread overview]
Message-ID: <451D7C02.2090907@redhat.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1227 bytes --]
>
>
>So I have two boxes that are very similar.
>Both have 2GB of RAM & 1GB of swap space.
>One has a 2.8GHz CPU, the other a 2.93GHz CPU, both dualcore.
>
>The slower box survives a 'make -j bzImage' of a 2.6.18 kernel tree
>without incident. (Although it takes ~4 minutes longer than a -j2)
>
>The faster box goes absolutely nuts, oomkilling everything in sight,
>until eventually after about 10 minutes, the box locks up dead,
>and won't even respond to pings.
>
>Oh, the only other difference - the slower box has 1 disk, whereas the
>faster box has two in RAID0. I'm not surprised that stuff is getting
>oom-killed given the pathological scenario, but the fact that the
>box never recovered at all is a little odd. Does md lack some means
>of dealing with low memory scenarios ?
>
> Dave
>
Dave, this has been a problem since the out_of_memory() function was
changed
between 2.6.10 and 2.6.11. Before this change out_of_memory() required
multiple
calls within 5 seconds before actually OOM killed a process. After the
change(in 2.6.11)
a single call to out_of_memory() results in OOM killing a process. The
following patch
allows the 2.6.18 system to run under much more memory pressure before
it OOM kills.
[-- Attachment #2: oomkill.patch --]
[-- Type: text/plain, Size: 2191 bytes --]
--- linux-2.6.18.noarch/mm/oom_kill.c.orig
+++ linux-2.6.18.noarch/mm/oom_kill.c
@@ -306,6 +306,69 @@ static int oom_kill_process(struct task_
return oom_kill_task(p, message);
}
+int should_oom_kill(void)
+{
+ static spinlock_t oom_lock = SPIN_LOCK_UNLOCKED;
+ static unsigned long first, last, count, lastkill;
+ unsigned long now, since;
+ int ret = 0;
+
+ spin_lock(&oom_lock);
+ now = jiffies;
+ since = now - last;
+ last = now;
+
+ /*
+ * If it's been a long time since last failure,
+ * we're not oom.
+ */
+ if (since > 5*HZ)
+ goto reset;
+
+ /*
+ * If we haven't tried for at least one second,
+ * we're not really oom.
+ */
+ since = now - first;
+ if (since < HZ)
+ goto out_unlock;
+
+ /*
+ * If we have gotten only a few failures,
+ * we're not really oom.
+ */
+ if (++count < 10)
+ goto out_unlock;
+
+ /*
+ * If we just killed a process, wait a while
+ * to give that task a chance to exit. This
+ * avoids killing multiple processes needlessly.
+ */
+ since = now - lastkill;
+ if (since < HZ*5)
+ goto out_unlock;
+
+ /*
+ * Ok, really out of memory. Kill something.
+ */
+ lastkill = now;
+ ret = 1;
+
+reset:
+/*
+ * We dropped the lock above, so check to be sure the variable
+ * first only ever increases to prevent false OOM's.
+ */
+ if (time_after(now, first))
+ first = now;
+ count = 0;
+
+out_unlock:
+ spin_unlock(&oom_lock);
+ return ret;
+}
+
/**
* out_of_memory - kill the "best" process when we run out of memory
*
@@ -326,6 +389,9 @@ void out_of_memory(struct zonelist *zone
show_mem();
}
+ if (!should_oom_kill())
+ return;
+
cpuset_lock();
read_lock(&tasklist_lock);
--- linux-2.6.18.noarch/mm/vmscan.c.orig
+++ linux-2.6.18.noarch/mm/vmscan.c
@@ -999,10 +999,8 @@ unsigned long try_to_free_pages(struct z
reclaim_state->reclaimed_slab = 0;
}
total_scanned += sc.nr_scanned;
- if (nr_reclaimed >= sc.swap_cluster_max) {
- ret = 1;
+ if (nr_reclaimed >= sc.swap_cluster_max)
goto out;
- }
/*
* Try to write back as many pages as we just scanned. This
@@ -1030,6 +1028,8 @@ out:
zone->prev_priority = zone->temp_priority;
}
+ if (nr_reclaimed)
+ ret = 1;
return ret;
}
next reply other threads:[~2006-09-29 19:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-29 20:03 Larry Woodman [this message]
2006-09-29 21:34 ` oom kill oddness Dave Jones
-- strict thread matches above, loose matches on Subject: below --
2006-09-27 20:54 Dave Jones
2006-09-27 23:59 ` Andrew Morton
2006-09-28 23:03 ` Roman Zippel
2006-09-29 0:17 ` Andrew Morton
2006-09-29 0:22 ` Dave Jones
2006-09-29 0:57 ` Roman Zippel
2006-09-29 1:39 ` Nick Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=451D7C02.2090907@redhat.com \
--to=lwoodman@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.