From: Henne <henne@nachtwindheim.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] scsi: convert ninja driver to struct scsi_cmnd
Date: Sat, 30 Sep 2006 22:35:17 +0200 [thread overview]
Message-ID: <451ED505.3090607@nachtwindheim.de> (raw)
Changes the obsolete typedefd Scsi_Cmnd to struct scsi_cmnd in
the ninja scsi pcmcia driver.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
---
nsp_cs.c | 42 ++++++++++++++++++++++--------------------
nsp_cs.h | 46 +++++++++++++++++++++++++---------------------
nsp_debug.c | 4 ++--
nsp_message.c | 4 ++--
4 files changed, 51 insertions(+), 45 deletions(-)
diff -ruN linux-2.6/drivers/scsi/pcmcia/nsp_cs.c linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_cs.c
--- linux-2.6/drivers/scsi/pcmcia/nsp_cs.c 2006-08-01 01:31:43.000000000 +0200
+++ linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_cs.c 2006-09-30 22:08:48.000000000 +0200
@@ -184,7 +184,7 @@
* Clenaup parameters and call done() functions.
* You must be set SCpnt->result before call this function.
*/
-static void nsp_scsi_done(Scsi_Cmnd *SCpnt)
+static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -193,7 +193,8 @@
SCpnt->scsi_done(SCpnt);
}
-static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+ void (*done)(struct scsi_cmnd *))
{
#ifdef NSP_DEBUG
/*unsigned int host_id = SCpnt->device->host->this_id;*/
@@ -366,7 +367,7 @@
/*
* Start selection phase
*/
-static int nsphw_start_selection(Scsi_Cmnd *SCpnt)
+static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
{
unsigned int host_id = SCpnt->device->host->this_id;
unsigned int base = SCpnt->device->host->io_port;
@@ -447,7 +448,7 @@
/*
* setup synchronous data transfer mode
*/
-static int nsp_analyze_sdtr(Scsi_Cmnd *SCpnt)
+static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
{
unsigned char target = scmd_id(SCpnt);
// unsigned char lun = SCpnt->device->lun;
@@ -505,7 +506,7 @@
/*
* start ninja hardware timer
*/
-static void nsp_start_timer(Scsi_Cmnd *SCpnt, int time)
+static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -518,7 +519,8 @@
/*
* wait for bus phase change
*/
-static int nsp_negate_signal(Scsi_Cmnd *SCpnt, unsigned char mask, char *str)
+static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
+ char *str)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned char reg;
@@ -545,9 +547,9 @@
/*
* expect Ninja Irq
*/
-static int nsp_expect_signal(Scsi_Cmnd *SCpnt,
- unsigned char current_phase,
- unsigned char mask)
+static int nsp_expect_signal(struct scsi_cmnd *SCpnt,
+ unsigned char current_phase,
+ unsigned char mask)
{
unsigned int base = SCpnt->device->host->io_port;
int time_out;
@@ -580,7 +582,7 @@
/*
* transfer SCSI message
*/
-static int nsp_xfer(Scsi_Cmnd *SCpnt, int phase)
+static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -620,7 +622,7 @@
/*
* get extra SCSI data from fifo
*/
-static int nsp_dataphase_bypass(Scsi_Cmnd *SCpnt)
+static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
unsigned int count;
@@ -652,7 +654,7 @@
/*
* accept reselection
*/
-static int nsp_reselected(Scsi_Cmnd *SCpnt)
+static int nsp_reselected(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int host_id = SCpnt->device->host->this_id;
@@ -691,7 +693,7 @@
/*
* count how many data transferd
*/
-static int nsp_fifo_count(Scsi_Cmnd *SCpnt)
+static int nsp_fifo_count(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int count;
@@ -718,7 +720,7 @@
/*
* read data in DATA IN phase
*/
-static void nsp_pio_read(Scsi_Cmnd *SCpnt)
+static void nsp_pio_read(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned long mmio_base = SCpnt->device->host->base;
@@ -813,7 +815,7 @@
/*
* write data in DATA OUT phase
*/
-static void nsp_pio_write(Scsi_Cmnd *SCpnt)
+static void nsp_pio_write(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned long mmio_base = SCpnt->device->host->base;
@@ -906,7 +908,7 @@
/*
* setup synchronous/asynchronous data transfer mode
*/
-static int nsp_nexus(Scsi_Cmnd *SCpnt)
+static int nsp_nexus(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned char target = scmd_id(SCpnt);
@@ -953,7 +955,7 @@
{
unsigned int base;
unsigned char irq_status, irq_phase, phase;
- Scsi_Cmnd *tmpSC;
+ struct scsi_cmnd *tmpSC;
unsigned char target, lun;
unsigned int *sync_neg;
int i, tmp;
@@ -1531,7 +1533,7 @@
/*---------------------------------------------------------------*/
/*
-static int nsp_eh_abort(Scsi_Cmnd *SCpnt)
+static int nsp_eh_abort(struct scsi_cmnd *SCpnt)
{
nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
@@ -1559,7 +1561,7 @@
return SUCCESS;
}
-static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt)
+static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -1568,7 +1570,7 @@
return nsp_bus_reset(data);
}
-static int nsp_eh_host_reset(Scsi_Cmnd *SCpnt)
+static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
diff -ruN linux-2.6/drivers/scsi/pcmcia/nsp_cs.h linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_cs.h
--- linux-2.6/drivers/scsi/pcmcia/nsp_cs.h 2006-08-01 01:31:43.000000000 +0200
+++ linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_cs.h 2006-09-30 22:18:02.000000000 +0200
@@ -266,7 +266,7 @@
int TimerCount;
int SelectionTimeOut;
- Scsi_Cmnd *CurrentSC;
+ struct scsi_cmnd *CurrentSC;
//int CurrnetTarget;
int FifoCount;
@@ -319,30 +319,34 @@
int hostno,
#endif
int inout);
-static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt));
+static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+ void (* done)(struct scsi_cmnd *SCpnt));
/* Error handler */
-/*static int nsp_eh_abort (Scsi_Cmnd *SCpnt);*/
-/*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/
-static int nsp_eh_bus_reset (Scsi_Cmnd *SCpnt);
-static int nsp_eh_host_reset (Scsi_Cmnd *SCpnt);
+/*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/
+/*static int nsp_eh_device_reset(struct scsi_cmnd *SCpnt);*/
+static int nsp_eh_bus_reset (struct scsi_cmnd *SCpnt);
+static int nsp_eh_host_reset (struct scsi_cmnd *SCpnt);
static int nsp_bus_reset (nsp_hw_data *data);
/* */
static int nsphw_init (nsp_hw_data *data);
-static int nsphw_start_selection(Scsi_Cmnd *SCpnt);
-static void nsp_start_timer (Scsi_Cmnd *SCpnt, int time);
-static int nsp_fifo_count (Scsi_Cmnd *SCpnt);
-static void nsp_pio_read (Scsi_Cmnd *SCpnt);
-static void nsp_pio_write (Scsi_Cmnd *SCpnt);
-static int nsp_nexus (Scsi_Cmnd *SCpnt);
-static void nsp_scsi_done (Scsi_Cmnd *SCpnt);
-static int nsp_analyze_sdtr (Scsi_Cmnd *SCpnt);
-static int nsp_negate_signal (Scsi_Cmnd *SCpnt, unsigned char mask, char *str);
-static int nsp_expect_signal (Scsi_Cmnd *SCpnt, unsigned char current_phase, unsigned char mask);
-static int nsp_xfer (Scsi_Cmnd *SCpnt, int phase);
-static int nsp_dataphase_bypass (Scsi_Cmnd *SCpnt);
-static int nsp_reselected (Scsi_Cmnd *SCpnt);
+static int nsphw_start_selection(struct scsi_cmnd *SCpnt);
+static void nsp_start_timer (struct scsi_cmnd *SCpnt, int time);
+static int nsp_fifo_count (struct scsi_cmnd *SCpnt);
+static void nsp_pio_read (struct scsi_cmnd *SCpnt);
+static void nsp_pio_write (struct scsi_cmnd *SCpnt);
+static int nsp_nexus (struct scsi_cmnd *SCpnt);
+static void nsp_scsi_done (struct scsi_cmnd *SCpnt);
+static int nsp_analyze_sdtr (struct scsi_cmnd *SCpnt);
+static int nsp_negate_signal (struct scsi_cmnd *SCpnt,
+ unsigned char mask, char *str);
+static int nsp_expect_signal (struct scsi_cmnd *SCpnt,
+ unsigned char current_phase,
+ unsigned char mask);
+static int nsp_xfer (struct scsi_cmnd *SCpnt, int phase);
+static int nsp_dataphase_bypass (struct scsi_cmnd *SCpnt);
+static int nsp_reselected (struct scsi_cmnd *SCpnt);
static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
/* Interrupt handler */
@@ -355,8 +359,8 @@
/* Debug */
#ifdef NSP_DEBUG
-static void show_command (Scsi_Cmnd *SCpnt);
-static void show_phase (Scsi_Cmnd *SCpnt);
+static void show_command (struct scsi_cmnd *SCpnt);
+static void show_phase (struct scsi_cmnd *SCpnt);
static void show_busphase(unsigned char stat);
static void show_message (nsp_hw_data *data);
#else
diff -ruN linux-2.6/drivers/scsi/pcmcia/nsp_debug.c linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_debug.c
--- linux-2.6/drivers/scsi/pcmcia/nsp_debug.c 2006-08-01 01:31:43.000000000 +0200
+++ linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_debug.c 2006-09-30 22:18:48.000000000 +0200
@@ -138,12 +138,12 @@
printk("\n");
}
-static void show_command(Scsi_Cmnd *SCpnt)
+static void show_command(struct scsi_cmnd *SCpnt)
{
print_commandk(SCpnt->cmnd);
}
-static void show_phase(Scsi_Cmnd *SCpnt)
+static void show_phase(struct scsi_cmnd *SCpnt)
{
int i = SCpnt->SCp.phase;
diff -ruN linux-2.6/drivers/scsi/pcmcia/nsp_message.c linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_message.c
--- linux-2.6/drivers/scsi/pcmcia/nsp_message.c 2006-08-01 01:31:43.000000000 +0200
+++ linux-2.6.18-git14/drivers/scsi/pcmcia/nsp_message.c 2006-09-30 22:20:18.000000000 +0200
@@ -8,7 +8,7 @@
/* $Id: nsp_message.c,v 1.6 2003/07/26 14:21:09 elca Exp $ */
-static void nsp_message_in(Scsi_Cmnd *SCpnt)
+static void nsp_message_in(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -50,7 +50,7 @@
}
-static void nsp_message_out(Scsi_Cmnd *SCpnt)
+static void nsp_message_out(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
int ret = 1;
reply other threads:[~2006-09-30 20:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=451ED505.3090607@nachtwindheim.de \
--to=henne@nachtwindheim.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.