From: Henne <henne@nachtwindheim.de>
To: Andrew Morton <akpm@osdl.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] scsi: Scsi_Cmnd conversion in qlogicfas408 driver
Date: Tue, 03 Oct 2006 21:31:14 +0200 [thread overview]
Message-ID: <4522BA82.60604@nachtwindheim.de> (raw)
Change obsolete Scsi_Cmnd to struct scsi_cmnd in the Qlocic FAS408 driver.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
---
qlogicfas408.c | 18 +++++++++---------
qlogicfas408.h | 30 +++++++++++++++---------------
2 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index 52fb2ec..2a75485 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -209,7 +209,7 @@ static int ql_wai(struct qlogicfas408_pr
* caller must hold host lock
*/
-static void ql_icmd(Scsi_Cmnd * cmd)
+static void ql_icmd(struct scsi_cmnd *cmd)
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
int qbase = priv->qbase;
@@ -256,7 +256,7 @@ static void ql_icmd(Scsi_Cmnd * cmd)
* Process scsi command - usually after interrupt
*/
-static unsigned int ql_pcmd(Scsi_Cmnd * cmd)
+static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
{
unsigned int i, j;
unsigned long k;
@@ -407,7 +407,7 @@ static unsigned int ql_pcmd(Scsi_Cmnd *
static void ql_ihandl(int irq, void *dev_id, struct pt_regs *regs)
{
- Scsi_Cmnd *icmd;
+ struct scsi_cmnd *icmd;
struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
struct qlogicfas408_priv *priv = get_priv_by_host(host);
int qbase = priv->qbase;
@@ -447,7 +447,8 @@ irqreturn_t qlogicfas408_ihandl(int irq,
* Queued command
*/
-int qlogicfas408_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
+ void (*done) (struct scsi_cmnd *))
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
if (scmd_id(cmd) == priv->qinitid) {
@@ -470,9 +471,8 @@ int qlogicfas408_queuecommand(Scsi_Cmnd
* Return bios parameters
*/
-int qlogicfas408_biosparam(struct scsi_device * disk,
- struct block_device *dev,
- sector_t capacity, int ip[])
+int qlogicfas408_biosparam(struct scsi_device *disk, struct block_device *dev,
+ sector_t capacity, int ip[])
{
/* This should mimic the DOS Qlogic driver's behavior exactly */
ip[0] = 0x40;
@@ -494,7 +494,7 @@ #endif
* Abort a command in progress
*/
-int qlogicfas408_abort(Scsi_Cmnd * cmd)
+int qlogicfas408_abort(struct scsi_cmnd *cmd)
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
priv->qabort = 1;
@@ -508,7 +508,7 @@ int qlogicfas408_abort(Scsi_Cmnd * cmd)
* the PCMCIA qlogic_stub code. This wants fixing
*/
-int qlogicfas408_bus_reset(Scsi_Cmnd * cmd)
+int qlogicfas408_bus_reset(struct scsi_cmnd *cmd)
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
unsigned long flags;
diff --git a/drivers/scsi/qlogicfas408.h b/drivers/scsi/qlogicfas408.h
index 4b3df20..ee3e23e 100644
--- a/drivers/scsi/qlogicfas408.h
+++ b/drivers/scsi/qlogicfas408.h
@@ -75,15 +75,15 @@ #define SYNCOFFST 0
/*----------------------------------------------------------------*/
struct qlogicfas408_priv {
- int qbase; /* Port */
- int qinitid; /* initiator ID */
- int qabort; /* Flag to cause an abort */
- int qlirq; /* IRQ being used */
- int int_type; /* type of irq, 2 for ISA board, 0 for PCMCIA */
- char qinfo[80]; /* description */
- Scsi_Cmnd *qlcmd; /* current command being processed */
- struct Scsi_Host *shost; /* pointer back to host */
- struct qlogicfas408_priv *next; /* next private struct */
+ int qbase; /* Port */
+ int qinitid; /* initiator ID */
+ int qabort; /* Flag to cause an abort */
+ int qlirq; /* IRQ being used */
+ int int_type; /* type of irq, 2 for ISA board, 0 for PCMCIA */
+ char qinfo[80]; /* description */
+ struct scsi_cmnd *qlcmd; /* current command being processed */
+ struct Scsi_Host *shost; /* pointer back to host */
+ struct qlogicfas408_priv *next; /* next private struct */
};
/* The qlogic card uses two register maps - These macros select which one */
@@ -103,12 +103,12 @@ #define get_priv_by_cmd(x) (struct qlogi
#define get_priv_by_host(x) (struct qlogicfas408_priv *)&((x)->hostdata[0])
irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id, struct pt_regs *regs);
-int qlogicfas408_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
-int qlogicfas408_biosparam(struct scsi_device * disk,
- struct block_device *dev,
- sector_t capacity, int ip[]);
-int qlogicfas408_abort(Scsi_Cmnd * cmd);
-int qlogicfas408_bus_reset(Scsi_Cmnd * cmd);
+int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
+ void (*done) (struct scsi_cmnd *));
+int qlogicfas408_biosparam(struct scsi_device * disk, struct block_device *dev,
+ sector_t capacity, int ip[]);
+int qlogicfas408_abort(struct scsi_cmnd *cmd);
+int qlogicfas408_bus_reset(struct scsi_cmnd *cmd);
const char *qlogicfas408_info(struct Scsi_Host *host);
int qlogicfas408_get_chip_type(int qbase, int int_type);
void qlogicfas408_setup(int qbase, int id, int int_type);
reply other threads:[~2006-10-03 19:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4522BA82.60604@nachtwindheim.de \
--to=henne@nachtwindheim.de \
--cc=James.Bottomley@SteelEye.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.