Re: speedstep-centrino on merom

Re: speedstep-centrino on merom

[Jeremy Fitzhardinge]

Johannes Petersson wrote:
> Hello there
>
> I've just built a system with a Core 2 Duo T7200 (merom) processor. And the
> reason I write you is cause the speed stepping does not seem to work
> perfectly on this new processor. When I try to load the speedstep-centrino
> module I get the following:
>
> modprobe -v speedstep-centrino
> insmod
> /lib/modules/2.6.15-27-686/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko
>   
This is a fairly old kernel, and there has been quite a bit of work on 
this area lately.  I'm not actively maintaining speedstep-centrino 
anymore; you should post this to cpufreq@lists.linux.org.uk (cc:'d).

> FATAL: Error inserting speedstep_centrino
> (/lib/modules/2.6.15-27-686/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko):
> No such device
>
> If I load the acpi-cpufreq module instead it works okay, but the available
> speedstepping frequenzies are only:
> 1200000 1000000 800000 600000
> And since this is a 2 GHz processor I want it to be able to run at 2 GHz as
> well. 
> This problem, I suppose, is probably due to a faulty DSDT reported by the
> bios. 
>
> I would really like to use the speedstep-centrino module instead. I work as
> a C/C++ programmer, so what I did was open the speedstep-centrino.c file in
> the linux source, and from what I can see there there is no support for
> merom (or yonah).
>
> So my question to you is if there is any work beeing done on this module to
> support Core 2 Duo (merom) processors? Or is the recommended way to go, to
> use the acpi-cpufreq instead? Or if you could guide me a little to maybe add
> support for Merom?
>   

    J