Re: Problem with initrd

["David H. Lynch Jr." <dhlii@dlasys.net>]

Glenn.G.Hart@us.westinghouse.com wrote:
> I am trying to get Linux running on the PPC of a Xilinx V4-FX12 FPGA.  I am
> using the Linux 2.6.17.9 kernel (I have also tried 2.6.17.1 with the same
> results) and have gotten through the kernel initialization to the point
> where it mounts the root file system.  At this point I can an Oops and a
> kernel panic.  I traced the kernel and found it was happening on the gunzip
> of the ramdisk image.  I tried without compressing the ramdisk image and I
> got a slightly different error.  I have attached this output as well.  I am
> not a kernel expert, but I am guessing it is having trouble accessing the
> RAM for the ramdisk.  Can anybody offer some advice?
>   
    Try 2.6.18 or 2.6.16 . There were compression/decompression problems 
in 2.6.17 for the ppc.
    These may be your problem.


> Thanks,
> Glenn
>
> With compress ramdisk image:
>
> loaded at:     00400000 0052B13C
> board data at: 00529124 0052913C
> relocated to:  004050F0 00405108
> zimage at:     00405805 004D072E
> initrd at:     004D1000 00528981
> avail ram:     0052C000 10000000
>
> Linux/PPC load: console=ttyS0,9600 console=tty0 root=/dev/ram rw
> Uncompressing Linux...done.
> Now booting the kernel
> initrd start c04d1000 end c0528981
> Linux version 2.6.17.9 (root@AFedora3) (gcc version 3.4.5) #32 PREEMPT Tue
> Oct 3 23:25:12 EDT 2006
> Xilinx Virtex-II Pro port
> Port by MontaVista Software, Inc. (source@mvista.com)
> Built 1 zonelists
> Kernel command line: console=ttyS0,9600 console=tty0 root=/dev/ram rw
> Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 257408k available (1424k kernel code, 368k data, 80k init, 0k
> highmem)
> Mount-cache hash table entries: 512
> checking if image is initramfs...it isn't (no cpio magic); looks like an
> initrd
> Freeing initrd memory: 350k freed
> NET: Registered protocol family 16
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 8192 bind 4096)
> TCP reno registered
> io scheduler noop registered (default)
> Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
> serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 1) is a 16450
> RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 2 devices)
> nbd: registered device at major 43
> eth0: using fifo mode.
> eth0: Xilinx EMAC #0 at 0x80400000 mapped to 0xD1000000, irq=0
> eth0: id 2.0a; block id 0, type 8
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RAMDISK: Compressed image found at block 0
> allocated in buffer
> allocated window buffer
> make crc
> gunzip
> Oops: kernel access of bad area, sig: 11 [#1]
> PREEMPT
> NIP: C004115C LR: C0041148 CTR: C00FA29C
> REGS: c0421610 TRAP: 0300   Not tainted  (2.6.17.9)
> MSR: 00029030 <EE,ME,IR,DR>  CR: 35035093  XER: E0000000
> DAR: 00001000, DSISR: 00800000
> TASK = c0529b10[1] 'swapper' THREAD: c0420000
> GPR00: C0041148 C04216C0 C0529B10 00000000 00000001 00000001 C04216A8
> 00000000
> GPR08: 00000000 00001000 00000400 00000000 35035099 FFFF9620 00000001
> C04216D0
> GPR16: C018CD50 C04C88A0 C052FC08 00000000 00001000 00010000 C052FCA8
> 00000000
> GPR24: 00140000 C0450000 00000000 00001000 C01E3F20 00001000 00001000
> 00000000
> NIP [C004115C] generic_file_buffered_write+0x4ec/0x5bc
> LR [C0041148] generic_file_buffered_write+0x4d8/0x5bc
> Call Trace:
> [C04216C0] [C0041148] generic_file_buffered_write+0x4d8/0x5bc (unreliable)
> [C0421780] [C0041A10] __generic_file_aio_write_nolock+0x4d4/0x50c
> [C0421810] [C0041DB8] generic_file_aio_write_nolock+0x28/0x98
> [C0421830] [C0041EA0] generic_file_write_nolock+0x78/0xa8
> [C04218D0] [C00657F8] blkdev_file_write+0x20/0x30
> [C04218E0] [C005B400] vfs_write+0xc8/0x190
> [C0421900] [C005B5A0] sys_write+0x4c/0x8c
> [C0421930] [C01AD2D4] flush_window+0x34/0xe4
> [C0421950] [C01AD8B8] inflate_codes+0x468/0x4b0
> [C04219A0] [C01AE0E0] inflate_dynamic+0x64c/0x690
> [C0421EE0] [C01AEA1C] rd_load_image+0x8f4/0x106c
> [C0421F40] [C01AF33C] initrd_load+0x4c/0x304
> [C0421F70] [C01ACCB8] prepare_namespace+0xa8/0x11c
> [C0421F90] [C0002580] init+0x1b4/0x280
> [C0421FF0] [C00051FC] kernel_thread+0x44/0x60
> Instruction dump:
> 48006591 2f9d0000 419c001c 7ec3b378 38800001 4800441d 48120851 2f930000
> 409efbe8 8061005c 81210064 2f830000 <92e90000> 93090004 41be0008 48006555
> Kernel panic - not syncing: Attempted to kill init!
>  <0>Rebooting in 180 seconds.
>
>
> With uncompress ramdisk image:
>
> loaded at:     00400000 008D313C
> board data at: 008D1124 008D113C
> relocated to:  004050F0 00405108
> zimage at:     00405805 004D072C
> initrd at:     004D1000 008D1000
> avail ram:     008D4000 10000000
>
> Linux/PPC load: console=ttyS0,9600 console=tty0 root=/dev/ram rw
> Uncompressing Linux...done.
> Now booting the kernel
> initrd start c04d1000 end c08d1000
> Linux version 2.6.17.9 (root@AFedora3) (gcc version 3.4.5) #33 PREEMPT Wed
> Oct 4 00:18:59 EDT 2006
> Xilinx Virtex-II Pro port
> Port by MontaVista Software, Inc. (source@mvista.com)
> Built 1 zonelists
> Kernel command line: console=ttyS0,9600 console=tty0 root=/dev/ram rw
> Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 253696k available (1424k kernel code, 368k data, 80k init, 0k
> highmem)
> Mount-cache hash table entries: 512
> checking if image is initramfs...it isn't (bad gzip magic numbers); looks
> like an initrd
> Freeing initrd memory: 4096k freed
> NET: Registered protocol family 16
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 8192 bind 4096)
> TCP reno registered
> io scheduler noop registered (default)
> Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
> serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 1) is a 16450
> RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 2 devices)
> nbd: registered device at major 43
> eth0: using fifo mode.
> eth0: Xilinx EMAC #0 at 0x80400000 mapped to 0xD1000000, irq=0
> eth0: id 2.0a; block id 0, type 8
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RAMDISK: ext2 filesystem found at block 0
> found ramdisk # blocks = 4096 /initrd.image
> RAMDISK: Loading 4096KiB [1 disk] into ram disk... Oops: Exception in
> kernel mode, sig: 4 [#1]
> PREEMPT
> NIP: C0079058 LR: C0079018 CTR: 00000000
> REGS: c08e1c20 TRAP: 0700   Not tainted  (2.6.17.9)
> MSR: 00029030 <EE,ME,IR,DR>  CR: 35005093  XER: C0000000
> TASK = c04c9b10[1] 'swapper' THREAD: c08e0000
> GPR00: 11A49A00 C08E1CD0 C04C9B10 C08E1CD8 C08E1CB8 00000001 C08D4C00
> 00000003
> GPR08: 11A49A00 11A49A00 11A49A00 C08D26AC 00000400 FFFF9620 00000002
> C08D2664
> GPR16: 00000002 00000001 C08E1EC0 C04C26C0 00000000 C08E1DA0 000003FF
> C08D2704
> GPR24: 00001000 00000000 00400000 00000400 00000001 00000400 00000000
> C08D2664
> NIP [C0079058] touch_atime+0xc4/0xd8
> LR [C0079018] touch_atime+0x84/0xd8
> Call Trace:
> [C08E1CD0] [C0079018] touch_atime+0x84/0xd8 (unreliable)
> [C08E1CF0] [C003FBF0] do_generic_mapping_read+0x490/0x4a4
> [C08E1D90] [C00420BC] __generic_file_aio_read+0x1ec/0x238
> [C08E1DE0] [C0042238] generic_file_read+0x88/0xb8
> [C08E1E90] [C005B16C] vfs_read+0xc8/0x190
> [C08E1EB0] [C005B514] sys_read+0x4c/0x8c
> [C08E1EE0] [C01AF100] rd_load_image+0xfd8/0x106c
> [C08E1F40] [C01AF33C] initrd_load+0x4c/0x304
> [C08E1F70] [C01ACCB8] prepare_namespace+0xa8/0x11c
> [C08E1F90] [C0002580] init+0x1b4/0x280
> [C08E1FF0] [C00051FC] kernel_thread+0x44/0x60
> Instruction dump:
> 409e0014 800b0004 8121000c 7f804800 419e0020 81210008 8141000c 7fe3fb78
> 913f0048 915f004c 38800001 4800b1a1 <00000000> 00000800 7c0803a6 38210020
> Kernel panic - not syncing: Attempted to kill init!
>  <0>Rebooting in 180 seconds..
>
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>   


-- 
Dave Lynch 					  	    DLA Systems
Software Development:  				         Embedded Linux
717.627.3770 	       dhlii@dlasys.net 	  http://www.dlasys.net
fax: 1.253.369.9244 			           Cell: 1.717.587.7774
Over 25 years' experience in platforms, languages, and technologies too numerous to list.

"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein