From: kress@hal.saar.de (Michael Kress)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] Supermicro X6DH8-G2+ / sensors not working
Date: Sat, 14 Oct 2006 16:49:54 +0000 [thread overview]
Message-ID: <45311532.8060304@hal.saar.de> (raw)
In-Reply-To: <451FF905.60001@hal.saar.de>
Michael Kress wrote:
> sorry, it took a bit ... not because I tested for so long time... ;-)
> I've been modprobe'ing und rmmod'ing the driver constantly for an hour
> or so (every few seconds, with 'watch') and I can still receive the
> expected results without any flaw, nothing irregular, no strange syslog
> messages etc.
>
woops, that was a bit too quick - I got that after calling 'sensors'
every 3 seconds for the whole afternoon:
Oct 14 17:19:14 matrix kernel: general protection fault: 0000 [1] SMP
Oct 14 17:19:14 matrix kernel: CPU 0
Oct 14 17:19:14 matrix kernel: Modules linked in: xfs exportfs pc87427
hwmon i2c_isa i2c_core xt_physdev iptable_filter ip_tables x_tables
bridge ipv6 autofs4 sunrpc pcmcia yenta_socket rsrc_nonstatic
pcmcia_core joydev video thermal processor fan container button battery
ac uhci_hcd ehci_hcd e1000 dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod
3w_9xxx aic79xx scsi_transport_spi sd_mod
Oct 14 17:19:14 matrix kernel: Pid: 16330, comm: sensors Not tainted
2.6.16-xen #2
Oct 14 17:19:14 matrix kernel: RIP: e030:[<ffffffff80178679>]
<ffffffff80178679>{vfs_read+281}
Oct 14 17:19:14 matrix kernel: RSP: e02b:ffff88003b5adf18 EFLAGS: 00010202
Oct 14 17:19:14 matrix kernel: RAX: 0000000000000002 RBX:
4c0841894c01894c RCX: 0000000000000000
Oct 14 17:19:14 matrix kernel: RDX: 0000000000000002 RSI:
0000000000000001 RDI: ffff8800352fe1e0
Oct 14 17:19:14 matrix kernel: RBP: 0000000000000002 R08:
00000000fffffffb R09: 0000000000000000
Oct 14 17:19:14 matrix kernel: R10: 00000000ffffffff R11:
0000000000000000 R12: 0000000000000001
Oct 14 17:19:14 matrix kernel: R13: 00002ba7142df000 R14:
ffff88003b5adf50 R15: 000000000054ff10
Oct 14 17:19:14 matrix kernel: FS: 00002ba7141d98a0(0000)
GS:ffffffff8049b000(0000) knlGS:0000000000000000
Oct 14 17:19:14 matrix kernel: CS: e033 DS: 0000 ES: 0000
Oct 14 17:19:14 matrix kernel: Process sensors (pid: 16330, threadinfo
ffff88003b5ac000, task ffff88003fec8970)
Oct 14 17:19:14 matrix kernel: Stack: ffff880000e3fc80 0000000000001000
00002ba7142df000 fffffffffffffff7
Oct 14 17:19:15 matrix kernel: 0000000000000000 ffffffff80178a23
0000000000000000 0000000000000002
Oct 14 17:19:15 matrix kernel: 0000000000001000 000000000054ff10
Oct 14 17:19:15 matrix kernel: Call Trace:
<ffffffff80178a23>{sys_read+83} <ffffffff8010b206>{system_call+134}
Oct 14 17:19:16 matrix kernel: <ffffffff8010b180>{system_call+0}
Oct 14 17:19:16 matrix kernel:
Oct 14 17:19:16 matrix kernel: Code: 4c 8b 6b 10 48 89 df 41 0f b7 45 4c
25 00 f0 00 00 3d 00 40
Oct 14 17:19:16 matrix kernel: RIP <ffffffff80178679>{vfs_read+281} RSP
<ffff88003b5adf18>
But it only appeared once, I normally load the module once, then I call
it every 3 sec over the whole day. The only difference today: I loaded
the module lots of times today.
Another difference: I activated MSI in the kernel in order to solve this
problem: http://www.ussg.iu.edu/hypermail/linux/kernel/0610.1/0101.html
CONFIG_PCI_MSI=y
Salut - Michael
--
Michael Kress, kress at hal.saar.de
http://www.michael-kress.de / http://kress.net
P E N G U I N S A R E C O O L
next prev parent reply other threads:[~2006-10-14 16:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-01 17:21 [lm-sensors] Supermicro X6DH8-G2+ / sensors not working Michael Kress
2006-10-04 13:15 ` Jean Delvare
2006-10-04 23:14 ` Michael Kress
2006-10-06 11:09 ` Jean Delvare
2006-10-07 7:35 ` Jean Delvare
2006-10-08 9:14 ` Michael Kress
2006-10-08 9:17 ` Jean Delvare
2006-10-08 10:25 ` Michael Kress
2006-10-08 10:59 ` Michael Kress
2006-10-08 12:21 ` Jean Delvare
2006-10-08 13:07 ` Michael Kress
2006-10-08 13:46 ` Jean Delvare
2006-10-08 14:42 ` Michael Kress
2006-10-08 17:03 ` Jean Delvare
2006-10-08 17:20 ` Michael Kress
2006-10-09 9:23 ` Jean Delvare
2006-10-09 18:03 ` Michael Kress
2006-10-09 20:03 ` Jean Delvare
2006-10-09 20:25 ` Michael Kress
2006-10-10 10:21 ` Jean Delvare
2006-10-14 11:43 ` Michael Kress
2006-10-14 16:49 ` Michael Kress [this message]
2006-10-15 9:03 ` Michael Kress
2006-10-15 12:03 ` Jean Delvare
2006-10-15 20:56 ` Michael Kress
2006-10-16 6:27 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45311532.8060304@hal.saar.de \
--to=kress@hal.saar.de \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.