From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wink Saville Subject: Patch for nvidia divide by zero error for 7600 pci-express card Date: Sat, 14 Oct 2006 12:47:22 -0700 Message-ID: <45313ECA.4070801@saville.com> Reply-To: linux-fbdev-devel@lists.sourceforge.net Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from sc8-sf-mx2-b.sourceforge.net ([10.3.1.92] helo=mail.sourceforge.net) by sc8-sf-list1-new.sourceforge.net with esmtp (Exim 4.43) id 1GYpTd-0006Of-QD for linux-fbdev-devel@lists.sourceforge.net; Sat, 14 Oct 2006 12:47:21 -0700 Received: from [70.91.206.233] (helo=saville.com) by mail.sourceforge.net with esmtps (TLSv1:AES256-SHA:256) (Exim 4.44) id 1GYpTc-0006i7-Nu for linux-fbdev-devel@lists.sourceforge.net; Sat, 14 Oct 2006 12:47:21 -0700 Received: from [192.168.0.52] (unknown [192.168.0.52]) by saville.com (Postfix) with ESMTP id 156885781A for ; Sat, 14 Oct 2006 12:44:41 -0700 (PDT) List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-fbdev-devel-bounces@lists.sourceforge.net Errors-To: linux-fbdev-devel-bounces@lists.sourceforge.net To: linux-fbdev-devel@lists.sourceforge.net Hello, The following patch resolves the divide by zero error I encountered on my system: http://marc.10east.com/?l=linux-fbdev-devel&m=116058257024413&w=2 I accomplished this by merging what I thought was appropriate from: http://webcvs.freedesktop.org/xorg/driver/xf86-video-nv/src/ If this is incorrect please give me some guidance and I'll make any changes that may be needed. One significant item remaining to get the framebuffer console to work, I must have something wrong with my configuration. Following the diff I've included my log and configuration. Regards, Wink Saville diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e34bd03..60df916 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2247,6 +2247,22 @@ static void serial8250_console_putchar(s serial_out(up, UART_TX, ch); } +void lldb_wrch(int port_idx, char ch) +{ + serial8250_console_putchar((struct uart_port *)&serial8250_ports[port_idx], ch); +} +EXPORT_SYMBOL(lldb_wrch); + +void lldb_wrstr(int port_idx, const char *str) +{ + int ch; + + while((ch = *str++)) { + lldb_wrch(port_idx, ch); + } +} +EXPORT_SYMBOL(lldb_wrstr); + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c index 9ed640d..b2a4521 100644 --- a/drivers/video/nvidia/nv_hw.c +++ b/drivers/video/nvidia/nv_hw.c @@ -145,12 +145,18 @@ static void nvGetClocks(struct nvidia_pa if (par->Architecture >= NV_ARCH_40) { pll = NV_RD32(par->PMC, 0x4020); - P = (pll >> 16) & 0x03; + P = (pll >> 16) & 0x07; pll = NV_RD32(par->PMC, 0x4024); M = pll & 0xFF; N = (pll >> 8) & 0xFF; - MB = (pll >> 16) & 0xFF; - NB = (pll >> 24) & 0xFF; + if(((par->Chipset & 0xfff0) == 0x0290) || + ((par->Chipset & 0xfff0) == 0x0390)) { + MB = 1; + NB = 1; + } else { + MB = (pll >> 16) & 0xFF; + NB = (pll >> 24) & 0xFF; + } *MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P; pll = NV_RD32(par->PMC, 0x4000); diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c index a18a9ae..61dc46f 100644 --- a/drivers/video/nvidia/nv_setup.c +++ b/drivers/video/nvidia/nv_setup.c @@ -359,6 +359,7 @@ int NVCommonSetup(struct fb_info *info) case 0x0186: case 0x0187: case 0x018D: + case 0x0228: case 0x0286: case 0x028C: case 0x0316: @@ -382,6 +383,10 @@ int NVCommonSetup(struct fb_info *info) case 0x034C: case 0x0160: case 0x0166: + case 0x0169: + case 0x016B: + case 0x016C: + case 0x016D: case 0x00C8: case 0x00CC: case 0x0144: @@ -639,12 +644,23 @@ int NVCommonSetup(struct fb_info *info) par->fpHeight = NV_RD32(par->PRAMDAC, 0x0800) + 1; par->fpSyncs = NV_RD32(par->PRAMDAC, 0x0848) & 0x30000033; - printk("Panel size is %i x %i\n", par->fpWidth, par->fpHeight); + printk("nvidiafb: Panel size is %i x %i\n", par->fpWidth, par->fpHeight); } if (monA) info->monspecs = *monA; + if (!par->FlatPanel || !par->twoHeads) + par->FPDither = 0; + + par->LVDS = 0; + if (par->FlatPanel && par->twoHeads) { + NV_WR32(par->PRAMDAC0, 0x08B0, 0x00010004); + if (par->PRAMDAC0[0x08b4] & 1) + par->LVDS = 1; + printk("nvidiafb: Panel is %s\n", par->LVDS ? "LVDS" : "TMDS"); + } + kfree(edidA); kfree(edidB); done: diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/nvidia/nv_type.h index acdc266..86e65de 100644 --- a/drivers/video/nvidia/nv_type.h +++ b/drivers/video/nvidia/nv_type.h @@ -129,6 +129,7 @@ struct nvidia_par { int fpHeight; int PanelTweak; int paneltweak; + int LVDS; int pm_state; u32 crtcSync_read; u32 fpSyncs; diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index eb24107..d2839f6 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -1160,20 +1160,20 @@ static u32 __devinit nvidia_get_arch(str case 0x0340: /* GeForceFX 5700 */ arch = NV_ARCH_30; break; - case 0x0040: - case 0x00C0: - case 0x0120: + case 0x0040: /* GeForce 6800 */ + case 0x00C0: /* GeForce 6800 */ + case 0x0120: /* GeForce 6800 */ case 0x0130: - case 0x0140: - case 0x0160: - case 0x01D0: - case 0x0090: - case 0x0210: - case 0x0220: - case 0x0230: - case 0x0240: - case 0x0290: - case 0x0390: + case 0x0140: /* GeForce 6600 */ + case 0x0160: /* GeForce 6200 */ + case 0x01D0: /* GeForce 7200, 7300, 7400 */ + case 0x0090: /* GeForce 7800 */ + case 0x0210: /* GeForce 6800 */ + case 0x0220: /* GeForce 6200 */ + case 0x0230: + case 0x0240: /* GeForce 6100 */ + case 0x0290: /* GeForce 7900 */ + case 0x0390: /* GeForce 7600 */ arch = NV_ARCH_40; break; case 0x0020: /* TNT, TNT2 */ [ 0.000000] Linux version 2.6.19-rc2-w8 (wink@winkc2d1) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #18 SMP Sat Oct 14 11:52:12 PDT 2006 [ 0.000000] Command line: root=/dev/sda2 ro splash initcall_debug console=tty console=ttyS0,115200n81 video=nvidiafb:nomtrr [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) [ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524160 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000) [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515363 [ 0.000000] Kernel command line: root=/dev/sda2 ro splash initcall_debug console=tty console=ttyS0,115200n81 video=nvidiafb:nomtrr [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 93.365502] Console: colour VGA+ 80x25 [ 93.635546] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 93.643383] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 93.650674] Checking aperture... [ 93.674560] Memory: 2058116k/2096640k available (3852k kernel code, 38108k reserved, 1425k data, 236k init) [ 93.763390] Calibrating delay using timer specific routine.. 4811.89 BogoMIPS (lpj=9623787) [ 93.772028] Mount-cache hash table entries: 256 [ 93.776784] CPU: L1 I cache: 32K, L1 D cache: 32K [ 93.781646] CPU: L2 cache: 4096K [ 93.784991] using mwait in idle threads. [ 93.789031] CPU: Physical Processor ID: 0 [ 93.793154] CPU: Processor Core ID: 0 [ 93.796938] CPU0: Thermal monitoring enabled (TM2) [ 93.801856] Freeing SMP alternatives: 40k freed [ 93.806516] ACPI: Core revision 20060707 [ 93.867453] Using local APIC timer interrupts. [ 93.913516] result 16695416 [ 93.916430] Detected 16.695 MHz APIC timer. [ 93.923113] Booting processor 1/2 APIC 0x1 [ 93.937854] Initializing CPU#1 [ 94.018838] Calibrating delay using timer specific routine.. 4808.74 BogoMIPS (lpj=9617483) [ 94.018843] CPU: L1 I cache: 32K, L1 D cache: 32K [ 94.018845] CPU: L2 cache: 4096K [ 94.018847] CPU: Physical Processor ID: 0 [ 94.018848] CPU: Processor Core ID: 1 [ 94.018852] CPU1: Thermal monitoring enabled (TM2) [ 94.019253] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 94.022843] Brought up 2 CPUs [ 94.065371] testing NMI watchdog ... OK. [ 94.109392] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 94.115686] time.c: Detected 2404.140 MHz processor. [ 94.199254] migration_cost=20 [ 94.202662] Calling initcall 0xffffffff8074cad5: cpufreq_tsc+0x0/0x6d() [ 94.209471] Calling initcall 0xffffffff80750b69: init_smp_flush+0x0/0x53() [ 94.216545] Calling initcall 0xffffffff80757038: init_elf32_binfmt+0x0/0xc() [ 94.224250] Calling initcall 0xffffffff807587db: helper_init+0x0/0x2f() [ 94.231071] Calling initcall 0xffffffff80758b1d: pm_init+0x0/0x2a() [ 94.237535] Calling initcall 0xffffffff80758f46: ksysfs_init+0x0/0x2a() [ 94.244349] Calling initcall 0xffffffff8075b17d: filelock_init+0x0/0x31() [ 94.251338] Calling initcall 0xffffffff8075bba4: init_misc_binfmt+0x0/0x35() [ 94.258583] Calling initcall 0xffffffff8075bbd9: init_script_binfmt+0x0/0xc() [ 94.265914] Calling initcall 0xffffffff8075bbe5: init_elf_binfmt+0x0/0xc() [ 94.272986] Calling initcall 0xffffffff807661c1: init_cpufreq_transition_notifier_list+0x0/0x14() [ 94.282145] Calling initcall 0xffffffff80767e26: sock_init+0x0/0x5a() [ 94.288800] Calling initcall 0xffffffff807684f8: netlink_proto_init+0x0/0x159() [ 94.296407] NET: Registered protocol family 16 [ 94.300970] Calling initcall 0xffffffff8075e311: kobject_uevent_init+0x0/0x3c() [ 94.308581] Calling initcall 0xffffffff8075e454: pcibus_class_init+0x0/0xc() [ 94.315828] Calling initcall 0xffffffff8075ec16: pci_driver_init+0x0/0xc() [ 94.322903] Calling initcall 0xffffffff807604bc: dock_init+0x0/0x46() [ 94.329593] Calling initcall 0xffffffff80761681: tty_class_init+0x0/0x2a() [ 94.336663] Calling initcall 0xffffffff80761fea: vtconsole_class_init+0x0/0xb1() [ 94.344394] Calling initcall 0xffffffff8074fc5f: mtrr_if_init+0x0/0x6c() [ 94.351291] Calling initcall 0xffffffff8075ed56: acpi_pci_init+0x0/0x2e() [ 94.358280] ACPI: bus type pci registered [ 94.362408] Calling initcall 0xffffffff8075fd5d: init_acpi_device_notify+0x0/0x4b() [ 94.370359] Calling initcall 0xffffffff80766ded: pci_access_init+0x0/0x3c() [ 94.377524] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved [ 94.384072] PCI: Not using MMCONFIG. [ 94.387762] PCI: Using configuration type 1 [ 94.392060] Calling initcall 0xffffffff8074fade: mtrr_init_finialize+0x0/0x34() [ 94.399666] Calling initcall 0xffffffff807557b5: topology_init+0x0/0x2f() [ 94.406689] Calling initcall 0xffffffff807585ae: param_sysfs_init+0x0/0x187() [ 94.415061] Calling initcall 0xffffffff80247160: pm_sysrq_init+0x0/0x19() [ 94.422048] Calling initcall 0xffffffff8075b80d: init_bio+0x0/0xff() [ 94.428646] Calling initcall 0xffffffff8075e1fb: genhd_device_init+0x0/0x4d() [ 94.436015] Calling initcall 0xffffffff8075edfd: fbmem_init+0x0/0x96() [ 94.442743] Calling initcall 0xffffffff8075fb74: acpi_init+0x0/0x1e9() [ 94.457798] ACPI: Interpreter enabled [ 94.461579] ACPI: Using IOAPIC for interrupt routing [ 94.466700] Calling initcall 0xffffffff8076009f: acpi_ec_init+0x0/0x64() [ 94.473594] Calling initcall 0xffffffff8076077f: acpi_pci_root_init+0x0/0x28() [ 94.481627] Calling initcall 0xffffffff807607c7: acpi_pci_link_init+0x0/0x48() [ 94.489142] Calling initcall 0xffffffff8076094d: acpi_power_init+0x0/0x77() [ 94.496294] Calling initcall 0xffffffff80760ae7: acpi_system_init+0x0/0xc0() [ 94.503541] Calling initcall 0xffffffff80760ba7: acpi_event_init+0x0/0x3d() [ 94.510702] Calling initcall 0xffffffff80760be4: acpi_scan_init+0x0/0x1a8() [ 94.518678] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 94.525253] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 94.531840] PCI: Transparent bridge - 0000:00:1e.0 [ 94.544010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 94.551887] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 94.559763] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 94.570262] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 94.578139] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 94.586017] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 94.593894] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 94.603077] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 94.610833] Calling initcall 0xffffffff80760ef6: acpi_cm_sbs_init+0x0/0x3() [ 94.617991] Calling initcall 0xffffffff80760ef9: pnp_init+0x0/0x1f() [ 94.624536] Linux Plug and Play Support v0.97 (c) Adam Belay [ 94.630310] Calling initcall 0xffffffff807610fb: pnpacpi_init+0x0/0x6a() [ 94.637207] pnp: PnP ACPI init [ 94.642729] pnp: PnP ACPI: found 13 devices [ 94.647027] Calling initcall 0xffffffff80761b00: misc_init+0x0/0x80() [ 94.653672] Calling initcall 0xffffffff8049c9db: cn_init+0x0/0xc9() [ 94.660162] Calling initcall 0xffffffff80764d64: init_scsi+0x0/0x82() [ 94.666902] SCSI subsystem initialized [ 94.670765] Calling initcall 0xffffffff8076541b: usb_init+0x0/0x103() [ 94.677439] usbcore: registered new interface driver usbfs [ 94.683059] usbcore: registered new interface driver hub [ 94.688511] usbcore: registered new device driver usb [ 94.693673] Calling initcall 0xffffffff8076575a: serio_init+0x0/0xbd() [ 94.700407] Calling initcall 0xffffffff80765c9d: input_init+0x0/0x116() [ 94.707222] Calling initcall 0xffffffff8076608f: rtc_init+0x0/0x42() [ 94.713776] Calling initcall 0xffffffff807660d1: rtc_sysfs_init+0x0/0xc() [ 94.720760] Calling initcall 0xffffffff807660dd: rtc_proc_init+0x0/0xc() [ 94.727660] Calling initcall 0xffffffff807660e9: rtc_dev_init+0x0/0xa4() [ 94.734952] Calling initcall 0xffffffff8076618d: i2c_init+0x0/0x34() [ 94.741531] Calling initcall 0xffffffff80766864: dma_bus_init+0x0/0x2b() [ 94.748428] Calling initcall 0xffffffff80766e29: pci_acpi_init+0x0/0xa4() [ 94.755411] PCI: Using ACPI for IRQ routing [ 94.759712] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 94.768177] Calling initcall 0xffffffff80766ecd: pci_legacy_init+0x0/0x120() [ 94.775431] Calling initcall 0xffffffff80767364: pcibios_irq_init+0x0/0x4a7() [ 94.782770] Calling initcall 0xffffffff8076780b: pcibios_init+0x0/0x66() [ 94.789713] Calling initcall 0xffffffff80767ed5: proto_init+0x0/0x34() [ 94.796436] Calling initcall 0xffffffff8076801e: net_dev_init+0x0/0x221() [ 94.803428] Calling initcall 0xffffffff80768651: genl_init+0x0/0xa5() [ 94.810066] Calling initcall 0xffffffff8074ce2e: late_hpet_init+0x0/0xb2() [ 94.817138] Calling initcall 0xffffffff8074f38f: pci_iommu_init+0x0/0x12() [ 94.824219] PCI-GART: No AMD northbridge found. [ 94.828860] Calling initcall 0xffffffff8075b110: init_pipe_fs+0x0/0x40() [ 94.835757] Calling initcall 0xffffffff80760dc6: acpi_motherboard_init+0x0/0x130() [ 94.844207] Calling initcall 0xffffffff80761000: pnp_system_init+0x0/0xc() [ 94.851308] pnp: 00:06: ioport range 0x290-0x297 has been reserved [ 94.857609] Calling initcall 0xffffffff807613fc: chr_dev_init+0x0/0x7d() [ 94.864664] Calling initcall 0xffffffff80763aed: firmware_class_init+0x0/0x68() [ 94.872269] Calling initcall 0xffffffff8076626a: cpufreq_gov_performance_init+0x0/0xc() [ 94.880567] Calling initcall 0xffffffff80766282: cpufreq_gov_userspace_init+0x0/0x1f() [ 94.888774] Calling initcall 0xffffffff8076689d: pcibios_assign_resources+0x0/0x80() [ 94.896832] PCI: Bridge: 0000:00:01.0 [ 94.900610] IO window: c000-cfff [ 94.904128] MEM window: faa00000-feafffff [ 94.908426] PREFETCH window: cff00000-efefffff [ 94.913157] PCI: Bridge: 0000:00:1c.0 [ 94.916933] IO window: disabled. [ 94.920454] MEM window: disabled. [ 94.924062] PREFETCH window: cfe00000-cfefffff [ 94.928794] PCI: Bridge: 0000:00:1c.3 [ 94.932570] IO window: b000-bfff [ 94.936092] MEM window: fa900000-fa9fffff [ 94.940388] PREFETCH window: disabled. [ 94.944428] PCI: Bridge: 0000:00:1c.4 [ 94.948206] IO window: a000-afff [ 94.951725] MEM window: fa800000-fa8fffff [ 94.956023] PREFETCH window: disabled. [ 94.960062] PCI: Bridge: 0000:00:1e.0 [ 94.963839] IO window: disabled. [ 94.967361] MEM window: fa700000-fa7fffff [ 94.971659] PREFETCH window: disabled. [ 94.975705] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 94.983365] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 94.991398] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 94.999059] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 95.006719] Calling initcall 0xffffffff80768f4e: inet_init+0x0/0x3d4() [ 95.013464] NET: Registered protocol family 2 [ 95.056781] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 95.064162] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 95.073416] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 95.080838] TCP: Hash tables configured (established 262144 bind 65536) [ 95.087563] TCP reno registered [ 95.090867] Calling initcall 0xffffffff8020ccf6: time_init_device+0x0/0x23() [ 95.098183] Calling initcall 0xffffffff8074dcc5: i8259A_init_sysfs+0x0/0x24() [ 95.105537] Calling initcall 0xffffffff8074dca2: init_timer_sysfs+0x0/0x23() [ 95.112806] Calling initcall 0xffffffff8074e1c8: vsyscall_init+0x0/0x9b() [ 95.119792] Calling initcall 0xffffffff8074e7a2: sbf_init+0x0/0xd0() [ 95.126342] Calling initcall 0xffffffff8074f36c: i8237A_init_sysfs+0x0/0x23() [ 95.133702] Calling initcall 0xffffffff8074f857: periodic_mcheck_init+0x0/0x27() [ 95.141398] Calling initcall 0xffffffff8074f70a: mce_init_device+0x0/0x14d() [ 95.148706] Calling initcall 0xffffffff8074f98e: thermal_throttle_init_device+0x0/0x73() [ 95.157099] Calling initcall 0xffffffff8075094b: msr_init+0x0/0x10f() [ 95.163778] Calling initcall 0xffffffff80750a5a: cpuid_init+0x0/0x10f() [ 95.170629] Calling initcall 0xffffffff807521f8: init_lapic_sysfs+0x0/0x33() [ 95.177902] Calling initcall 0xffffffff80752cf7: ioapic_init_sysfs+0x0/0xb7() [ 95.185257] Calling initcall 0xffffffff8075566d: audit_classes_init+0x0/0x8d() [ 95.192785] Calling initcall 0xffffffff80755d59: cache_sysfs_init+0x0/0x46() [ 95.200185] Calling initcall 0xffffffff80756270: x8664_sysctl_init+0x0/0x19() [ 95.207517] Calling initcall 0xffffffff80756d0c: aes_init+0x0/0x313() [ 95.214175] Calling initcall 0xffffffff8075701f: ia32_binfmt_init+0x0/0x19() [ 95.221433] Calling initcall 0xffffffff80757044: init_syscall32+0x0/0x5a() [ 95.228509] Calling initcall 0xffffffff8075709e: init_aout_binfmt+0x0/0xc() [ 95.235665] Calling initcall 0xffffffff807579e9: create_proc_profile+0x0/0x258() [ 95.243361] Calling initcall 0xffffffff80757ecc: ioresources_init+0x0/0x42() [ 95.251058] Calling initcall 0xffffffff80758006: timekeeping_init_device+0x0/0x23() [ 95.259030] Calling initcall 0xffffffff8075826c: uid_cache_init+0x0/0x8a() [ 95.266119] Calling initcall 0xffffffff80758735: init_posix_timers+0x0/0xa6() [ 95.273448] Calling initcall 0xffffffff8075880a: init_posix_cpu_timers+0x0/0xc6() [ 95.281228] Calling initcall 0xffffffff80758947: latency_init+0x0/0x23() [ 95.288130] Calling initcall 0xffffffff80758a00: init_clocksource_sysfs+0x0/0x52() [ 95.296021] Calling initcall 0xffffffff80758a52: init_jiffies_clocksource+0x0/0xc() [ 95.303973] Calling initcall 0xffffffff80758a5e: init+0x0/0x63() [ 95.310190] Calling initcall 0xffffffff80758ac1: proc_dma_init+0x0/0x25() [ 95.317178] Calling initcall 0xffffffff8024389b: percpu_modinit+0x0/0x77() [ 95.324250] Calling initcall 0xffffffff80758af5: kallsyms_init+0x0/0x28() [ 95.331238] Calling initcall 0xffffffff80758b47: crash_notes_memory_init+0x0/0x3f() [ 95.339194] Calling initcall 0xffffffff80758cb8: ikconfig_init+0x0/0x3c() [ 95.346180] Calling initcall 0xffffffff80758d66: audit_init+0x0/0x115() [ 95.352986] audit: initializing netlink socket (disabled) [ 95.358509] audit(1160852503.556:1): initialized [ 95.363239] Calling initcall 0xffffffff80758efc: init_kprobes+0x0/0x4a() [ 95.370143] Calling initcall 0xffffffff80759c05: init_per_zone_pages_min+0x0/0x54() [ 95.378100] Calling initcall 0xffffffff8075a90a: pdflush_init+0x0/0x13() [ 95.385017] Calling initcall 0xffffffff8075a938: kswapd_init+0x0/0x1d() [ 95.391840] Calling initcall 0xffffffff8075a955: setup_vmstat+0x0/0x1a() [ 95.398742] Calling initcall 0xffffffff8075a9d4: procswaps_init+0x0/0x25() [ 95.405814] Calling initcall 0xffffffff8075a9f9: init_tmpfs+0x0/0xc6() [ 95.412553] Calling initcall 0xffffffff8075aabf: cpucache_init+0x0/0x2f() [ 95.419539] Calling initcall 0xffffffff8075b150: fasync_init+0x0/0x2d() [ 95.426355] Calling initcall 0xffffffff8075b758: aio_setup+0x0/0x67() [ 95.433017] Calling initcall 0xffffffff8075b986: inotify_setup+0x0/0xd() [ 95.439913] Calling initcall 0xffffffff8075b993: inotify_user_setup+0x0/0xbc() [ 95.447444] Calling initcall 0xffffffff8075ba4f: eventpoll_init+0x0/0xd0() [ 95.454517] Calling initcall 0xffffffff8075bb1f: init_sys32_ioctl+0x0/0x85() [ 95.461778] Calling initcall 0xffffffff8075bbf1: init_mbcache+0x0/0x20() [ 95.468683] Calling initcall 0xffffffff8075bc11: dquot_init+0x0/0xea() [ 95.475410] VFS: Disk quotas dquot_6.5.1 [ 95.479462] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 95.486009] Calling initcall 0xffffffff8075bcfb: dnotify_init+0x0/0x2d() [ 95.492907] Calling initcall 0xffffffff8075c17f: configfs_init+0x0/0x91() [ 95.500335] Calling initcall 0xffffffff8075c210: init_devpts_fs+0x0/0x33() [ 95.507412] Calling initcall 0xffffffff8075c243: init_reiserfs_fs+0x0/0x8e() [ 95.514656] Calling initcall 0xffffffff8075c3e7: init_ext3_fs+0x0/0x63() [ 95.521563] Calling initcall 0xffffffff8075c4fd: journal_init+0x0/0xbd() [ 95.528475] Calling initcall 0xffffffff8075c5ba: init_ext2_fs+0x0/0x63() [ 95.535382] Calling initcall 0xffffffff8075c651: init_cramfs_fs+0x0/0x27() [ 95.542459] Calling initcall 0xffffffff8075c684: init_ramfs_fs+0x0/0xc() [ 95.549355] Calling initcall 0xffffffff8075c6c8: init_fat_fs+0x0/0x48() [ 95.556166] Calling initcall 0xffffffff8075c710: init_msdos_fs+0x0/0xc() [ 95.563063] Calling initcall 0xffffffff8075c71c: init_vfat_fs+0x0/0xc() [ 95.569877] Calling initcall 0xffffffff8075c728: init_iso9660_fs+0x0/0x65() [ 95.577051] Calling initcall 0xffffffff8075c8b5: init_nfs_fs+0x0/0xbe() [ 95.583894] Calling initcall 0xffffffff8075cb27: init_nfsd+0x0/0xa3() [ 95.590534] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 95.597111] Calling initcall 0xffffffff8075cbca: init_nlm+0x0/0x24() [ 95.603666] Calling initcall 0xffffffff8075cbee: init_nls_ascii+0x0/0xc() [ 95.610652] Calling initcall 0xffffffff8075cbfa: init_nls_utf8+0x0/0x1f() [ 95.617639] Calling initcall 0xffffffff8075cc19: init_smb_fs+0x0/0x65() [ 95.624459] Calling initcall 0xffffffff8075cc7e: init_cifs+0x0/0x4e8() [ 95.631239] Calling initcall 0xffffffff8075d166: init_romfs_fs+0x0/0x53() [ 95.640845] Calling initcall 0xffffffff8075d1b9: init_autofs_fs+0x0/0xc() [ 95.647835] Calling initcall 0xffffffff8075d1c5: init_autofs4_fs+0x0/0xc() [ 95.654909] initcall at 0xffffffff8075d1c5: init_autofs4_fs+0x0/0xc(): returned with error code -16 [ 95.664254] Calling initcall 0xffffffff8075d220: fuse_init+0x0/0x10a() [ 95.670975] fuse init (API version 7.7) [ 95.674963] Calling initcall 0xffffffff8075d336: init_udf_fs+0x0/0x53() [ 95.681780] Calling initcall 0xffffffff8075d389: init_jfs_fs+0x0/0x1c0() [ 95.688689] JFS: nTxBlock = 8192, nTxLock = 65536 [ 95.696765] Calling initcall 0xffffffff8075d6ab: init_xfs_fs+0x0/0x115() [ 95.703672] SGI XFS with ACLs, large block/inode numbers, no debug enabled [ 95.710802] SGI XFS Quota Management subsystem [ 95.715364] Calling initcall 0xffffffff8075d7c0: ipc_init+0x0/0x17() [ 95.721923] Calling initcall 0xffffffff8075da19: init_mqueue_fs+0x0/0xcd() [ 95.729013] Calling initcall 0xffffffff8075dc42: key_proc_init+0x0/0x55() [ 95.735998] Calling initcall 0xffffffff8075dc97: crypto_algapi_init+0x0/0xd() [ 95.743332] Calling initcall 0xffffffff8075dcc7: cryptomgr_init+0x0/0xc() [ 95.750318] Calling initcall 0xffffffff8075dcd3: hmac_module_init+0x0/0xc() [ 95.757901] Calling initcall 0xffffffff8075dcdf: init+0x0/0x53() [ 95.764103] Calling initcall 0xffffffff8075dd32: init+0x0/0xc() [ 95.770225] Calling initcall 0xffffffff8075dd3e: init+0x0/0xc() [ 95.776347] Calling initcall 0xffffffff8075dd4a: init+0x0/0xc() [ 95.782470] Calling initcall 0xffffffff8075dd56: init+0x0/0x35() [ 95.788680] Calling initcall 0xffffffff8075dd8b: aes_init+0x0/0x313() [ 95.795338] Calling initcall 0xffffffff8075e09e: init+0x0/0xc() [ 95.801459] Calling initcall 0xffffffff8075e248: noop_init+0x0/0xc() [ 95.808006] io scheduler noop registered [ 95.812097] Calling initcall 0xffffffff8075e254: as_init+0x0/0xc() [ 95.818478] io scheduler anticipatory registered (default) [ 95.824159] Calling initcall 0xffffffff8075e260: deadline_init+0x0/0xc() [ 95.831051] io scheduler deadline registered [ 95.835480] Calling initcall 0xffffffff8075e26c: cfq_init+0x0/0xa5() [ 95.842043] io scheduler cfq registered [ 95.846037] Calling initcall 0xffffffff8042d06e: pci_init+0x0/0x2b() [ 95.854461] Calling initcall 0xffffffff8075ec22: pci_sysfs_init+0x0/0x34() [ 95.861585] Calling initcall 0xffffffff8075ec56: pci_proc_init+0x0/0x68() [ 95.868584] Calling initcall 0xffffffff8075ecbe: pcie_portdrv_init+0x0/0x3b() [ 95.876000] assign_interrupt_mode Found MSI capability [ 95.881375] assign_interrupt_mode Found MSI capability [ 95.886778] assign_interrupt_mode Found MSI capability [ 95.892154] assign_interrupt_mode Found MSI capability [ 95.897498] Calling initcall 0xffffffff8075ecf9: aer_service_init+0x0/0xc() [ 95.904679] Calling initcall 0xffffffff8075eea7: fb_console_init+0x0/0x11a() [ 95.911954] Calling initcall 0xffffffff80444ad6: nvidiafb_init+0x0/0x2be() [ 95.919025] nvidiafb_init: call fb_get_options [ 95.923586] nvidiafb_init: call nvidiafb_setup options=nomtrr [ 95.929441] nvidiafb_setup START [ 95.932784] nvidiafb_setup END [ 95.935958] nvidiafb_init: call pci_register_driver [ 95.940971] nvidiafb_probe START [ 95.944323] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 95.951984] nvidiafb: Device ID: 10de0391 [ 95.970820] nvidiafb: CRTC0 analog found [ 95.990866] nvidiafb: CRTC1 analog not found [ 96.011400] nvidiafb: EDID found from BUS1 [ 96.130228] nvidiafb: EDID found from BUS2 [ 96.134442] nvidiafb: CRTC 0 appears to have a CRT attached [ 96.140122] nvidiafb: Using CRT on CRTC 0 [ 96.144248] nvidiafb: monspecs [ 96.144248] refresh=60 [ 96.144249] xres=1280 [ 96.144250] yres=1024 [ 96.144250] pixclock=9259 [ 96.144251] left_margin=248 [ 96.144251] right_margin=48 [ 96.144252] upper_margin=38 [ 96.144253] lower_margin=1 [ 96.144253] hysnc_len=112 [ 96.144254] vsync_len=3 [ 96.144255] sync=3 [ 96.144255] vmode=0 [ 96.144256] flag=0x11 [ 96.182206] nvidia_set_fbinfo START [ 96.185817] nvidia_set_fbinfo END [ 96.189248] nvidiafb_check_var START [ 96.192939] nvidiafb_check_var END [ 96.196459] nvidia_save_vga START [ 96.199972] nvidia_save_vga END nvGetClocks: arch=0x40 chipset=0x10de0391 p4020=0xa4301000 p4024=0x00005303 M=3 N=83 MB=1 NB=1 P=0 [ 96.216461] nvidiafb_set_par START [ 96.224967] nvidia_write_regs START [ 96.225069] nvidia_write_regs END [ 96.225074] nvidiafb_set_par END [ 96.225087] nvidiafb_setcolreg START [ 96.225088] nvidiafb_setcolreg END [ 96.225089] nvidiafb_setcolreg START [ 96.225090] nvidiafb_setcolreg END [ 96.225091] nvidiafb_setcolreg START [ 96.225092] nvidiafb_setcolreg END [ 96.225093] nvidiafb_setcolreg START [ 96.225094] nvidiafb_setcolreg END [ 96.225095] nvidiafb_setcolreg START [ 96.225096] nvidiafb_setcolreg END [ 96.225097] nvidiafb_setcolreg START [ 96.225098] nvidiafb_setcolreg END [ 96.225099] nvidiafb_setcolreg START [ 96.225100] nvidiafb_setcolreg END [ 96.225101] nvidiafb_setcolreg START [ 96.225102] nvidiafb_setcolreg END [ 96.225103] nvidiafb_setcolreg START [ 96.225104] nvidiafb_setcolreg END [ 96.225105] nvidiafb_setcolreg START [ 96.225106] nvidiafb_setcolreg END [ 96.225107] nvidiafb_setcolreg START [ 96.225108] nvidiafb_setcolreg END [ 96.225109] nvidiafb_setcolreg START [ 96.225110] nvidiafb_setcolreg END [ 96.225111] nvidiafb_setcolreg START [ 96.225112] nvidiafb_setcolreg END [ 96.225113] nvidiafb_setcolreg START [ 96.225114] nvidiafb_setcolreg END [ 96.225115] nvidiafb_setcolreg START [ 96.225116] nvidiafb_setcolreg END [ 96.225117] nvidiafb_setcolreg START [ 96.225118] nvidiafb_setcolreg END [ 96.225120] nvidiafb_setcolreg START [ 96.225121] nvidiafb_setcolreg END [ 96.225122] nvidiafb_setcolreg START [ 96.225123] nvidiafb_setcolreg END [ 96.225124] nvidiafb_setcolreg START [ 96.225125] nvidiafb_setcolreg END [ 96.225126] nvidiafb_setcolreg START [ 96.225127] nvidiafb_setcolreg END [ 96.225128] nvidiafb_setcolreg START [ 96.225129] nvidiafb_setcolreg END [ 96.225130] nvidiafb_setcolreg START [ 96.225131] nvidiafb_setcolreg END [ 96.225132] nvidiafb_setcolreg START [ 96.225133] nvidiafb_setcolreg END [ 96.225134] nvidiafb_setcolreg START [ 96.225135] nvidiafb_setcolreg END [ 96.225136] nvidiafb_setcolreg START [ 96.225137] nvidiafb_setcolreg END [ 96.225138] nvidiafb_setcolreg START [ 96.225139] nvidiafb_setcolreg END [ 96.225140] nvidiafb_setcolreg START [ 96.225141] nvidiafb_setcolreg END [ 96.225142] nvidiafb_setcolreg START [ 96.225143] nvidiafb_setcolreg END [ 96.225144] nvidiafb_setcolreg START [ 96.225145] nvidiafb_setcolreg END [ 96.225146] nvidiafb_setcolreg START [ 96.225147] nvidiafb_setcolreg END [ 96.225148] nvidiafb_setcolreg START [ 96.225149] nvidiafb_setcolreg END [ 96.225150] nvidiafb_setcolreg START [ 96.225151] nvidiafb_setcolreg END [ 96.228143] Console: switching to colour frame buffer device 160x64 [ 96.228148] nvidiafb_setcolreg START [ 96.228149] nvidiafb_setcolreg END [ 96.228150] nvidiafb_setcolreg START [ 96.228151] nvidiafb_setcolreg END [ 96.228152] nvidiafb_setcolreg START [ 96.228153] nvidiafb_setcolreg END [ 96.228154] nvidiafb_setcolreg START [ 96.228155] nvidiafb_setcolreg END [ 96.228156] nvidiafb_setcolreg START [ 96.228157] nvidiafb_setcolreg END [ 96.228158] nvidiafb_setcolreg START [ 96.228159] nvidiafb_setcolreg END [ 96.228160] nvidiafb_setcolreg START [ 96.228161] nvidiafb_setcolreg END [ 96.228162] nvidiafb_setcolreg START [ 96.228163] nvidiafb_setcolreg END [ 96.228164] nvidiafb_setcolreg START [ 96.228165] nvidiafb_setcolreg END [ 96.228166] nvidiafb_setcolreg START [ 96.228167] nvidiafb_setcolreg END [ 96.228168] nvidiafb_setcolreg START [ 96.228169] nvidiafb_setcolreg END [ 96.228170] nvidiafb_setcolreg START [ 96.228171] nvidiafb_setcolreg END [ 96.228172] nvidiafb_setcolreg START [ 96.228173] nvidiafb_setcolreg END [ 96.228174] nvidiafb_setcolreg START [ 96.228175] nvidiafb_setcolreg END [ 96.228176] nvidiafb_setcolreg START [ 96.228177] nvidiafb_setcolreg END [ 96.228178] nvidiafb_setcolreg START [ 96.228179] nvidiafb_setcolreg END [ 96.231166] nvidiafb_setcolreg START [ 96.231167] nvidiafb_setcolreg END [ 96.231168] nvidiafb_setcolreg START [ 96.231169] nvidiafb_setcolreg END [ 96.231170] nvidiafb_setcolreg START [ 96.231171] nvidiafb_setcolreg END [ 96.231172] nvidiafb_setcolreg START [ 96.231173] nvidiafb_setcolreg END [ 96.231174] nvidiafb_setcolreg START [ 96.231175] nvidiafb_setcolreg END [ 96.231176] nvidiafb_setcolreg START [ 96.231177] nvidiafb_setcolreg END [ 96.231178] nvidiafb_setcolreg START [ 96.231179] nvidiafb_setcolreg END [ 96.231180] nvidiafb_setcolreg START [ 96.231181] nvidiafb_setcolreg END [ 96.231182] nvidiafb_setcolreg START [ 96.231183] nvidiafb_setcolreg END [ 96.231184] nvidiafb_setcolreg START [ 96.231185] nvidiafb_setcolreg END [ 96.231186] nvidiafb_setcolreg START [ 96.231187] nvidiafb_setcolreg END [ 96.231188] nvidiafb_setcolreg START [ 96.231189] nvidiafb_setcolreg END [ 96.231190] nvidiafb_setcolreg START [ 96.231191] nvidiafb_setcolreg END [ 96.231192] nvidiafb_setcolreg START [ 96.231193] nvidiafb_setcolreg END [ 96.231194] nvidiafb_setcolreg START [ 96.231195] nvidiafb_setcolreg END [ 96.231196] nvidiafb_setcolreg START [ 96.231198] nvidiafb_setcolreg END [ 96.741910] nvidiafb: PCI nVidia NV39 framebuffer (64MB @ 0xD0000000) [ 96.741911] FbMapSize=67108864 [ 96.741912] Architecture=64 [ 96.741912] FbUsableSize=66535424 [ 96.741913] ScratchBufferSize=16384 [ 96.741914] ScratchBufferStart=0x3F70000 [ 96.741914] CursorStart=0x3F7C000 [ 96.741915] screen_base=0xffffc20001680000 [ 96.741916] screen_size=66535424 [ 96.741917] FbStart=0xffffc20001680000 [ 96.784822] nvidiafb_probe END [ 96.788395] nvidiafb_init: ret pci_register_driver result=0 [ 96.794492] Calling initcall 0xffffffff8075fda8: acpi_ac_init+0x0/0x45() [ 96.801800] Calling initcall 0xffffffff8075fded: acpi_battery_init+0x0/0x45() [ 96.809543] Calling initcall 0xffffffff8075fe32: acpi_button_init+0x0/0x60() [ 96.817210] ACPI: Power Button (FF) [PWRF] [ 96.821895] ACPI: Power Button (CM) [PWRB] [ 96.826570] Calling initcall 0xffffffff8076045c: acpi_fan_init+0x0/0x60() [ 96.834000] Calling initcall 0xffffffff80760502: acpi_video_init+0x0/0x60() [ 96.841664] Calling initcall 0xffffffff80760562: hotkey_init+0x0/0x21d() [ 96.849029] Using specific hotkey driver [ 96.853575] Calling initcall 0xffffffff8076080f: irqrouter_init_sysfs+0x0/0x38() [ 96.861690] Calling initcall 0xffffffff807609c4: acpi_processor_init+0x0/0x80() [ 96.869837] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810002f7fab0), AE_BAD_HEADER [ 96.881958] ACPI: Processor [CPU1] (supports 8 throttling states) [ 96.888870] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810002f7f9b0), AE_BAD_HEADER [ 96.901047] ACPI: Processor [CPU2] (supports 8 throttling states) [ 96.907991] ACPI: Getting cpuindex for acpiid 0x3 [ 96.913511] ACPI: Getting cpuindex for acpiid 0x4 [ 96.919029] Calling initcall 0xffffffff80760a44: acpi_container_init+0x0/0x43() [ 96.928635] Calling initcall 0xffffffff80760a87: acpi_thermal_init+0x0/0x60() [ 96.936678] Calling initcall 0xffffffff80761488: rand_initialize+0x0/0x2c() [ 96.944551] Calling initcall 0xffffffff807614b4: tty_init+0x0/0x1cd() [ 96.950171] Calling initcall 0xffffffff807616d9: pty_init+0x0/0x427() [ 96.962461] Calling initcall 0xffffffff8076209b: lp_init_module+0x0/0x25e() [ 96.970440] lp: driver loaded but no devices found [ 96.976152] Calling initcall 0xffffffff8076241b: rtc_init+0x0/0x1a6() [ 96.983642] Real Time Clock Driver v1.12ac [ 96.988668] Calling initcall 0xffffffff807625c1: hpet_init+0x0/0x62() [ 96.996133] Calling initcall 0xffffffff80762623: nvram_init+0x0/0x80() [ 97.003680] Non-volatile memory driver v1.2 [ 97.008832] Calling initcall 0xffffffff807626a3: ppdev_init+0x0/0xa9() [ 97.016422] ppdev: user-space parallel port driver [ 97.022231] Calling initcall 0xffffffff8076274c: agp_init+0x0/0x26() [ 97.029665] Linux agpgart interface v0.101 (c) Dave Jones [ 97.036107] Calling initcall 0xffffffff8076286e: agp_intel_init+0x0/0x1d() [ 97.044131] Calling initcall 0xffffffff8076288b: drm_core_init+0x0/0x146() [ 97.052142] [drm] Initialized drm 1.0.1 20051102 [ 97.057855] Calling initcall 0xffffffff807629d1: hangcheck_init+0x0/0x81() [ 97.065896] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 97.075988] Hangcheck: Using monotonic_clock(). [ 97.081691] Calling initcall 0xffffffff80762b06: cn_proc_init+0x0/0x33() [ 97.089631] Calling initcall 0xffffffff80762e50: serial8250_init+0x0/0x137() [ 97.097924] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 97.106980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 97.114410] Calling initcall 0xffffffff8076305a: serial8250_pnp_init+0x0/0xc() [ 97.123150] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 97.130041] Calling initcall 0xffffffff80763066: serial8250_pci_init+0x0/0xe() [ 97.138646] Calling initcall 0xffffffff80763568: parport_default_proc_register+0x0/0x1d() [ 97.148202] Calling initcall 0xffffffff8076386c: parport_pc_init+0x0/0x17f() [ 97.156758] Calling initcall 0xffffffff80763b97: topology_sysfs_init+0x0/0x3c() [ 97.165478] Calling initcall 0xffffffff80763c09: rd_init+0x0/0x193() [ 97.173591] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 97.182452] Calling initcall 0xffffffff80763db6: loop_init+0x0/0x2c5() [ 97.190603] loop: loaded (max 8 devices) [ 97.195927] Calling initcall 0xffffffff8076407b: pkt_init+0x0/0xe9() [ 97.203770] Calling initcall 0xffffffff80764164: init_cryptoloop+0x0/0x25() [ 97.212196] Calling initcall 0xffffffff80764189: sky2_init_module+0x0/0xe() [ 97.220667] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 97.230522] sky2 v1.9 addr 0xfa9fc000 irq 19 Yukon-EC (0xb6) rev 2 [ 97.238338] sky2 eth0: addr 00:17:31:e1:ce:a3 [ 97.244372] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 97.253980] sky2 v1.9 addr 0xfa8fc000 irq 16 Yukon-EC (0xb6) rev 2 [ 97.261847] sky2 eth1: addr 00:17:31:e1:cd:12 [ 97.267707] Calling initcall 0xffffffff807641dd: net_olddevs_init+0x0/0xac() [ 97.276369] Calling initcall 0xffffffff80764313: dummy_init_module+0x0/0xb8() [ 97.285092] Calling initcall 0xffffffff804bb001: init_netconsole+0x0/0x5e() [ 97.293603] netconsole: not configured, aborting [ 97.299728] Calling initcall 0xffffffff807643cb: piix_ide_init+0x0/0xc1() [ 97.308086] Calling initcall 0xffffffff804bba23: siimage_ide_init+0x0/0xe() [ 97.316620] Calling initcall 0xffffffff804bcffe: generic_ide_init+0x0/0xe() [ 97.325142] Calling initcall 0xffffffff807644f0: ide_init+0x0/0x87() [ 97.333064] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 97.340942] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 97.350500] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 97.357435] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 97.366414] ICH7: chipset revision 1 [ 97.371534] ICH7: not 100% native mode: will probe irqs later [ 97.378825] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [ 97.387630] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio [ 98.132307] hda: TSSTcorpCD/DVDW SH-S162L, ATAPI CD/DVD-ROM drive [ 98.812633] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 99.387438] Calling initcall 0xffffffff80764d4c: idedisk_init+0x0/0xc() [ 99.395613] Calling initcall 0xffffffff80764d58: ide_cdrom_init+0x0/0xc() [ 99.409809] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 99.419089] Uniform CD-ROM driver Revision: 3.20 [ 99.427939] Calling initcall 0xffffffff80764fce: raid_init+0x0/0xc() [ 99.435970] Calling initcall 0xffffffff80764fda: init_this_scsi_driver+0x0/0xe1() [ 99.445073] Calling initcall 0xffffffff807650bb: init_idescsi_module+0x0/0xc() [ 99.453912] Calling initcall 0xffffffff807650c7: init_sd+0x0/0x106() [ 99.461884] Calling initcall 0xffffffff807651cd: init_sg+0x0/0x15e() [ 99.469831] Calling initcall 0xffffffff8076532b: ata_init+0x0/0x78() [ 99.477792] Calling initcall 0xffffffff807653a3: ahci_init+0x0/0xe() [ 99.485750] Calling initcall 0xffffffff807653b1: piix_init+0x0/0x25() [ 99.493780] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 99.656040] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 99.665016] ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 23 [ 99.673694] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 23 [ 99.682353] scsi0 : ata_piix [ 99.846190] ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) [ 99.855413] ata1.00: ata1: dev 0 multi count 16 [ 99.862776] ata1.00: configured for UDMA/133 [ 99.868604] scsi1 : ata_piix [ 100.535417] ata2.00: ATA-6, max UDMA/133, 640 sectors: LBA [ 100.542498] ata2.00: ata2: dev 0 multi count 1 [ 100.548451] ata2.00: Drive reports diagnostics failure. This may indicate a drive [ 100.557467] ata2.00: fault or invalid emulation. Contact drive vendor for information. [ 100.567271] ata2.00: configured for UDMA/133 [ 100.573249] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 100.582914] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 100.591144] sda: Write Protect is off [ 100.596344] SCSI device sda: drive cache: write back [ 100.602853] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 100.611080] sda: Write Protect is off [ 100.616285] SCSI device sda: drive cache: write back [ 100.622789] sda: sda1 sda2 [ 100.656423] sd 0:0:0:0: Attached scsi disk sda [ 100.662463] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 100.669336] scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5 [ 100.679018] SCSI device sdb: 640 512-byte hdwr sectors (0 MB) [ 100.686332] sdb: Write Protect is off [ 100.691576] SCSI device sdb: drive cache: write through [ 100.698380] SCSI device sdb: 640 512-byte hdwr sectors (0 MB) [ 100.705662] sdb: Write Protect is off [ 100.710866] SCSI device sdb: drive cache: write through [ 100.717610] sdb: unknown partition table [ 100.723789] sd 1:0:0:0: Attached scsi disk sdb [ 100.729791] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 100.736612] Calling initcall 0xffffffff807653d6: pdc_ata_init+0x0/0xe() [ 100.744819] Calling initcall 0xffffffff807653e4: jmicron_init+0x0/0xe() [ 100.753011] Calling initcall 0xffffffff807653f2: mpiix_init+0x0/0xe() [ 100.761016] Calling initcall 0xffffffff80765400: ata_generic_init+0x0/0xe() [ 100.769542] Calling initcall 0xffffffff8076540e: cdrom_init+0x0/0xd() [ 100.777503] Calling initcall 0xffffffff8076564d: ehci_hcd_init+0x0/0xe() [ 100.785763] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 100.795351] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 100.802220] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 100.811161] ehci_hcd 0000:00:1d.7: debug port 1 [ 100.817195] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00 [ 100.828205] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 100.837243] usb usb1: configuration #1 chosen from 1 choice [ 100.844302] hub 1-0:1.0: USB hub found [ 100.849512] hub 1-0:1.0: 8 ports detected [ 100.959602] Calling initcall 0xffffffff8076565b: ohci_hcd_pci_init+0x0/0x38() [ 100.968275] Calling initcall 0xffffffff80765693: uhci_hcd_init+0x0/0x79() [ 100.976568] USB Universal Host Controller Interface driver v3.0 [ 100.983955] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 100.992831] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 100.999530] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 101.008387] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 [ 101.015655] usb usb2: configuration #1 chosen from 1 choice [ 101.022705] hub 2-0:1.0: USB hub found [ 101.027904] hub 2-0:1.0: 2 ports detected [ 101.135740] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 101.144644] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 101.151381] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 101.160299] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 [ 101.167889] usb usb3: configuration #1 chosen from 1 choice [ 101.174998] hub 3-0:1.0: USB hub found [ 101.180245] hub 3-0:1.0: 2 ports detected [ 101.288050] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 101.296972] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 101.303726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 101.312639] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880 [ 101.319949] usb usb4: configuration #1 chosen from 1 choice [ 101.327034] hub 4-0:1.0: USB hub found [ 101.332276] hub 4-0:1.0: 2 ports detected [ 101.380205] usb 1-7: new high speed USB device using ehci_hcd and address 3 [ 101.440682] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 101.449717] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 101.456469] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 101.465392] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00 [ 101.472722] usb usb5: configuration #1 chosen from 1 choice [ 101.479792] hub 5-0:1.0: USB hub found [ 101.485009] hub 5-0:1.0: 2 ports detected [ 101.522162] usb 1-7: configuration #1 chosen from 1 choice [ 101.529355] hub 1-7:1.0: USB hub found [ 101.534803] hub 1-7:1.0: 4 ports detected [ 101.593313] Calling initcall 0xffffffff8076570c: hid_init+0x0/0x40() [ 101.882460] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 102.068358] usb 2-2: configuration #1 chosen from 1 choice [ 102.414242] usb 1-7.3: new high speed USB device using ehci_hcd and address 4 [ 102.522216] usb 1-7.3: configuration #1 chosen from 1 choice [ 102.531236] usbcore: registered new interface driver hiddev [ 102.552310] input: Logitech USB-PS/2 Optical Mouse as /class/input/input0 [ 102.560558] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2 [ 102.570692] usbcore: registered new interface driver usbhid [ 102.577772] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 102.585441] Calling initcall 0xffffffff80765817: i8042_init+0x0/0x305() [ 102.593654] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 102.601335] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 102.611705] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 102.618165] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 102.624708] Calling initcall 0xffffffff80765b1c: serport_init+0x0/0x2a() [ 102.632970] Calling initcall 0xffffffff80765b46: ct82c710_init+0x0/0x133() [ 102.641398] Calling initcall 0xffffffff80765c79: pcips2_init+0x0/0xe() [ 102.649508] Calling initcall 0xffffffff80765c87: serio_raw_init+0x0/0x16() [ 102.657932] Calling initcall 0xffffffff80765db3: mousedev_init+0x0/0xe9() [ 102.666315] mice: PS/2 mouse device common for all mice [ 102.673013] Calling initcall 0xffffffff80765e9c: evdev_init+0x0/0xc() [ 102.681006] Calling initcall 0xffffffff80765ea8: atkbd_init+0x0/0x16() [ 102.689050] Calling initcall 0xffffffff80765ebe: xtkbd_init+0x0/0x16() [ 102.697087] Calling initcall 0xffffffff80765ed4: psmouse_init+0x0/0x46() [ 102.705320] Calling initcall 0xffffffff807661d5: cpufreq_stats_init+0x0/0x95() [ 102.714048] Calling initcall 0xffffffff80766276: cpufreq_gov_powersave_init+0x0/0xc()<6>input: AT Translated Set 2 keyboard as /class/input/input1 [ 102.728695] [ 102.731690] Calling initcall 0xffffffff807662a1: cpufreq_gov_dbs_init+0x0/0xc() [ 102.740546] Calling initcall 0xffffffff807662ad: cpufreq_gov_dbs_init+0x0/0xc() [ 102.749401] Calling initcall 0xffffffff8076688f: ioat_init_module+0x0/0xe() [ 102.757917] Calling initcall 0xffffffff80767b76: oprofile_init+0x0/0x48() [ 102.766243] oprofile: using NMI interrupt. [ 102.771816] Calling initcall 0xffffffff8076836d: flow_cache_init+0x0/0x18b() [ 102.780382] Calling initcall 0xffffffff8076967a: init_syncookies+0x0/0x19() [ 102.788872] Calling initcall 0xffffffff80769693: xfrm4_beet_init+0x0/0x11() [ 102.797328] Calling initcall 0xffffffff807696a4: xfrm4_transport_init+0x0/0x11() [ 102.806202] Calling initcall 0xffffffff807696b5: xfrm4_tunnel_init+0x0/0x11() [ 102.814829] Calling initcall 0xffffffff807696c6: inet_diag_init+0x0/0x60() [ 102.823178] Calling initcall 0xffffffff80769726: tcp_diag_init+0x0/0xc() [ 102.831341] Calling initcall 0xffffffff80769732: cubictcp_register+0x0/0x80() [ 102.839929] TCP cubic registered [ 102.844563] Calling initcall 0xffffffff80769997: af_unix_init+0x0/0x66() [ 102.852740] NET: Registered protocol family 1 [ 102.858524] Calling initcall 0xffffffff807699fd: packet_init+0x0/0x53() [ 102.866620] NET: Registered protocol family 17 [ 102.872469] Calling initcall 0xffffffff80769a50: ipsec_pfkey_init+0x0/0x8b() [ 102.880970] NET: Registered protocol family 15 [ 102.886823] Calling initcall 0xffffffff80769adb: init_sunrpc+0x0/0x36() [ 102.894920] Calling initcall 0xffffffff80769b11: init_rpcsec_gss+0x0/0x2e() [ 102.903345] Calling initcall 0xffffffff80769b3f: init_kerberos_module+0x0/0x25() [ 102.912180] Calling initcall 0xffffffff80769b64: sctp_init+0x0/0x652() [ 102.947082] SCTP: Hash tables configured (established 65536 bind 65536) [ 102.955129] Calling initcall 0xffffffff80752501: init_lapic_nmi_sysfs+0x0/0x38() [ 102.964022] Calling initcall 0xffffffff80754620: centrino_init+0x0/0xbe() [ 102.972271] Calling initcall 0xffffffff807546de: acpi_cpufreq_init+0x0/0xdc() [ 102.981158] Calling initcall 0xffffffff8075896a: clocksource_done_booting+0x0/0xd() [ 102.990506] Calling initcall 0xffffffff80462e08: acpi_poweroff_init+0x0/0x59() [ 102.999483] Calling initcall 0xffffffff80761479: seqgen_init+0x0/0xf() [ 103.007450] Calling initcall 0xffffffff807630ec: early_uart_console_switch+0x0/0x7c() [ 103.016706] Calling initcall 0xffffffff80765f1a: rtc_hctosys+0x0/0x175() [ 103.024816] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 103.032447] Calling initcall 0xffffffff80541eed: net_random_reseed+0x0/0x64() [ 103.041018] Calling initcall 0xffffffff80769374: tcp_congestion_default+0x0/0xc() [ 103.072370] kjournald starting. Commit interval 5 seconds [ 103.079257] EXT3-fs: mounted filesystem with ordered data mode. [ 103.086585] VFS: Mounted root (ext3 filesystem) readonly. [ 103.093382] Freeing unused kernel memory: 236k freed # # Automatically generated make config: don't edit # Linux kernel version: 2.6.19-rc2 # Sat Oct 14 11:07:51 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="-w8" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Block layer # CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set # CONFIG_MK8 is not set CONFIG_MPSC=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_HT=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_NR_CPUS=4 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y # CONFIG_HPET_EMULATE_RTC is not set CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_REORDER is not set CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_HOTKEY=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # # CONFIG_X86_POWERNOW_K8 is not set CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y CONFIG_X86_ACPI_CPUFREQ=y # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCI_MSI=y # CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set CONFIG_XFRM_SUB_POLICY=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set CONFIG_SCSI_EATA=y CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set CONFIG_SATA_PROMISE=y # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_JMICRON=y # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_MPIIX=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_XTKBD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_CT82C710=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_PCIPS2=y CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=y # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # CONFIG_I2C=y # CONFIG_I2C_CHARDEV is not set # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Misc devices # # CONFIG_IBM_ASM is not set # CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_FIRMWARE_EDID=y CONFIG_FB=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # # Logo configuration # # CONFIG_LOGO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # # RTC drivers # # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support # CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y # # DMA Devices # CONFIG_INTEL_IOATDMA=y # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set CONFIG_ACORN_PARTITION_ICS=y # CONFIG_ACORN_PARTITION_ADFS is not set # CONFIG_ACORN_PARTITION_POWERTEC is not set CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Distributed Lock Manager # # CONFIG_DLM is not set # # Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set # CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_CAST5=y # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # # Library routines # CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642