From: Franck Bui-Huu <vagabon.xyz@gmail.com>
To: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: vagabon.xyz@gmail.com, ralf@linux-mips.org, linux-mips@linux-mips.org
Subject: Re: [PATCH 6/7] setup.c: clean up initrd related code
Date: Mon, 16 Oct 2006 10:48:37 +0200 [thread overview]
Message-ID: <45334765.6000805@innova-card.com> (raw)
In-Reply-To: <20061016.171046.55511403.nemoto@toshiba-tops.co.jp>
Atsushi Nemoto wrote:
> On Mon, 16 Oct 2006 10:03:13 +0200, Franck Bui-Huu <vagabon.xyz@gmail.com> wrote:
>>> end = (unsigned long)&_end;
>>> tmp = PAGE_ALIGN(end) - sizeof(u32) * 2;
>>> if (tmp < end)
>>> tmp += PAGE_SIZE;
>>>
>> Any idea on what is this code for ?
>> It seems that a minimum gap is needed betweend the end of kernel
>> code and initrd but I don't see why...
>
> Perhaps because current tools put initrd image at that place.
>
> For example:
>
> arch/mips/boot/addinitrd.c:92:
> loadaddr = ((SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size)
> + MIPS_PAGE_SIZE-1) & ~MIPS_PAGE_MASK) - 8;
> if (loadaddr < (SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size)))
> loadaddr += MIPS_PAGE_SIZE;
> initrd_header[0] = SWAB(0x494E5244);
> initrd_header[1] = SWAB(st.st_size);
>
thanks but it doesn't explain anything either...Anyways what about this
patch on top of the previous one ?
-- >8 --
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 811a8fd..0e61e18 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -177,15 +177,13 @@ static unsigned long __init init_initrd(
if (initrd_end > initrd_start)
goto sanitize;
- end = (unsigned long)&_end;
- tmp = PAGE_ALIGN(end) - sizeof(u32) * 2;
- if (tmp < end)
- tmp += PAGE_SIZE;
-
+ /*
+ * FIXME: a good comment would be nice here...
+ */
+ initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + sizeof(u32) * 2 + 1));
initrd_start = 0;
initrd_end = 0;
end = 0;
- initrd_header = (u32 *)tmp;
if (initrd_header[0] == 0x494E5244) {
initrd_start = (unsigned long)&initrd_header[2];
initrd_end = initrd_start + initrd_header[1];
next prev parent reply other threads:[~2006-10-16 8:48 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-13 12:38 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #2] Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 1/7] page.h: remove __pa() usages Franck Bui-Huu
2006-10-13 16:27 ` Atsushi Nemoto
2006-10-14 9:22 ` Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 2/7] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernels Franck Bui-Huu
2006-10-13 16:27 ` Atsushi Nemoto
2006-10-14 8:39 ` Franck Bui-Huu
2006-10-19 4:01 ` Atsushi Nemoto
2006-10-19 6:20 ` Franck Bui-Huu
2006-10-19 6:41 ` Yoichi Yuasa
2006-10-19 7:01 ` Atsushi Nemoto
2006-10-19 7:23 ` Yoichi Yuasa
2006-10-19 7:43 ` Franck Bui-Huu
2006-10-19 7:59 ` Atsushi Nemoto
2006-10-13 12:39 ` [PATCH 3/7] setup.c: get ride of CPHYSADDR() Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 4/7] Introduce __pa_symbol() Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 5/7] setup.c: use __pa_symbol() where needed Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 6/7] setup.c: clean up initrd related code Franck Bui-Huu
2006-10-16 8:03 ` Franck Bui-Huu
2006-10-16 8:10 ` Atsushi Nemoto
2006-10-16 8:48 ` Franck Bui-Huu [this message]
2006-10-16 9:07 ` Atsushi Nemoto
2006-10-16 9:54 ` Thiemo Seufer
2006-10-16 10:19 ` Atsushi Nemoto
2006-10-16 14:42 ` Franck Bui-Huu
2006-10-16 14:51 ` Franck Bui-Huu
2006-10-16 9:09 ` Thiemo Seufer
2006-10-16 14:23 ` Franck Bui-Huu
2006-10-16 14:49 ` Franck Bui-Huu
2006-10-19 4:13 ` Atsushi Nemoto
2006-10-19 6:37 ` Franck Bui-Huu
2006-10-19 6:51 ` Atsushi Nemoto
2006-10-19 7:29 ` Franck Bui-Huu
2006-10-19 7:51 ` Atsushi Nemoto
2006-10-19 8:30 ` Franck Bui-Huu
2006-10-19 8:39 ` Franck Bui-Huu
2006-10-19 9:15 ` Atsushi Nemoto
2006-10-19 9:54 ` Franck Bui-Huu
2006-10-19 10:30 ` Atsushi Nemoto
2006-10-19 10:51 ` Franck Bui-Huu
2006-10-19 11:00 ` Atsushi Nemoto
2006-10-19 11:12 ` Franck Bui-Huu
2006-10-13 12:39 ` [PATCH 7/7] Make free_init_pages() arguments to be physical addresses Franck Bui-Huu
2006-10-13 13:31 ` Franck Bui-Huu
-- strict thread matches above, loose matches on Subject: below --
2006-10-16 16:12 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #3] Franck Bui-Huu
2006-10-16 16:12 ` [PATCH 6/7] setup.c: clean up initrd related code Franck Bui-Huu
2006-10-19 11:19 [PATCH 0/7] Get ride of CPHYSADDR() in setup.c [take #4] Franck Bui-Huu
2006-10-19 11:20 ` [PATCH 6/7] setup.c: clean up initrd related code Franck Bui-Huu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45334765.6000805@innova-card.com \
--to=vagabon.xyz@gmail.com \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.