Re: [e1000]: flow control on by default - good idea really?

[Auke Kok <auke-jan.h.kok@intel.com>]

jamal wrote:
> On Tue, 2006-17-10 at 14:02 -0700, Auke Kok wrote:
> 
>> For now, we should really report the FC status in e1000 at link up time. Jamal: this 
>> should help you out for now, I'll send something like this upstream later on.
>>
> 
> Thanks - this puts you at par with the tg3 at least.
> 
> 
> On Tue, 2006-17-10 at 14:46 -0700, David Miller wrote: 
>> From: jamal <hadi@cyberus.ca>
>> Date: Tue, 17 Oct 2006 09:05:31 -0400
>>
>>> It sounds to me that ethttool needs to have this semantic fix.
>>> IOW, ethttool doesnt differentiate the two items:
>>> a) advertised parameters.
>>> b) link partner negotiated parameters.
>>>
>>> and instead #a becomes #b after negotiation.
>>>
>>>
>>> methinks this needs fixing. Dave? Jeff?
>> The way I understand it the ethernet autonegotiation mechanisms don't
>> really give you a way to seperate these two things.
>>
>> Either you negotiate the link and flow control settings, or nothing.
> 
> True - but I was thinking more of the state stored in the driver
> either by ethtool or some other part of the driver.
> 
> If i remember correctly, Donald Beckers old mii tool was able to 
> display
> "here's what you have configured the driver for link and flow control and 
> these are what i advertise to link peers"
> and
> "here's what current negotiated link and flow control parameters with 
> link peer"
> 
> That distinction doesnt exist with ethtool. Or i am missing something.

nope, there's not even an ethtool cmd to query for that data AFAICS

Auke