From: Marco Cavallini <wx1@koansoftware.com>
To: linux-kernel@vger.kernel.org
Subject: Problem with 8250 suspend/resume
Date: Fri, 20 Oct 2006 10:20:23 +0200 [thread overview]
Message-ID: <453886C7.1010309@koansoftware.com> (raw)
Hello,
I am testing suspend/resume using ttyS ports,
but I am facing to problems with 8250 based ports.
Linux kernel is 2.6.17-rc4 (but I've noticed no changes in 2.6.18)
Serial ports are 16C2852 but are identified as XR16850.
If I send the board to sleep and I try to wake it with chars from ttyS3
( or ttyS*) the system go in suspend mode ans NEVER wakes up using
serial ports:
# cat /dev/ttyS3 &
# echo standby > /sys/power/state
I tried also putting a function enable_irq_wake(port->irq)
at the end of uart_suspend_port() [file drivers/serial/serial_core.c]
and in that case when I do the suspend command
# echo standby > /sys/power/state
immediately wakes up with no events and no interrupts rised from UART
chip, with no cable connected to any port except console ttyAT0
I have been working on this problem for almost a week without success,
using printk and trying to understand what is going wrong.
If anybody has been experienced with 8250 suspend/resume problems or
knows if there is something bad into the driver, I 'd like a hint to
understand what to do.
Any hint will be greatly appreciated
Thanks
--
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
- Atmel Third Party Consultant
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
www.KoanSoftware.com | www.KaeilOS.com
reply other threads:[~2006-10-20 8:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=453886C7.1010309@koansoftware.com \
--to=wx1@koansoftware.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.