All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Sune Mølgaard" <sune@molgaard.org>
To: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Jiri Slaby <jirislaby@gmail.com>,
	Linux kernel mailing list <linux-kernel@vger.kernel.org>,
	linux-acpi@vger.kernel.org
Subject: Re: speedstep-centrino: ENODEV
Date: Fri, 20 Oct 2006 14:09:04 +0200	[thread overview]
Message-ID: <4538BC60.8000603@molgaard.org> (raw)
In-Reply-To: <EB12A50964762B4D8111D55B764A8454C1A971@scsmsx413.amr.corp.intel.com>

[-- Attachment #1: Type: text/plain, Size: 781 bytes --]

Pallipadi, Venkatesh wrote:
> 
> Hmm... You must have CPU_FREQ_DENUG enabled in CONFIG already. Can you pass cpufreq.debug=3 in boot option and send me the output of dmesg after that.
> 
> Thanks,
> Venki

I am currently on 2.6.17.13 ubuntu version, that includes a lot of 
2.6.18 code.

It seems it tries to load acpi-cpufreq which complains about 
cpu_online_map, bu I also tried explicitly to load speedstep-centrino, 
which resulted in

sune@tommelise:~$ sudo modprobe speedstep-centrino
Password:
FATAL: Error inserting speedstep_centrino 
(/lib/modules/2.6.17.13-ubuntu1-pentium4m-1/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): 
No such device
sune@tommelise:~$

But nothing in dmesg, which is attached.

And it is me who should be and am thanking :-)

/sunem

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 12609 bytes --]

errupt for device 0000:00:1e.3 disabled
[4294668.392000] input: PC Speaker as /class/input/input0
[4294668.392000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.393000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.397000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.403000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.403000] TCP bic registered
[4294668.403000] NET: Registered protocol family 8
[4294668.404000] NET: Registered protocol family 20
[4294668.404000] Using IPI Shortcut mode
[4294668.404000] ACPI: (supports S0 S3 S4 S5)
[4294668.404000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[4294668.404000] Freeing unused kernel memory: 168k freed
[4294668.418000] input: AT Translated Set 2 keyboard as /class/input/input1
[4294668.438000] NET: Registered protocol family 1
[4294668.454000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294668.455000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294668.455000] ACPI: Getting cpuindex for acpiid 0x1
[4294668.464000] ACPI: Thermal Zone [THM] (53 C)
[4294668.796000] libata version 1.20 loaded.
[4294668.797000] ahci 0000:00:1f.2: version 1.2
[4294668.797000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[4294668.797000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[4294668.797000] ahci: probe of 0000:00:1f.2 failed with error -12
[4294668.798000] ata_piix 0000:00:1f.2: version 1.05
[4294668.798000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[4294668.798000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294668.798000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
[4294668.953000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:5b08 84:4003 85:7c69 86:1a08 87:4003 88:203f
[4294668.953000] ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA
[4294668.953000] ata1(0): applying bridge limits
[4294668.956000] ata1: dev 0 configured for UDMA/100
[4294668.956000] scsi0 : ata_piix
[4294668.956000]   Vendor: ATA       Model: TOSHIBA MK4026GA  Rev: PA10
[4294668.957000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[4294668.958000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
[4294669.263000] ata2: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407
[4294669.263000] ata2: dev 0 ATAPI, max UDMA/33
[4294669.417000] ata2: dev 0 configured for UDMA/33
[4294669.417000] scsi1 : ata_piix
[4294669.721000]   Vendor: SONY      Model: DVD+-RW DW-Q58A   Rev: UDS1
[4294669.722000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[4294669.736000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[4294669.736000] sda: Write Protect is off
[4294669.736000] sda: Mode Sense: 00 3a 00 00
[4294669.736000] SCSI device sda: drive cache: write back
[4294669.737000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[4294669.737000] sda: Write Protect is off
[4294669.737000] sda: Mode Sense: 00 3a 00 00
[4294669.737000] SCSI device sda: drive cache: write back
[4294669.737000]  sda: sda1 sda2 sda3
[4294669.797000] sd 0:0:0:0: Attached scsi disk sda
[4294669.989000] usbcore: registered new driver usbfs
[4294669.990000] usbcore: registered new driver hub
[4294669.990000] USB Universal Host Controller Interface driver v3.0
[4294669.991000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
[4294669.991000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294669.991000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294669.991000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294669.991000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80
[4294669.991000] usb usb1: configuration #1 chosen from 1 choice
[4294669.991000] hub 1-0:1.0: USB hub found
[4294669.991000] hub 1-0:1.0: 2 ports detected
[4294670.028000] ieee1394: Initialized config rom entry `ip1394'
[4294670.049000] Attempting manual resume
[4294670.059000] SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
[4294670.060000] XFS mounting filesystem sda3
[4294670.092000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[4294670.092000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294670.092000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294670.092000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294670.092000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[4294670.092000] usb usb2: configuration #1 chosen from 1 choice
[4294670.092000] hub 2-0:1.0: USB hub found
[4294670.092000] hub 2-0:1.0: 2 ports detected
[4294670.158000] Ending clean XFS mount for filesystem: sda3
[4294670.193000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[4294670.193000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294670.193000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294670.193000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294670.193000] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
[4294670.193000] usb usb3: configuration #1 chosen from 1 choice
[4294670.193000] hub 3-0:1.0: USB hub found
[4294670.193000] hub 3-0:1.0: 2 ports detected
[4294670.294000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 16
[4294670.294000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294670.294000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294670.294000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294670.294000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bf20
[4294670.294000] usb usb4: configuration #1 chosen from 1 choice
[4294670.294000] hub 4-0:1.0: USB hub found
[4294670.294000] hub 4-0:1.0: 2 ports detected
[4294670.395000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 18
[4294670.395000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294670.395000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294670.395000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294670.395000] ehci_hcd 0000:00:1d.7: debug port 1
[4294670.396000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294670.396000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[4294670.399000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294670.400000] usb usb5: configuration #1 chosen from 1 choice
[4294670.400000] hub 5-0:1.0: USB hub found
[4294670.400000] hub 5-0:1.0: 8 ports detected
[4294670.501000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19
[4294670.554000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfdfc800-dfdfcfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[4294670.886000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[4294671.047000] usb 4-2: configuration #1 chosen from 1 choice
[4294671.819000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[344fc00032486830]
[4294688.106000] usbcore: registered new driver hiddev
[4294688.127000] input: Logitech USB Receiver as /class/input/input2
[4294688.127000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2
[4294688.127000] usbcore: registered new driver usbhid
[4294688.127000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294688.198000] Linux agpgart interface v0.101 (c) Dave Jones
[4294688.215000] agpgart: Detected an Intel 915GM Chipset.
[4294688.215000] agpgart: Detected 7932K stolen memory.
[4294688.237000] agpgart: AGP aperture is 256M @ 0xc0000000
[4294688.333000] hw_random: cannot enable RNG, aborting
[4294688.346000] Real Time Clock Driver v1.12ac
[4294688.495000] input: PS/2 Mouse as /class/input/input3
[4294688.516000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[4294689.016000] mice: PS/2 mouse device common for all mice
[4294689.672000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 18
[4294689.672000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4294689.820000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[4294689.820000] sdhci: Copyright(c) Pierre Ossman
[4294689.849000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294689.849000]  1:0:0:0: Attached scsi generic sg1 type 5
[4294689.907000] ieee80211_crypt: registered algorithm 'NULL'
[4294689.943000] ieee80211: 802.11 data/management/control stack, 1.1.14
[4294689.943000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294689.971000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[4294689.971000] Uniform CD-ROM driver Revision: 3.20
[4294689.971000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294690.017000] ipw2200: no version for "ieee80211_wx_get_encodeext" found: kernel tainted.
[4294690.019000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8
[4294690.019000] ipw2200: Copyright(c) 2003-2005 Intel Corporation
[4294690.483000] intel8x0_measure_ac97_clock: measured 50465 usecs
[4294690.483000] intel8x0: clocking to 48000
[4294690.483000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 16
[4294690.483000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188]
[4294690.606000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[4294690.606000] Socket status: 30000006
[4294690.606000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[4294690.607000] pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
[4294690.607000] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff
[4294690.611000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[4294690.612000] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 17
[4294690.615000] mmc0: SDHCI at 0xdfdfc700 irq 17 DMA
[4294690.619000] b44.c:v1.00 (Apr 7, 2006)
[4294690.619000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[4294690.624000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:e7:d1:a7
[4294690.625000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294690.625000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294691.170000] lp: driver loaded but no devices found
[4294691.214000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294691.215000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294691.280000] fuse init (API version 7.6)
[4294691.306000] i8k: unable to get SMM BIOS version
[4294691.306000] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[4294691.386000] Adding 1004052k swap on /dev/disk/by-uuid/83fa86c0-5214-4328-8fab-12a59d32ae08.  Priority:-1 extents:1 across:1004052k
[4294691.699000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[4294692.142000] NET: Registered protocol family 17
[4294693.188000] kjournald starting.  Commit interval 5 seconds
[4294693.188000] EXT3 FS on sda1, internal journal
[4294693.188000] EXT3-fs: mounted filesystem with ordered data mode.
[4294694.767000] ACPI: AC Adapter [AC] (on-line)
[4294695.086000] ACPI: Battery Slot [BAT0] (battery present)
[4294695.097000] ACPI: Lid Switch [LID]
[4294695.097000] ACPI: Power Button (CM) [PBTN]
[4294695.097000] ACPI: Sleep Button (CM) [SBTN]
[4294695.185000] ibm_acpi: ec object not found
[4294695.231000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[4294695.232000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[4294695.232000] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[4294695.490000] acpi_cpufreq: Unknown symbol cpu_online_map
[4294702.201000] [drm] Initialized drm 1.0.1 20051102
[4294702.204000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
[4294702.206000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[4294703.841000] NET: Registered protocol family 10
[4294703.842000] lo: Disabled Privacy Extensions
[4294703.842000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294703.842000] IPv6 over IPv4 tunneling driver
[4294709.074000] Bluetooth: Core ver 2.8
[4294709.074000] NET: Registered protocol family 31
[4294709.074000] Bluetooth: HCI device and connection manager initialized
[4294709.074000] Bluetooth: HCI socket layer initialized
[4294709.146000] Bluetooth: L2CAP ver 2.8
[4294709.146000] Bluetooth: L2CAP socket layer initialized
[4294709.161000] Bluetooth: RFCOMM socket layer initialized
[4294709.161000] Bluetooth: RFCOMM TTY layer initialized
[4294709.161000] Bluetooth: RFCOMM ver 1.7
[4294724.009000] eth1: no IPv6 routers present
[4294727.530000] ieee80211_crypt: registered algorithm 'TKIP'

  reply	other threads:[~2006-10-20 12:09 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-20 11:56 speedstep-centrino: ENODEV Pallipadi, Venkatesh
2006-10-20 11:56 ` Pallipadi, Venkatesh
2006-10-20 12:09 ` Sune Mølgaard [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-10-20 12:25 Pallipadi, Venkatesh
2006-10-20 12:25 ` Pallipadi, Venkatesh
2006-10-20 12:30 ` Sune Mølgaard
2006-10-19 18:56 Pallipadi, Venkatesh
2006-10-19 18:56 ` Pallipadi, Venkatesh
2006-10-19 20:30 ` Sune Mølgaard
2006-10-20  7:34 ` Sune Mølgaard
2006-10-19 18:21 Pallipadi, Venkatesh
2006-10-19 18:33 ` Sune Mølgaard
2006-10-19 18:33   ` Sune Mølgaard
2006-10-19 19:34 ` Jiri Slaby
2006-10-19 15:57 Pallipadi, Venkatesh
2006-10-19 15:57 ` Pallipadi, Venkatesh
2006-10-19 16:06 ` Jiri Slaby
2006-10-19 18:19 ` Sune Mølgaard
2006-10-19 14:00 Pallipadi, Venkatesh
2006-10-19 14:00 ` Pallipadi, Venkatesh
2006-10-19 14:17 ` Sune Mølgaard
2006-10-19 14:27   ` Sune Mølgaard
2006-10-19 14:20 ` Jiri Slaby
2006-10-18 19:00 Jiri Slaby

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4538BC60.8000603@molgaard.org \
    --to=sune@molgaard.org \
    --cc=jirislaby@gmail.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=venkatesh.pallipadi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.