From: Udo van den Heuvel <udovdh@xs4all.nl>
To: linux-ide@vger.kernel.org
Subject: sata_via issue for VIA Epia SP8000 in 2.6.18[.1]?
Date: Sun, 22 Oct 2006 14:44:38 +0200 [thread overview]
Message-ID: <453B67B6.9060708@xs4all.nl> (raw)
Hello,
2.6.17.13 works OK on this VIA Epia SP8000.
(remember vaguely about some (PCI?) fixups to get things going)
Now I try to get 2.6.18.1 working. SATA is detected by this kernel but
disk gives timeout while 2.6.17.13 boots fine.
Some blurbs:
Links is up but SStatus 113 SControl 300
qc timeout (cmd 0xec)
failed to IDENTIFY
This results in a kernel panic.
Any ideas?
2.6.17.13 gives stuff like this:
scsi0 : sata_via
ata2: SATA link up 1.5 Gbps (SStatus 113)
ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023
88:40ff
ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_via
Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 1:0:0:0: Attached scsi disk sda
Udo
PS: Sorry for sending this also to linux-kernel
next reply other threads:[~2006-10-22 12:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-22 12:44 Udo van den Heuvel [this message]
2006-10-22 13:16 ` sata_via issue for VIA Epia SP8000 in 2.6.18[.1]? Udo van den Heuvel
-- strict thread matches above, loose matches on Subject: below --
2006-10-22 12:19 Udo van den Heuvel
2006-10-24 0:04 ` Daniel Drake
2006-10-24 14:23 ` Udo van den Heuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=453B67B6.9060708@xs4all.nl \
--to=udovdh@xs4all.nl \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.