From mboxrd@z Thu Jan 1 00:00:00 1970 From: Troy Nelson Subject: [parisc-linux] Floppy Drive problem on 715/75 Date: Thu, 26 Oct 2006 15:12:43 -0400 Message-ID: <454108AB.7060503@scires.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed To: parisc-linux@lists.parisc-linux.org Return-Path: List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org Greetings! When boot I get the following boot message below. In short my sda which is my scsi floppy drive is trying to send up but fails. This happens a couple of times then times out and continues to boot. Once logged into the system I can't mount my floppy. If i trying to mount it, it just hangs until i remove the disk. Any help would be appreciated! Linux version 2.6.17.10-pa6 (root@PALINUX) (gcc version 3.3.5 (Gentoo 3.3.5-r1, pie-8.7.7.1)) #2 Thu Oct 26 13:50:13 EST 2006 FP[0] enabled: Rev 1 Model 9 The 32-bit Kernel has started... Initialized PDC Console for debugging. Determining PDC firmware type: Snake. model 00003160 00000481 00000000 00000000 77bbccf4 ffffffff 00000004 0000000a 0000000a vers 00000013 model 9000/715 Total Memory: 64 MB On node 0 totalpages: 16384 DMA zone: 16384 pages, LIFO batch:3 Built 1 zonelists Kernel command line: root=/dev/sdb4 console=tty0 sti=0 sti_font=VGA8x16 palo_kernel=2/vmlinux PID hash table entries: 512 (order: 9, 2048 bytes) Console: colour dummy device 128x48 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 65536k available Calibrating delay loop... 74.75 BogoMIPS (lpj=373760) Mount-cache hash table entries: 512 NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Stinger Optional Graphics at 0xf4000000 [0] { 10, 0x0, 0x006, 0x00077 } 2. Scorpio Sr. Core BA at 0xf082f000 [2] { 11, 0x0, 0x019, 0x00070 } 3. Scorpio Sr. Core SCSI at 0xf0825000 [2/0/1] { 10, 0x0, 0x019, 0x00071 } 4. Scorpio Sr. Core LAN (802.3) at 0xf0826000 [2/0/2] { 10, 0x0, 0x019, 0x00072 } 5. Scorpio Sr. Core HIL at 0xf0821000 [2/0/3] { 10, 0x0, 0x019, 0x00073 } 6. Scorpio Sr. Core RS-232 at 0xf0823000 [2/0/4] { 10, 0x0, 0x019, 0x00075 } 7. Scorpio Sr. Core RS-232 at 0xf0822000 [2/0/5] { 10, 0x0, 0x019, 0x00075 } 8. Scorpio Sr. Core Centronics at 0xf0824000 [2/0/6] { 10, 0x0, 0x019, 0x00074 } 9. Scorpio Sr. Audio at 0xf1000000 [2/0/8] { 10, 0x0, 0x019, 0x0007b } 10. Scorpio Sr. EISA BA at 0xfc000000 [4] { 11, 0x0, 0x019, 0x00076 } 11. Scorpio Sr.(715/75) at 0xfffbe000 [8] { 0, 0x0, 0x316, 0x00004 } 12. Memory at 0xfffbf000 [9] { 1, 0x0, 0x027, 0x00009 } Enabling regular chassis codes support v0.05 CPU(s): 1 x PA7100 (PCX-T) at 75.000000 MHz Whole cache flush 233043 cycles, flushing 6168576 bytes 686816 cycles Setting cache flush threshold to 1140 (1 CPUs online) Asp version 1 at 0xf082f000 found. LED (ASP-style) display at f0800020 registered Mongoose EISA Adapter found at 0xfc000000 Enumerating EISA bus EISA slot 1: HWP1850 EISA IRQ 10 EISA: Probing bus 0 at 4 EISA: Mainboard HWPC000 detected. EISA: slot 1 : HWP1850 detected. EISA: Detected 1 card. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 2048 bind 1024) TCP reno registered Chassis warnings not supported. unwind_init: start = 0x10502680, end = 0x105416d0, entries = 16133 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 EISA EEPROM at 0x00008400 PDC Stable Storage facility v0.30 Soft power switch support not available. STI GSC/PCI core graphics driver Version 0.9a id 27f12392-40a00499, conforms to spec rev. 8.02 graphics card name: HPA1991AC19 sticon: Initializing STI text console. Console: switching to colour STI console 160x64 Console: switching to colour frame buffer device 160x64 fb0: stifb 1280x1024-8 frame buffer device, HPA1991AC19, id: 27f12392, mmio: 0xf4100000 Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 2:0:4: ttyS0 at MMIO 0xf0823800 (irq = 20) is a 16550A 2:0:5: ttyS1 at MMIO 0xf0822800 (irq = 21) is a 16550A parport_init_chip: enhanced parport-modes not supported. parport0: PC-style at 0xf0824800, irq 22 [PCSPP] RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize loop: loaded (max 8 devices) usbcore: registered new driver ub LASI 82596 driver - Revision: 1.30 Found i82596 at 0xf0826000, IRQ 17 drivers/net/lasi_82596.c: MAC of HP700 LAN read from EEPROM eth0: 82596 at 0xf0826000, 08 00 09 4F 83 68 IRQ 17. orinoco 0.15rc3 (David Gibson , Pavel Roskin , et al) orinoco_cs 0.15rc3 (David Gibson , Pavel Roskin , et al) spectrum_cs 0.15rc3 (Pavel Roskin , David Gibson , et al) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi0: 53c700 rev 0 scsi0 : LASI SCSI 53c700 st: Version 20050830, fixed bufsize 32768, s/g segs 256 SCSI Media Changer driver v0.25 usbmon: debugfs is not available ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Vendor: TEAC Model: FC-1 HF 07 Rev: RV B Type: Direct-Access ANSI SCSI revision: 01 CCS HP SDC: HP SDC at 0xf0821000, IRQ 18 (NMI IRQ 19) HP SDC: New style SDC HP SDC: Revision: 1820-4784 HP SDC: TI SN76494 beeper present HP SDC: OKI MSM-58321 BBRTC present HP SDC: Spunking the self test register to force PUP on next firmware reset. HP SDC MLC: Registering the System Domain Controller's HIL MLC. Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 1036 Type: CD-ROM ANSI SCSI revision: 02 mice: PS/2 mouse device common for all mice hil_kbd: probe of serio0 failed with error -5 hil_kbd: probe of serio1 failed with error -5 hil_kbd: probe of serio2 failed with error -5 hil_kbd: probe of serio3 failed with error -5 hil_kbd: probe of serio4 failed with error -5 hil_kbd: probe of serio5 failed with error -5 hil_kbd: probe of serio6 failed with error -5 hil_kbd: probe of serio7 failed with error -5 hil_kbd: probe of serio8 failed with error -5 hil_kbd: probe of serio9 failed with error -5 hil_kbd: probe of serio10 failed with error -5 hil_kbd: probe of serio11 failed with error -5 hil_kbd: probe of serio12 failed with error -5 hil_kbd: probe of serio13 failed with error -5 hil_kbd: probe of serio14 failed with error -5 hil_kbd: probe of serio15 failed with error -5 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: measuring checksumming speed 8regs : 52.000 MB/sec 8regs_prefetch: 55.600 MB/sec 32regs : 63.600 MB/sec 32regs_prefetch: 67.200 MB/sec raid5: using function: 32regs_prefetch (67.200 MB/sec) raid6: int32x1 14 MB/s raid6: int32x2 17 MB/s raid6: int32x4 20 MB/s raid6: int32x8 17 MB/s raid6: using algorithm int32x4 (20 MB/s) md: raid6 personality registered for level 6 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC). Vendor: SEAGATE Model: ST32151N Rev: HP02 Type: Direct-Access ANSI SCSI revision: 02 harmony: cannot allocate graveyard buffer! harmony: probe of 2:0:8 failed with error -12 ALSA device list: No soundcards found. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 scsi: waiting for bus probes to complete ... sda: Spinning up disk................................................................<6>HIL KEYB: HIL keyboard found (did = 0xdf, lang = english.us) input: HIL keyboard as /class/input/input0 input: HIL keyboard, ID: 223 hil_kbd: probe of serio1 failed with error -5 ..............................not responding... sda : READ CAPACITY failed. sda : status=1, message=00, host=0, driver=08 sd: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 sda: Write Protect is on sda: Mode Sense: 37 88 80 08 sda: cache data unavailable sda: assuming drive cache: write through sda: Spinning up disk.........ready SCSI device sda: 5120 256-byte hdwr sectors (1 MB) sda: Write Protect is off sda: Mode Sense: 37 88 00 08 sda: cache data unavailable sda: assuming drive cache: write through SCSI device sda: 5120 256-byte hdwr sectors (1 MB) sda: Write Protect is off sda: Mode Sense: 37 88 00 08 sda: cache data unavailable sda: assuming drive cache: write through sda:<6>sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x1 ASCQ=0x0 end_request: I/O error, dev sda, sector 0 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 4 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 6 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 7 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 7 Buffer I/O error on device sda, logical block 0 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 0 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 4 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 6 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 7 sd 0:0:2:0: Device not ready: <6>: Current: sense key=0x2 ASC=0x4 ASCQ=0x0 end_request: I/O error, dev sda, sector 7 Buffer I/O error on device sda, logical block 0 unable to read partition table sd 0:0:2:0: Attached scsi removable disk sda sd 0:0:2:0: Attached scsi generic sg0 type 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 0:0:4:0: Attached scsi CD-ROM sr0 sr 0:0:4:0: Attached scsi generic sg1 type 5 sd 0:0:6:0: Enabling Tag Command Queuing SCSI device sdb: 4194685 512-byte hdwr sectors (2148 MB) sdb: Write Protect is off sdb: Mode Sense: 87 00 10 08 SCSI device sdb: drive cache: write back w/ FUA SCSI device sdb: 4194685 512-byte hdwr sectors (2148 MB) sdb: Write Protect is off sdb: Mode Sense: 87 00 10 08 SCSI device sdb: drive cache: write back w/ FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 0:0:6:0: Attached scsi disk sdb sd 0:0:6:0: Attached scsi generic sg2 type 0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 376k freed Adding 267924k swap on /dev/sdb3. Priority:-1 extents:1 across:267924k EXT3 FS on sdb4, internal journal eth0: link ok. eth0: no IPv6 routers present _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux