From: Nicolas DET <nd@bplan-gmbh.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: akpm@osdl.org, sl@bplan-gmbh.de, linuxppc-dev@ozlabs.org,
linuxppc-embedded@ozlabs.org, sha@pengutronix.de
Subject: Re: [PATCH] General CHRP/MPC5K2 platform support patch
Date: Fri, 27 Oct 2006 16:52:27 +0200 (MEST) [thread overview]
Message-ID: <45421C97.80501@bplan-gmbh.de> (raw)
In-Reply-To: <1161919709.25682.61.camel@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 771 bytes --]
Benjamin Herrenschmidt wrote:
> On Thu, 2006-10-26 at 14:00 -0600, Grant Likely wrote:
>> My comments are satisfied
>>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>
> Nack.
>
> The irq code doesn't properly use the genirq infrastructure. It's not
> setting flow handlers, not implementing set_irq_type, not using the new
> mask/unmask instead of the toplevel enable/disable...
>
>
Done.
We agree on IRC last night to postpone this implementation later on.
However, here it is.
This patch compiles fine when applied to the kernel 2.6.19-rc3. I also
tested gcc 3.3.5 and 4.1.2.
I made some tests and did not found any issue. However, more
testing/stressing/torturing and also with on others platforms is
required to fully validate the driver.
Regards
[-- Attachment #2: chrpmpc52xx_2.6.19-rc3.patch --]
[-- Type: text/plain, Size: 24917 bytes --]
--- a/arch/powerpc/sysdev/Makefile 2006-10-25 19:07:24.000000000 +0200
+++ b/arch/powerpc/sysdev/Makefile 2006-10-27 15:31:41.000000000 +0200
@@ -13,6 +13,7 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
+obj-$(CONFIG_PPC_MPC52xx_PIC) += mpc52xx_pic.o
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
--- a/arch/powerpc/sysdev/mpc52xx_pic.c 1970-01-01 01:00:00.000000000 +0100
+++ b/arch/powerpc/sysdev/mpc52xx_pic.c 2006-10-27 15:58:29.000000000 +0200
@@ -0,0 +1,414 @@
+/*
+ * arch/powerpc/sysdev/mpc52xx_pic.c
+ *
+ * Programmable Interrupt Controller functions for the Freescale MPC52xx
+ * embedded CPU.
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based on (well, mostly copied from) the code from the 2.4 kernel by
+ * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 Montavista Software, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#undef DEBUG
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/hardirq.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/mpc52xx.h>
+
+static struct mpc52xx_intr __iomem *intr;
+static struct mpc52xx_sdma __iomem *sdma;
+static struct irq_host *mpc52xx_irqhost = NULL;
+
+static void mpc52xx_ic_mask(unsigned int virq)
+{
+ u32 val;
+ int irq;
+ int l1irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l1=%d, l2=%d\n", __func__, irq, l1irq, l2irq);
+
+ switch (l1irq) {
+ case MPC52xx_IRQ_L1_CRIT:
+ if (l2irq != 0)
+ BUG();
+
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << 11);
+ out_be32(&intr->ctrl, val);
+ break;
+
+ case MPC52xx_IRQ_L1_MAIN:
+ if ( (l2irq >= 1) && (l2irq <= 3) ) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << (11 - l2irq));
+ out_be32(&intr->ctrl, val);
+ } else {
+ val = in_be32(&intr->main_mask);
+ val |= 1 << (16 - l2irq);
+ out_be32(&intr->main_mask, val);
+ }
+ break;
+
+ case MPC52xx_IRQ_L1_PERP:
+ val = in_be32(&intr->per_mask);
+ val |= 1 << (31 - l2irq);
+ out_be32(&intr->per_mask, val);
+ break;
+
+ case MPC52xx_IRQ_L1_SDMA:
+ val = in_be32(&sdma->IntMask);
+ val |= 1 << l2irq;
+ out_be32(&sdma->IntMask, val);
+ break;
+
+ default:
+ printk(KERN_ERR "MPC52xx PIC: Wrong interrupt\n");
+ }
+}
+
+static void mpc52xx_ic_unmask(unsigned int virq)
+{
+ u32 val;
+ int irq;
+ int l1irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l1=%d, l2=%d\n", __func__, irq, l1irq, l2irq);
+
+ switch (l1irq) {
+ case MPC52xx_IRQ_L1_CRIT:
+ if (l2irq != 0)
+ BUG();
+
+ val = in_be32(&intr->ctrl);
+ val |= 1 << 11;
+ out_be32(&intr->ctrl, val);
+ break;
+
+ case MPC52xx_IRQ_L1_MAIN:
+ if ( (l2irq >= 1) && (l2irq <= 3) ) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << (11 - l2irq);
+ out_be32(&intr->ctrl, val);
+ } else {
+ val = in_be32(&intr->main_mask);
+ val &= ~(1 << (16 - l2irq));
+ out_be32(&intr->main_mask, val);
+ }
+ break;
+
+ case MPC52xx_IRQ_L1_PERP:
+ val = in_be32(&intr->per_mask);
+ val &= ~(1 << (31 - l2irq));
+ out_be32(&intr->per_mask, val);
+ break;
+
+ case MPC52xx_IRQ_L1_SDMA:
+ val = in_be32(&sdma->IntMask);
+ val &= ~(1 << l2irq);
+ out_be32(&sdma->IntMask, val);
+ break;
+
+ default:
+ printk(KERN_ERR "MPC52xx PIC: Wrong interrupt\n");
+ }
+}
+
+static void mpc52xx_ic_ack(unsigned int virq)
+{
+ u32 val;
+ int irq;
+ int l1irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l1=%d, l2=%d\n", __func__, irq, l1irq, l2irq);
+
+ switch (l1irq) {
+ case MPC52xx_IRQ_L1_CRIT:
+ if (l2irq != 0)
+ BUG();
+
+ val = in_be32(&intr->ctrl);
+ val |= 0x08000000;
+ out_be32(&intr->ctrl, val);
+ break;
+
+ case MPC52xx_IRQ_L1_MAIN:
+ if ( (l2irq >= 1) && (l2irq <= 3) ) {
+ val = in_be32(&intr->ctrl);
+ val |= 0x08000000 >> l2irq;
+ out_be32(&intr->ctrl, val);
+ }
+ break;
+
+ case MPC52xx_IRQ_L1_PERP:
+ val = in_be32(&intr->per_mask);
+ val &= ~(1 << (31 - l2irq));
+ out_be32(&intr->per_mask, val);
+ break;
+
+ case MPC52xx_IRQ_L1_SDMA:
+ out_be32(&sdma->IntPend, 1 << l2irq);
+ break;
+
+ default:
+ printk(KERN_ERR "MPC52xx PIC: Wrong interrupt\n");
+ }
+}
+
+static void mpc52xx_ic_mask_and_ack(unsigned int irq)
+{
+ mpc52xx_ic_mask(irq);
+ mpc52xx_ic_ack(irq);
+}
+
+static struct irq_chip mpc52xx_irqchip = {
+ .typename = " MPC52xx ",
+ .mask = mpc52xx_ic_mask,
+ .unmask = mpc52xx_ic_unmask,
+ .mask_ack = mpc52xx_ic_mask_and_ack,
+};
+
+static int mpc52xx_irqhost_match(struct irq_host *h, struct device_node *node)
+{
+ pr_debug("%s: %p vs %p\n", __func__, find_mpc52xx_picnode(), node);
+ return find_mpc52xx_picnode() == node;
+}
+
+static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
+ u32 * intspec, unsigned int intsize,
+ irq_hw_number_t * out_hwirq,
+ unsigned int *out_flags)
+{
+ static unsigned char map_senses[4] = {
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_LEVEL_LOW,
+ };
+
+ int intrvect_l1;
+ int intrvect_l2;
+ int intrvect_type;
+ int intrvect_linux;
+
+ if (intsize != 3)
+ return -1;
+
+ intrvect_l1 = (int)intspec[0];
+ intrvect_l2 = (int)intspec[1];
+ intrvect_type = (int)intspec[2];
+
+ pr_debug("l1=%d, l2=%d, type=%d\n", intrvect_l1, intrvect_l2,
+ intrvect_type);
+
+ intrvect_linux =
+ (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK;
+ intrvect_linux |=
+ (intrvect_l2 << MPC52xx_IRQ_L2_OFFSET) & MPC52xx_IRQ_L2_MASK;
+
+ pr_debug("return %x\n", intrvect_linux);
+
+ *out_hwirq = intrvect_linux;
+ *out_flags = map_senses[intrvect_type];
+
+ return 0;
+
+}
+
+static int mpc52xx_islevel(int num)
+{
+ u32 ictl_req;
+ int ictl_type;
+
+ ictl_req = in_be32(&intr->ctrl);
+ ictl_type = (ictl_req >> 16) & 0x3;
+
+ switch (ictl_type) {
+ case 0:
+ case 3:
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t irq)
+{
+ int l1irq;
+ int l2irq;
+ unsigned int status;
+
+ l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ status = get_irq_desc(virq)->status;
+
+ switch (l1irq) {
+ case MPC52xx_IRQ_L1_CRIT:
+ if (l2irq != 0)
+ BUG();
+ if (mpc52xx_islevel(0))
+ status |= IRQ_LEVEL;
+ break;
+
+ case MPC52xx_IRQ_L1_MAIN:
+ if (mpc52xx_islevel(l2irq))
+ status |= IRQ_LEVEL;
+ break;
+
+ default:
+ status |= IRQ_LEVEL;
+ }
+
+ get_irq_desc(virq)->status = status;
+ set_irq_chip_and_handler(virq, &mpc52xx_irqchip,
+ (status & IRQ_LEVEL) ? handle_level_irq :
+ handle_edge_irq);
+
+ pr_debug("%s: virq=%x, hw=%x. desc status=%x\n", __func__, virq,
+ (int)irq, status);
+
+ return 0;
+}
+
+void mpc52xx_irqhost_unmap(struct irq_host *h, unsigned int virq)
+{
+ pr_debug("%s: v=%x\n", __func__, virq);
+
+ mpc52xx_ic_mask(virq);
+ set_irq_chip_and_handler(virq, NULL, NULL);
+ synchronize_irq(virq);
+}
+
+static struct irq_host_ops mpc52xx_irqhost_ops = {
+ .match = mpc52xx_irqhost_match,
+ .xlate = mpc52xx_irqhost_xlate,
+ .map = mpc52xx_irqhost_map,
+ .unmap = mpc52xx_irqhost_unmap,
+};
+
+void __init mpc52xx_init_irq(void)
+{
+ int i;
+ u32 intr_ctrl;
+
+ /* Remap the necessary zones */
+ intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
+ sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
+
+ if ((intr == NULL) || (sdma == NULL))
+ panic("Can't ioremap PIC/SDMA register or init_irq !");
+
+ /* Disable all interrupt sources. */
+ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
+ out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
+ out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
+ out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
+ intr_ctrl = in_be32(&intr->ctrl);
+ intr_ctrl &= 0x00ff0000; /* Keeps IRQ[0-3] config */
+ intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
+ 0x00001000 | /* MEE master external enable */
+ 0x00000000 | /* 0 means disable IRQ 0-3 */
+ 0x00000001; /* CEb route critical normally */
+ out_be32(&intr->ctrl, intr_ctrl);
+
+ /* Zero a bunch of the priority settings. */
+ out_be32(&intr->per_pri1, 0);
+ out_be32(&intr->per_pri2, 0);
+ out_be32(&intr->per_pri3, 0);
+ out_be32(&intr->main_pri1, 0);
+ out_be32(&intr->main_pri2, 0);
+ /* Initialize irq_desc[i].handler's with mpc52xx_ic. */
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].chip = &mpc52xx_irqchip;
+ irq_desc[i].status = IRQ_LEVEL;
+
+ }
+
+ /*
+ * As last step, add an irq host to translate the real
+ * hw irq information provided by the ofw to linux virq
+ */
+
+ mpc52xx_irqhost =
+ irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_IRQS, &mpc52xx_irqhost_ops,
+ -1);
+}
+
+unsigned int mpc52xx_get_irq(void)
+{
+ u32 status;
+ int irq = NO_IRQ_IGNORE;
+
+ status = in_be32(&intr->enc_status);
+ if (status & 0x00000400) { /* critical */
+ irq = (status >> 8) & 0x3;
+ if (irq == 2) /* high priority peripheral */
+ goto peripheral;
+ irq |=
+ (MPC52xx_IRQ_L1_CRIT << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+ } else if (status & 0x00200000) { /* main */
+ irq = (status >> 16) & 0x1f;
+ if (irq == 4) /* low priority peripheral */
+ goto peripheral;
+ irq |=
+ (MPC52xx_IRQ_L1_MAIN << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+ } else if (status & 0x20000000) { /* peripheral */
+ peripheral:
+ irq = (status >> 24) & 0x1f;
+ if (irq == 0) { /* bestcomm */
+ status = in_be32(&sdma->IntPend);
+ irq = ffs(status) - 1;
+ irq |=
+ (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+ } else
+ irq |=
+ (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+
+ }
+
+ pr_debug("%s: irq=%x. virq=%d\n", __func__, irq,
+ irq_linear_revmap(mpc52xx_irqhost, irq));
+
+ return irq_linear_revmap(mpc52xx_irqhost, irq);
+}
--- a/arch/powerpc/Kconfig 2006-10-25 19:07:23.000000000 +0200
+++ b/arch/powerpc/Kconfig 2006-10-27 15:50:21.000000000 +0200
@@ -384,6 +384,11 @@ config PPC_CHRP
select PPC_RTAS
select PPC_MPC106
select PPC_UDBG_16550
+ select PPC_MPC52xx_PIC
+ default y
+
+config PPC_MPC52xx_PIC
+ bool
default y
config PPC_PMAC
--- a/arch/powerpc/platforms/chrp/setup.c 2006-10-25 19:07:23.000000000 +0200
+++ b/arch/powerpc/platforms/chrp/setup.c 2006-10-27 16:08:03.000000000 +0200
@@ -51,6 +51,7 @@
#include <asm/mpic.h>
#include <asm/rtas.h>
#include <asm/xmon.h>
+#include <asm/mpc52xx.h>
#include "chrp.h"
@@ -435,6 +436,18 @@ static struct irqaction xmon_irqaction =
};
#endif
+static int __init chrp_find_mpc52xx_pic(void)
+{
+ if (find_mpc52xx_picnode()) {
+ printk(KERN_INFO "Found MPC52xx Interrupt Controller\n");
+ ppc_md.get_irq = mpc52xx_get_irq;
+ mpc52xx_init_irq();
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
static void __init chrp_find_8259(void)
{
struct device_node *np, *pic = NULL;
@@ -496,6 +509,7 @@ void __init chrp_init_IRQ(void)
#endif
chrp_find_openpic();
chrp_find_8259();
+ chrp_find_mpc52xx_pic();
#ifdef CONFIG_SMP
/* Pegasos has no MPIC, those ops would make it crash. It might be an
diff -uprN a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
--- a/include/asm-powerpc/mpc52xx.h 1970-01-01 01:00:00.000000000 +0100
+++ b/include/asm-powerpc/mpc52xx.h 2006-10-27 15:51:55.000000000 +0200
@@ -0,0 +1,414 @@
+/*
+ * include/asm-ppc/mpc52xx.h
+ *
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Originally written by Dale Farnsworth <dfarnsworth@mvista.com>
+ * for the 2.4 kernel.
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_POWERPC_MPC52xx_H__
+#define __ASM_POWERPC_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/prom.h>
+
+#endif /* __ASSEMBLY__ */
+
+
+#ifdef CONFIG_PCI
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#endif
+
+
+/* ======================================================================== */
+/* PPC Sys devices definition */
+/* ======================================================================== */
+
+enum ppc_sys_devices {
+ MPC52xx_MSCAN1,
+ MPC52xx_MSCAN2,
+ MPC52xx_SPI,
+ MPC52xx_USB,
+ MPC52xx_BDLC,
+ MPC52xx_PSC1,
+ MPC52xx_PSC2,
+ MPC52xx_PSC3,
+ MPC52xx_PSC4,
+ MPC52xx_PSC5,
+ MPC52xx_PSC6,
+ MPC52xx_FEC,
+ MPC52xx_ATA,
+ MPC52xx_I2C1,
+ MPC52xx_I2C2,
+ NUM_PPC_SYS_DEVS,
+};
+
+
+/* ======================================================================== */
+/* Main registers/struct addresses */
+/* ======================================================================== */
+
+/* MBAR position */
+#define MPC52xx_MBAR 0xf0000000 /* Phys address */
+#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */
+#define MPC52xx_MBAR_SIZE 0x00010000
+
+#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x)))
+#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT + (x)))
+
+/* Registers zone offset/size */
+#define MPC52xx_MMAP_CTL_OFFSET 0x0000
+#define MPC52xx_MMAP_CTL_SIZE 0x068
+#define MPC52xx_SDRAM_OFFSET 0x0100
+#define MPC52xx_SDRAM_SIZE 0x010
+#define MPC52xx_CDM_OFFSET 0x0200
+#define MPC52xx_CDM_SIZE 0x038
+#define MPC52xx_INTR_OFFSET 0x0500
+#define MPC52xx_INTR_SIZE 0x04c
+#define MPC52xx_GPTx_OFFSET(x) (0x0600 + ((x)<<4))
+#define MPC52xx_GPT_SIZE 0x010
+#define MPC52xx_RTC_OFFSET 0x0800
+#define MPC52xx_RTC_SIZE 0x024
+#define MPC52xx_GPIO_OFFSET 0x0b00
+#define MPC52xx_GPIO_SIZE 0x040
+#define MPC52xx_GPIO_WKUP_OFFSET 0x0c00
+#define MPC52xx_GPIO_WKUP_SIZE 0x028
+#define MPC52xx_PCI_OFFSET 0x0d00
+#define MPC52xx_PCI_SIZE 0x100
+#define MPC52xx_SDMA_OFFSET 0x1200
+#define MPC52xx_SDMA_SIZE 0x100
+#define MPC52xx_XLB_OFFSET 0x1f00
+#define MPC52xx_XLB_SIZE 0x100
+#define MPC52xx_PSCx_OFFSET(x) (((x)!=6)?(0x1e00+((x)<<9)):0x2c00)
+#define MPC52xx_PSC_SIZE 0x0a0
+
+/* SRAM used for SDMA */
+#define MPC52xx_SRAM_OFFSET 0x8000
+#define MPC52xx_SRAM_SIZE 0x4000
+
+
+/* ======================================================================== */
+/* IRQ mapping */
+/* ======================================================================== */
+
+#define MPC52xx_IRQ_L1_CRIT 0
+#define MPC52xx_IRQ_L1_MAIN 1
+#define MPC52xx_IRQ_L1_PERP 2
+#define MPC52xx_IRQ_L1_SDMA 3
+
+#define MPC52xx_IRQ_L1_OFFSET (6)
+#define MPC52xx_IRQ_L1_MASK (0xc0)
+
+#define MPC52xx_IRQ_L2_OFFSET (0)
+#define MPC52xx_IRQ_L2_MASK (0x3f)
+
+
+/* ======================================================================== */
+/* Structures mapping of some unit register set */
+/* ======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+ u32 mbar; /* MMAP_CTRL + 0x00 */
+
+ u32 cs0_start; /* MMAP_CTRL + 0x04 */
+ u32 cs0_stop; /* MMAP_CTRL + 0x08 */
+ u32 cs1_start; /* MMAP_CTRL + 0x0c */
+ u32 cs1_stop; /* MMAP_CTRL + 0x10 */
+ u32 cs2_start; /* MMAP_CTRL + 0x14 */
+ u32 cs2_stop; /* MMAP_CTRL + 0x18 */
+ u32 cs3_start; /* MMAP_CTRL + 0x1c */
+ u32 cs3_stop; /* MMAP_CTRL + 0x20 */
+ u32 cs4_start; /* MMAP_CTRL + 0x24 */
+ u32 cs4_stop; /* MMAP_CTRL + 0x28 */
+ u32 cs5_start; /* MMAP_CTRL + 0x2c */
+ u32 cs5_stop; /* MMAP_CTRL + 0x30 */
+
+ u32 sdram0; /* MMAP_CTRL + 0x34 */
+ u32 sdram1; /* MMAP_CTRL + 0X38 */
+
+ u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */
+
+ u32 boot_start; /* MMAP_CTRL + 0x4c */
+ u32 boot_stop; /* MMAP_CTRL + 0x50 */
+
+ u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */
+
+ u32 cs6_start; /* MMAP_CTRL + 0x58 */
+ u32 cs6_stop; /* MMAP_CTRL + 0x5c */
+ u32 cs7_start; /* MMAP_CTRL + 0x60 */
+ u32 cs7_stop; /* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+ u32 mode; /* SDRAM + 0x00 */
+ u32 ctrl; /* SDRAM + 0x04 */
+ u32 config1; /* SDRAM + 0x08 */
+ u32 config2; /* SDRAM + 0x0c */
+};
+
+/* Interrupt controller */
+struct mpc52xx_intr {
+ u32 per_mask; /* INTR + 0x00 */
+ u32 per_pri1; /* INTR + 0x04 */
+ u32 per_pri2; /* INTR + 0x08 */
+ u32 per_pri3; /* INTR + 0x0c */
+ u32 ctrl; /* INTR + 0x10 */
+ u32 main_mask; /* INTR + 0x14 */
+ u32 main_pri1; /* INTR + 0x18 */
+ u32 main_pri2; /* INTR + 0x1c */
+ u32 reserved1; /* INTR + 0x20 */
+ u32 enc_status; /* INTR + 0x24 */
+ u32 crit_status; /* INTR + 0x28 */
+ u32 main_status; /* INTR + 0x2c */
+ u32 per_status; /* INTR + 0x30 */
+ u32 reserved2; /* INTR + 0x34 */
+ u32 per_error; /* INTR + 0x38 */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+ u32 taskBar; /* SDMA + 0x00 */
+ u32 currentPointer; /* SDMA + 0x04 */
+ u32 endPointer; /* SDMA + 0x08 */
+ u32 variablePointer;/* SDMA + 0x0c */
+
+ u8 IntVect1; /* SDMA + 0x10 */
+ u8 IntVect2; /* SDMA + 0x11 */
+ u16 PtdCntrl; /* SDMA + 0x12 */
+
+ u32 IntPend; /* SDMA + 0x14 */
+ u32 IntMask; /* SDMA + 0x18 */
+
+ u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */
+
+ u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */
+
+ u32 cReqSelect; /* SDMA + 0x5c */
+ u32 task_size0; /* SDMA + 0x60 */
+ u32 task_size1; /* SDMA + 0x64 */
+ u32 MDEDebug; /* SDMA + 0x68 */
+ u32 ADSDebug; /* SDMA + 0x6c */
+ u32 Value1; /* SDMA + 0x70 */
+ u32 Value2; /* SDMA + 0x74 */
+ u32 Control; /* SDMA + 0x78 */
+ u32 Status; /* SDMA + 0x7c */
+ u32 PTDDebug; /* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+ u32 mode; /* GPTx + 0x00 */
+ u32 count; /* GPTx + 0x04 */
+ u32 pwm; /* GPTx + 0x08 */
+ u32 status; /* GPTx + 0X0c */
+};
+
+/* RTC */
+struct mpc52xx_rtc {
+ u32 time_set; /* RTC + 0x00 */
+ u32 date_set; /* RTC + 0x04 */
+ u32 stopwatch; /* RTC + 0x08 */
+ u32 int_enable; /* RTC + 0x0c */
+ u32 time; /* RTC + 0x10 */
+ u32 date; /* RTC + 0x14 */
+ u32 stopwatch_intr; /* RTC + 0x18 */
+ u32 bus_error; /* RTC + 0x1c */
+ u32 dividers; /* RTC + 0x20 */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+ u32 port_config; /* GPIO + 0x00 */
+ u32 simple_gpioe; /* GPIO + 0x04 */
+ u32 simple_ode; /* GPIO + 0x08 */
+ u32 simple_ddr; /* GPIO + 0x0c */
+ u32 simple_dvo; /* GPIO + 0x10 */
+ u32 simple_ival; /* GPIO + 0x14 */
+ u8 outo_gpioe; /* GPIO + 0x18 */
+ u8 reserved1[3]; /* GPIO + 0x19 */
+ u8 outo_dvo; /* GPIO + 0x1c */
+ u8 reserved2[3]; /* GPIO + 0x1d */
+ u8 sint_gpioe; /* GPIO + 0x20 */
+ u8 reserved3[3]; /* GPIO + 0x21 */
+ u8 sint_ode; /* GPIO + 0x24 */
+ u8 reserved4[3]; /* GPIO + 0x25 */
+ u8 sint_ddr; /* GPIO + 0x28 */
+ u8 reserved5[3]; /* GPIO + 0x29 */
+ u8 sint_dvo; /* GPIO + 0x2c */
+ u8 reserved6[3]; /* GPIO + 0x2d */
+ u8 sint_inten; /* GPIO + 0x30 */
+ u8 reserved7[3]; /* GPIO + 0x31 */
+ u16 sint_itype; /* GPIO + 0x34 */
+ u16 reserved8; /* GPIO + 0x36 */
+ u8 gpio_control; /* GPIO + 0x38 */
+ u8 reserved9[3]; /* GPIO + 0x39 */
+ u8 sint_istat; /* GPIO + 0x3c */
+ u8 sint_ival; /* GPIO + 0x3d */
+ u8 bus_errs; /* GPIO + 0x3e */
+ u8 reserved10; /* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
+#define MPC52xx_GPIO_PCI_DIS (1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+ u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
+ u8 reserved1[3]; /* GPIO_WKUP + 0x03 */
+ u8 wkup_ode; /* GPIO_WKUP + 0x04 */
+ u8 reserved2[3]; /* GPIO_WKUP + 0x05 */
+ u8 wkup_ddr; /* GPIO_WKUP + 0x08 */
+ u8 reserved3[3]; /* GPIO_WKUP + 0x09 */
+ u8 wkup_dvo; /* GPIO_WKUP + 0x0C */
+ u8 reserved4[3]; /* GPIO_WKUP + 0x0D */
+ u8 wkup_inten; /* GPIO_WKUP + 0x10 */
+ u8 reserved5[3]; /* GPIO_WKUP + 0x11 */
+ u8 wkup_iinten; /* GPIO_WKUP + 0x14 */
+ u8 reserved6[3]; /* GPIO_WKUP + 0x15 */
+ u16 wkup_itype; /* GPIO_WKUP + 0x18 */
+ u8 reserved7[2]; /* GPIO_WKUP + 0x1A */
+ u8 wkup_maste; /* GPIO_WKUP + 0x1C */
+ u8 reserved8[3]; /* GPIO_WKUP + 0x1D */
+ u8 wkup_ival; /* GPIO_WKUP + 0x20 */
+ u8 reserved9[3]; /* GPIO_WKUP + 0x21 */
+ u8 wkup_istat; /* GPIO_WKUP + 0x24 */
+ u8 reserved10[3]; /* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+ u8 reserved[0x40];
+ u32 config; /* XLB + 0x40 */
+ u32 version; /* XLB + 0x44 */
+ u32 status; /* XLB + 0x48 */
+ u32 int_enable; /* XLB + 0x4c */
+ u32 addr_capture; /* XLB + 0x50 */
+ u32 bus_sig_capture; /* XLB + 0x54 */
+ u32 addr_timeout; /* XLB + 0x58 */
+ u32 data_timeout; /* XLB + 0x5c */
+ u32 bus_act_timeout; /* XLB + 0x60 */
+ u32 master_pri_enable; /* XLB + 0x64 */
+ u32 master_priority; /* XLB + 0x68 */
+ u32 base_address; /* XLB + 0x6c */
+ u32 snoop_window; /* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
+#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+ u32 jtag_id; /* CDM + 0x00 reg0 read only */
+ u32 rstcfg; /* CDM + 0x04 reg1 read only */
+ u32 breadcrumb; /* CDM + 0x08 reg2 */
+
+ u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */
+ u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */
+ u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */
+ u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */
+
+ u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */
+ u8 fd_enable; /* CDM + 0x11 reg4 byte1 */
+ u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */
+
+ u32 clk_enables; /* CDM + 0x14 reg5 */
+
+ u8 osc_disable; /* CDM + 0x18 reg6 byte0 */
+ u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */
+
+ u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */
+ u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */
+ u8 reserved1; /* CDM + 0x1e reg7 byte2 */
+ u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */
+
+ u8 soft_reset; /* CDM + 0x20 u8 byte0 */
+ u8 no_ckstp; /* CDM + 0x21 u8 byte0 */
+ u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */
+
+ u8 pll_lock; /* CDM + 0x24 reg9 byte0 */
+ u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */
+ u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */
+ u8 reserved3; /* CDM + 0x27 reg9 byte3 */
+
+ u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */
+ u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */
+
+ u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */
+ u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */
+
+ u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */
+ u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */
+
+ u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */
+ u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Prototypes for MPC52xx syslib */
+/* ========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+extern void mpc52xx_init_irq(void);
+extern unsigned int mpc52xx_get_irq(void);
+
+extern unsigned long mpc52xx_find_end_of_memory(void);
+extern void mpc52xx_set_bat(void);
+extern void mpc52xx_map_io(void);
+extern void mpc52xx_restart(char *cmd);
+extern void mpc52xx_halt(void);
+extern void mpc52xx_power_off(void);
+extern void mpc52xx_progress(char *s, unsigned short hex);
+extern void mpc52xx_calibrate_decr(void);
+
+extern void mpc52xx_find_bridges(void);
+
+extern void mpc52xx_setup_cpu(void);
+
+static inline struct device_node *
+find_mpc52xx_picnode(void)
+{
+ return of_find_compatible_node(NULL, "interrupt-controller", "mpc5200-pic");
+}
+
+ /* Matching of PSC function */
+struct mpc52xx_psc_func {
+ int id;
+ char *func;
+};
+
+extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
+extern struct mpc52xx_psc_func mpc52xx_psc_functions[];
+ /* This array is to be defined in platform file */
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _ASM_POWERPC_MPC52xx_H__ */
[-- Attachment #3: nd.vcf --]
[-- Type: text/x-vcard, Size: 249 bytes --]
begin:vcard
fn:Nicolas DET ( bplan GmbH )
n:DET;Nicolas
org:bplan GmbH
adr:;;;;;;Germany
email;internet:nd@bplan-gmbh.de
title:Software Entwicklung
tel;work:+49 6171 9187 - 31
x-mozilla-html:FALSE
url:http://www.bplan-gmbh.de
version:2.1
end:vcard
next prev parent reply other threads:[~2006-10-27 14:52 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-25 19:05 [PATCH] General CHRP/MPC5K2 platform support patch Nicolas DET
2006-10-25 21:59 ` Paul Mackerras
2006-10-25 22:41 ` Grant Likely
2006-10-25 22:59 ` Benjamin Herrenschmidt
2006-10-26 11:09 ` Nicolas DET
2006-10-26 11:17 ` Nicolas DET
2006-10-25 22:53 ` Benjamin Herrenschmidt
2006-10-26 11:09 ` Nicolas DET
2006-10-26 12:49 ` Benjamin Herrenschmidt
2006-10-26 12:59 ` Nicolas DET
2006-10-26 16:02 ` Grant Likely
2006-10-26 16:09 ` Grant Likely
2006-10-26 17:06 ` Nicolas DET
2006-10-26 17:54 ` Sylvain Munaut
2006-10-27 3:08 ` Benjamin Herrenschmidt
2006-10-26 19:14 ` Grant Likely
2006-10-26 19:21 ` Nicolas DET
2006-10-26 19:32 ` Nicolas DET
2006-10-27 2:49 ` Benjamin Herrenschmidt
2006-10-26 16:45 ` Sven Luther
2006-10-26 19:50 ` Nicolas DET
2006-10-26 20:00 ` Grant Likely
2006-10-26 20:51 ` Sylvain Munaut
2006-10-27 3:28 ` Benjamin Herrenschmidt
2006-10-27 14:52 ` Nicolas DET [this message]
2006-10-27 15:04 ` Nicolas DET
2006-10-27 17:08 ` Jon Loeliger
2006-10-28 0:27 ` Stephen Rothwell
2006-10-27 22:34 ` Benjamin Herrenschmidt
2006-10-27 22:05 ` Sylvain Munaut
2006-10-25 23:01 ` Grant Likely
2006-10-25 23:06 ` Benjamin Herrenschmidt
2006-10-25 23:13 ` Sven Luther
2006-10-26 12:09 ` Nicolas DET
2006-10-26 12:51 ` Benjamin Herrenschmidt
2006-10-26 17:17 ` John Rigby
2006-10-26 17:23 ` Nicolas DET
2006-10-26 17:33 ` Sylvain Munaut
2006-10-27 3:03 ` Benjamin Herrenschmidt
2006-10-27 2:57 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45421C97.80501@bplan-gmbh.de \
--to=nd@bplan-gmbh.de \
--cc=akpm@osdl.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=linuxppc-embedded@ozlabs.org \
--cc=sha@pengutronix.de \
--cc=sl@bplan-gmbh.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.