From: Bill Davidsen <davidsen@tmr.com>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: Question of PCI bandwidth affect on SW RAID arrays.
Date: Fri, 27 Oct 2006 17:43:08 -0400 [thread overview]
Message-ID: <45427D6C.7030909@tmr.com> (raw)
In-Reply-To: <Pine.LNX.4.64.0610260612270.24154@p34.internal.lan>
Justin Piszcz wrote:
>Quick question,
>
>On older systems, regular PCI motherboards, no PCI-e-- which is faster?
>
>1) One 4 port SATA150 card in 1 PCI slot which has 4 drives connected.
>2) Four SATA150 cards in 4 PCI slots, which each have 1 drive connected?
>
>I'd assume 2 would stress the PCI bus more and thus would be slower, but I
>am curious what other people know/think/etc?
>
You are sending the same amount of data over the bus in either case,
assuming you are using s/w RAID. This is where (real) hardware RAID has
an advantage in performance, the parity doesn't go over the bus. If you
have a server board it may have multiple PCI busses, and therefore a
higher max bandwidth with multiple cards. I would still expect PCI-e to
be faster.
--
bill davidsen <davidsen@tmr.com>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
prev parent reply other threads:[~2006-10-27 21:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-26 10:15 Question of PCI bandwidth affect on SW RAID arrays Justin Piszcz
2006-10-27 21:43 ` Bill Davidsen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45427D6C.7030909@tmr.com \
--to=davidsen@tmr.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.