From: Dirk Behme <dirk.behme@googlemail.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH] ARM: OMAP1: Fix CONFIG_DEBUG_LL
Date: Sat, 28 Oct 2006 08:15:33 +0200 [thread overview]
Message-ID: <4542F585.1070604@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 278 bytes --]
Fix broken CONFIG_DEBUG_LL. In case of low level debugging
reconfigure some clocks early.
See
http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093
too.
Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
[-- Attachment #2: omap1_CONFIG_DEBUG_LL_patch.txt --]
[-- Type: text/plain, Size: 640 bytes --]
Index: linux-osk/arch/arm/mach-omap1/clock.c
===================================================================
--- linux-osk.orig/arch/arm/mach-omap1/clock.c
+++ linux-osk/arch/arm/mach-omap1/clock.c
@@ -649,6 +649,13 @@ int __init omap1_clk_init(void)
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
+#ifdef CONFIG_DEBUG_LL
+ /* Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on.
+ */
+ omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
reply other threads:[~2006-10-28 6:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4542F585.1070604@gmail.com \
--to=dirk.behme@googlemail.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.