From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Eric W. Davenport" Subject: gMFSK & QSSTV Date: Mon, 30 Oct 2006 18:17:12 -0500 Message-ID: <454687F8.9010303@certin.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-hams@vger.kernel.org, a.bolduc@comcast.net I too have a box with 2 sound cards and a TV Card in it. The Radio connections are through the SoundBlaster Audigy (dev/dsp1 ) mounted in a PCI Slot the computer speakers are on the MB Sound Card. Radio In is to Line IN and Radio OUT is through the Headphone connection. I am using a rigblaster to interface. Once I figured out which one was the SB Audigy gMFSK works great in all modes. I have not changed any of the default conditions. All I did was set up the audio card to the proper unit bring up the mixer make sure that I was changing the SB Card and everything started working. I am however having trouble with QSSTV. I cannot get a picture. (Ver 5.03c) I am getting video but it is distorted looks like it lying down. Slant will not help. I have been playing with my sampling rates and nothing helps I have been up at 11000 where MixW was and as low as 7000 nothing seems to change it. I saw the script that Al uses and would like to try it but.. I have never created a script so I do not know where to use it. User a terminal program and run it from there then launch QSSTV, does not seem like it will work since it requires SU. If I am in SU then if I launch QSSTV it will not find the config file. So I am confused and if anybody can help me I would appreciate it. Eric KZ5ED