From: Olivier Nicolas <olivn@trollprod.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6.19-rc5 x86_64 irq 22: nobody cared
Date: Wed, 08 Nov 2006 13:44:29 +0100 [thread overview]
Message-ID: <4551D12D.4010304@trollprod.org> (raw)
Hi,
2.6.19-rc5 does not boot properly, I have tried pci=routeirq, irpoll
without success.
Full details (.config, dmesg, /proc/interrupts) are in
http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz
Olivier
System: ASUS M2N32-SLI, AMD64 X2 Dual Core 4600
kernel 2.6.9-rc5
irq 22: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ> [<ffffffff80259055>] __report_bad_irq+0x35/0x90
[<ffffffff802592d3>] note_interrupt+0x223/0x280
[<ffffffff80259d41>] handle_fasteoi_irq+0xb1/0xf0
[<ffffffff8020b17c>] call_softirq+0x1c/0x30
[<ffffffff8020d1ba>] do_IRQ+0x8a/0xe0
[<ffffffff8020a571>] ret_from_intr+0x0/0xa
<EOI>
handlers:
[<ffffffff8807f150>] (nv_generic_interrupt+0x0/0xc0 [sata_nv])
Disabling IRQ #22
CPU0 CPU1
0: 223 45540 IO-APIC-edge timer
1: 1 402 IO-APIC-edge i8042
6: 1 4 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 0 103 IO-APIC-edge i8042
14: 7 140 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi libata
17: 0 10 IO-APIC-fasteoi bttv0
20: 0 20 IO-APIC-fasteoi ehci_hcd:usb1
21: 0 0 IO-APIC-fasteoi libata
22: 214 99786 IO-APIC-fasteoi libata, HDA Intel
23: 76 6230 IO-APIC-fasteoi libata, ohci_hcd:usb2
308: 5 3169 PCI-MSI-edge eth1
309: 0 10 PCI-MSI-edge eth1
310: 0 44 PCI-MSI-edge eth1
311: 1 3193 PCI-MSI-edge eth0
312: 0 0 PCI-MSI-edge eth0
313: 0 1 PCI-MSI-edge eth0
NMI: 64 68
LOC: 45716 45691
ERR: 0
kernel 2.6.19-rc5 with pci=routeirq
irq 21: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ> [<ffffffff80259055>] __report_bad_irq+0x35/0x90
[<ffffffff802592d3>] note_interrupt+0x223/0x280
[<ffffffff80259d41>] handle_fasteoi_irq+0xb1/0xf0
[<ffffffff8020b17c>] call_softirq+0x1c/0x30
[<ffffffff8020d1ba>] do_IRQ+0x8a/0xe0
[<ffffffff802092f0>] default_idle+0x0/0x50
[<ffffffff8020a571>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff80209319>] default_idle+0x29/0x50
[<ffffffff8020939b>] cpu_idle+0x5b/0x80
[<ffffffff8050039c>] start_secondary+0x50c/0x520
handlers:
[<ffffffff880e6fd0>] (usb_hcd_irq+0x0/0x60 [usbcore])
Disabling IRQ #21
CPU0 CPU1
0: 214 24856 IO-APIC-edge timer
1: 0 359 IO-APIC-edge i8042
6: 0 5 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 0 103 IO-APIC-edge i8042
14: 0 128 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi libata
17: 1 2 IO-APIC-fasteoi bttv0
20: 22 6469 IO-APIC-fasteoi libata
21: 11 99989 IO-APIC-fasteoi ehci_hcd:usb2, HDA Intel
22: 0 1 IO-APIC-fasteoi libata, ohci_hcd:usb1
23: 0 0 IO-APIC-fasteoi libata
308: 8 2378 PCI-MSI-edge eth1
309: 0 9 PCI-MSI-edge eth1
310: 0 9 PCI-MSI-edge eth1
311: 4 2401 PCI-MSI-edge eth0
312: 0 0 PCI-MSI-edge eth0
313: 0 1 PCI-MSI-edge eth0
NMI: 74 47
LOC: 25024 24991
ERR: 0
kernel 2.6.19-rc5 with irqpoll
Hang during boot
(See screenshot in http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz)
kernel 2.6.18 (works without any problem)
CPU0 CPU1
0: 1590 998089 IO-APIC-edge timer
1: 2 657 IO-APIC-edge i8042
6: 0 5 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 194 59353 IO-APIC-edge i8042
14: 13 6381 IO-APIC-edge ide0
50: 0 0 IO-APIC-level libata
58: 0 0 IO-APIC-level libata
66: 109 181425 IO-APIC-level libata, nvidia
74: 41 963 IO-APIC-level ehci_hcd:usb1, HDA Intel
82: 4 6 IO-APIC-level bttv0
90: 0 0 PCI-MSI-X eth0
98: 3 0 PCI-MSI-X eth0
106: 212234 0 PCI-MSI-X eth0
114: 532 0 PCI-MSI-X eth1
122: 445 0 PCI-MSI-X eth1
130: 212217 0 PCI-MSI-X eth1
233: 73 23009 IO-APIC-level libata, ohci_hcd:usb2
NMI: 99 104
LOC: 999684 999664
ERR: 0
MIS: 0
next reply other threads:[~2006-11-08 12:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-08 12:44 Olivier Nicolas [this message]
2006-11-09 6:49 ` 2.6.19-rc5 x86_64 irq 22: nobody cared Adrian Bunk
2006-11-09 7:55 ` Yinghai Lu
2006-11-09 9:29 ` Olivier Nicolas
2006-11-09 10:38 ` Takashi Iwai
2006-11-09 16:08 ` Olivier Nicolas
2006-11-09 16:49 ` Stephen Hemminger
2006-11-09 17:12 ` Eric W. Biederman
2006-11-09 8:17 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2006-11-09 21:03 Lu, Yinghai
2006-11-10 2:09 Lu, Yinghai
2006-11-10 9:56 ` Olivier Nicolas
2006-11-10 18:20 Lu, Yinghai
2006-11-10 20:11 ` Eric W. Biederman
2006-11-10 20:16 Lu, Yinghai
2006-11-10 20:22 Lu, Yinghai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4551D12D.4010304@trollprod.org \
--to=olivn@trollprod.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.