From: Geoff Levand <geoffrey.levand@am.sony.com>
To: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 12/16] powerpc: add ps3 platform interrupt support
Date: Fri, 10 Nov 2006 12:03:20 -0800 [thread overview]
Message-ID: <4554DB08.6050804@am.sony.com> (raw)
Adds routines to interface with the ps3pf interrupt services.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3pf/interrupt.c | 583 +++++++++++++++++++++++++++++++
1 file changed, 583 insertions(+)
Index: cell--common--6/arch/powerpc/platforms/ps3pf/interrupt.c
===================================================================
--- /dev/null
+++ cell--common--6/arch/powerpc/platforms/ps3pf/interrupt.c
@@ -0,0 +1,583 @@
+/*
+ * interrupt.c - PS3 Platform interrupt routines.
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define DEBUG 1
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/ps3pf.h>
+#include <asm/lv1call.h>
+
+#include "platform.h"
+
+#if defined(DEBUG)
+#undef pr_debug
+#define pr_debug(fmt...) udbg_printf(fmt)
+#endif
+
+unsigned long ps3pf_legacy_virq_to_outlet(unsigned int virq)
+{
+ return virq_to_hw(virq);
+}
+
+/**
+ * ps3pf_alloc_io_irq - Assign a virq to a system bus device.
+ * interrupt_id: The device interrupt id read from the system repository.
+ * @virq: The assigned Linux virq.
+ *
+ * An io irq represents a non-virtualized device interrupt. interrupt_id
+ * coresponds to the interrupt number of the interrupt controller.
+ */
+
+int ps3pf_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq)
+{
+ int result;
+ unsigned long outlet;
+
+ result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
+
+ if (result) {
+ pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+ return result;
+ }
+
+ *virq = irq_create_mapping(NULL, outlet);
+
+ pr_debug("%s:%d: interrupt_id %u => outlet %lu, virq %u\n",
+ __func__, __LINE__, interrupt_id, outlet, *virq);
+
+ return 0;
+}
+
+int ps3pf_free_io_irq(unsigned int virq)
+{
+ int result;
+
+ result = lv1_destruct_io_irq_outlet(virq_to_hw(virq));
+
+ if (!result)
+ pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+
+ irq_dispose_mapping(virq);
+
+ return result;
+}
+
+/**
+ * ps3pf_alloc_event_irq - Allocate a virq for use with a system event.
+ * @virq: The assigned Linux virq.
+ *
+ * The virq can be used with lv1_connect_interrupt_event_receive_port() to
+ * arrange to receive events, or with ps3pf_send_event_locally() to signal
+ * events.
+ */
+
+int ps3pf_alloc_event_irq(unsigned int *virq)
+{
+ int result;
+ unsigned long outlet;
+
+ result = lv1_construct_event_receive_port(&outlet);
+
+ if (result) {
+ pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+ *virq = NO_IRQ;
+ return result;
+ }
+
+ *virq = irq_create_mapping(NULL, outlet);
+
+ pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, outlet,
+ *virq);
+
+ return 0;
+}
+
+int ps3pf_free_event_irq(unsigned int virq)
+{
+ int result;
+
+ pr_debug(" -> %s:%d\n", __func__, __LINE__);
+
+ result = lv1_destruct_event_receive_port(virq_to_hw(virq));
+
+ if (result)
+ pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+
+ irq_dispose_mapping(virq);
+
+ pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ return result;
+}
+
+int ps3pf_send_event_locally(unsigned int virq)
+{
+ return lv1_send_event_locally(virq_to_hw(virq));
+}
+
+/**
+ * ps3pf_connect_event_irq - Assign a virq to a system bus device.
+ * @did: The HV device identifier read from the system repository.
+ * @interrupt_id: The device interrupt id read from the system repository.
+ * @virq: The assigned Linux virq.
+ *
+ * An event irq represents a virtual device interrupt. The interrupt_id
+ * coresponds to the software interrupt number.
+ */
+
+int ps3pf_connect_event_irq(const struct ps3pf_device_id *did,
+ unsigned int interrupt_id, unsigned int *virq)
+{
+ int result;
+
+ result = ps3pf_alloc_event_irq(virq);
+
+ if (result)
+ return result;
+
+ result = lv1_connect_interrupt_event_receive_port(did->bus_id,
+ did->dev_id, virq_to_hw(*virq), interrupt_id);
+
+ if (result) {
+ pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
+ " failed: %s\n", __func__, __LINE__,
+ ps3pf_result(result));
+ ps3pf_free_event_irq(*virq);
+ *virq = NO_IRQ;
+ return result;
+ }
+
+ pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+ interrupt_id, *virq);
+
+ return 0;
+}
+
+int ps3pf_disconnect_event_irq(const struct ps3pf_device_id *did,
+ unsigned int interrupt_id, unsigned int virq)
+{
+ int result;
+
+ pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+ interrupt_id, virq);
+
+ result = lv1_disconnect_interrupt_event_receive_port(did->bus_id,
+ did->dev_id, virq_to_hw(virq), interrupt_id);
+
+ if (result)
+ pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
+ " failed: %s\n", __func__, __LINE__,
+ ps3pf_result(result));
+
+ ps3pf_free_event_irq(virq);
+
+ pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ return result;
+}
+
+/**
+ * ps3pf_alloc_vuart_irq - Configure the system virtual uart virq.
+ * @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap.
+ * @virq: The assigned Linux virq.
+ *
+ * The system supports only a single virtual uart, so multiple calls without
+ * freeing the interrupt will return a wrong state error.
+ */
+
+int ps3pf_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq)
+{
+ int result;
+ unsigned long outlet;
+ unsigned long lpar_addr;
+
+ BUG_ON(!is_kernel_addr((unsigned long)virt_addr_bmp));
+
+ lpar_addr = ps3pf_mm_phys_to_lpar(__pa(virt_addr_bmp));
+
+ result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
+
+ if (result) {
+ pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+ return result;
+ }
+
+ *virq = irq_create_mapping(NULL, outlet);
+
+ pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__,
+ outlet, *virq);
+
+ return 0;
+}
+
+int ps3pf_free_vuart_irq(unsigned int virq)
+{
+ int result;
+
+ result = lv1_deconfigure_virtual_uart_irq();
+
+ if (result) {
+ pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+ return result;
+ }
+
+ irq_dispose_mapping(virq);
+
+ return result;
+}
+
+/**
+ * ps3pf_alloc_spe_irq - Configure an spe virq.
+ * @spe_id: The spe_id returned from lv1_construct_logical_spe().
+ * @class: The spe interrupt class {0,1,2}.
+ * @virq: The assigned Linux virq.
+ *
+ */
+
+int ps3pf_alloc_spe_irq(unsigned long spe_id, unsigned int class,
+ unsigned int *virq)
+{
+ int result;
+ unsigned long outlet;
+
+ BUG_ON(class > 2);
+
+ result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
+
+ if (result) {
+ pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
+ __func__, __LINE__, ps3pf_result(result));
+ return result;
+ }
+
+ *virq = irq_create_mapping(NULL, outlet);
+
+ pr_debug("%s:%d: spe_id %lu, class %u, outlet %lu, virq %u\n",
+ __func__, __LINE__, spe_id, class, outlet, *virq);
+
+ return 0;
+}
+
+int ps3pf_free_spe_irq(unsigned int virq)
+{
+ irq_dispose_mapping(virq);
+ return 0;
+}
+
+#define PS3PF_INVALID_OUTLET ((irq_hw_number_t)-1)
+#define PS3PF_PLUG_MAX 63
+
+/**
+ * struct bmp - a per cpu irq status and mask bitmap structure
+ * @status: 256 bit status bitmap indexed by plug
+ * @unused_1:
+ * @mask: 256 bit mask bitmap indexed by plug
+ * @unused_2:
+ * @lock:
+ * @ipi_debug_brk_mask:
+ *
+ * The HV mantains per SMT thread mappings of HV outlet to HV plug on
+ * behalf of the guest. These mappings are implemented as 256 bit guest
+ * supplied bitmaps indexed by plug number. The address of the bitmaps are
+ * registered with the HV through lv1_configure_irq_state_bitmap().
+ *
+ * The HV supports 256 plugs per thread, assigned as {0..255}, for a total
+ * of 512 plugs supported on a processor. To simplify the logic this
+ * implementation equates HV plug value to linux virq value, constrains each
+ * interrupt to have a system wide unique plug number, and limits the range
+ * of the plug values to map into the first dword of the bitmaps. This
+ * gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
+ * that there is no constraint on how many in this set an individual thread
+ * can aquire.
+ */
+
+struct bmp {
+ struct {
+ unsigned long status;
+ unsigned long unused_1[3];
+ unsigned long mask;
+ unsigned long unused_2[3];
+ } __attribute__ ((packed));
+ spinlock_t lock;
+ unsigned long ipi_debug_brk_mask;
+};
+
+/**
+ * struct private - a per cpu data structure
+ * @node: HV node id
+ * @cpu: HV thread id
+ * @bmp: an HV bmp structure
+ */
+
+struct private {
+ unsigned long node;
+ unsigned int cpu;
+ struct bmp bmp;
+};
+
+#if defined(DEBUG)
+static void _dump_64_bmp(const char *header, const unsigned long *p, unsigned cpu,
+ const char* func, int line)
+{
+ pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
+ func, line, header, cpu,
+ *p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
+ *p & 0xffff);
+}
+
+static void _dump_256_bmp(const char *header, const unsigned long *p, unsigned cpu,
+ const char* func, int line)
+{
+ pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
+ func, line, header, cpu, p[0], p[1], p[2], p[3]);
+}
+
+#define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__)
+static void _dump_bmp(struct private* pd, const char* func, int line)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pd->bmp.lock, flags);
+ _dump_64_bmp("stat", &pd->bmp.status, pd->cpu, func, line);
+ _dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line);
+ spin_unlock_irqrestore(&pd->bmp.lock, flags);
+}
+
+#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
+static void _dump_mask(struct private* pd, const char* func, int line)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pd->bmp.lock, flags);
+ _dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line);
+ spin_unlock_irqrestore(&pd->bmp.lock, flags);
+}
+#else
+static void dump_bmp(struct private* pd) {};
+static void dump_mask(struct private* pd) {};
+#endif /* defined(DEBUG) */
+
+static void chip_mask(unsigned int virq)
+{
+ unsigned long flags;
+ struct private *pd = get_irq_chip_data(virq);
+
+ pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq);
+
+ BUG_ON(virq < NUM_ISA_INTERRUPTS);
+ BUG_ON(virq > PS3PF_PLUG_MAX);
+
+ spin_lock_irqsave(&pd->bmp.lock, flags);
+ pd->bmp.mask &= ~(0x8000000000000000UL >> virq);
+ spin_unlock_irqrestore(&pd->bmp.lock, flags);
+
+ lv1_did_update_interrupt_mask(pd->node, pd->cpu);
+}
+
+static void chip_unmask(unsigned int virq)
+{
+ unsigned long flags;
+ struct private *pd = get_irq_chip_data(virq);
+
+ pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq);
+
+ BUG_ON(virq < NUM_ISA_INTERRUPTS);
+ BUG_ON(virq > PS3PF_PLUG_MAX);
+
+ spin_lock_irqsave(&pd->bmp.lock, flags);
+ pd->bmp.mask |= (0x8000000000000000UL >> virq);
+ spin_unlock_irqrestore(&pd->bmp.lock, flags);
+
+ lv1_did_update_interrupt_mask(pd->node, pd->cpu);
+}
+
+static void chip_eoi(unsigned int virq)
+{
+ lv1_end_of_interrupt(virq);
+}
+
+static struct irq_chip irq_chip = {
+ .name = "ps3pf",
+ .mask = chip_mask,
+ .unmask = chip_unmask,
+ .eoi = chip_eoi,
+};
+
+static void host_unmap(struct irq_host *h, unsigned int virq)
+{
+ int result;
+
+ pr_debug("%s:%d: virq %d\n", __func__, __LINE__, virq);
+
+ lv1_disconnect_irq_plug(virq);
+
+ result = set_irq_chip_data(virq, NULL);
+ BUG_ON(result);
+}
+
+static DEFINE_PER_CPU(struct private, private);
+
+static int host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ int result;
+ unsigned int cpu;
+
+ pr_debug(" -> %s:%d\n", __func__, __LINE__);
+ pr_debug("%s:%d: hwirq %lu => virq %u\n", __func__, __LINE__, hwirq,
+ virq);
+
+ /* bind this virq to a cpu */
+
+ preempt_disable();
+ cpu = smp_processor_id();
+ result = lv1_connect_irq_plug(virq, hwirq);
+ preempt_enable();
+
+ if (result) {
+ pr_info("%s:%d: lv1_connect_irq_plug failed:"
+ " %s\n", __func__, __LINE__, ps3pf_result(result));
+ return -EPERM;
+ }
+
+ result = set_irq_chip_data(virq, &per_cpu(private, cpu));
+ BUG_ON(result);
+
+ set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq);
+
+ pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ return result;
+}
+
+static struct irq_host_ops host_ops = {
+ .map = host_map,
+ .unmap = host_unmap,
+};
+
+void __init ps3pf_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
+{
+ struct private *pd = &per_cpu(private, cpu);
+
+ pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
+
+ pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+ cpu, virq, pd->bmp.ipi_debug_brk_mask);
+}
+
+static int bmp_get_and_clear_status_bit(struct bmp *m)
+{
+ unsigned long flags;
+ unsigned int bit;
+ unsigned long x;
+
+ spin_lock_irqsave(&m->lock, flags);
+
+ /* check for ipi break first to stop this cpu ASAP */
+
+ if (m->status & m->ipi_debug_brk_mask) {
+ m->status &= ~m->ipi_debug_brk_mask;
+ spin_unlock_irqrestore(&m->lock, flags);
+ return __ilog2(m->ipi_debug_brk_mask);
+ }
+
+ x = (m->status & m->mask);
+
+ for (bit = NUM_ISA_INTERRUPTS, x <<= bit; x; bit++, x <<= 1)
+ if (x & 0x8000000000000000UL) {
+ m->status &= ~(0x8000000000000000UL >> bit);
+ spin_unlock_irqrestore(&m->lock, flags);
+ return bit;
+ }
+
+ spin_unlock_irqrestore(&m->lock, flags);
+
+ pr_debug("%s:%d: not found\n", __func__, __LINE__);
+ return -1;
+}
+
+unsigned int ps3pf_get_irq(void)
+{
+ int plug;
+
+ struct private *pd = &__get_cpu_var(private);
+
+ plug = bmp_get_and_clear_status_bit(&pd->bmp);
+
+ if (plug < 1) {
+ pr_debug("%s:%d: no plug found: cpu %u\n", __func__, __LINE__,
+ pd->cpu);
+ dump_bmp(&per_cpu(private, 0));
+ dump_bmp(&per_cpu(private, 1));
+ return NO_IRQ;
+ }
+
+#if defined(DEBUG)
+ if (plug < NUM_ISA_INTERRUPTS || plug > PS3PF_PLUG_MAX) {
+ pr_debug("%s:%d: bad plug number: %u \n", __func__, __LINE__,
+ plug);
+ dump_bmp(&per_cpu(private, 0));
+ dump_bmp(&per_cpu(private, 1));
+ BUG();
+ }
+#endif
+ return plug;
+}
+
+void __init ps3pf_init_IRQ(void)
+{
+ int result;
+ unsigned long node;
+ unsigned cpu;
+ struct irq_host *host;
+
+ lv1_get_logical_ppe_id(&node);
+
+ host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &host_ops,
+ PS3PF_INVALID_OUTLET);
+ irq_set_default_host(host);
+ irq_set_virq_count(PS3PF_PLUG_MAX + 1);
+
+ for_each_possible_cpu(cpu) {
+ struct private *pd = &per_cpu(private, cpu);
+
+ pd->node = node;
+ pd->cpu = cpu;
+ spin_lock_init(&pd->bmp.lock);
+
+ result = lv1_configure_irq_state_bitmap(node, cpu,
+ ps3pf_mm_phys_to_lpar(__pa(&pd->bmp.status)));
+
+ if (result)
+ pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
+ " %s\n", __func__, __LINE__,
+ ps3pf_result(result));
+ }
+
+ ppc_md.get_irq = ps3pf_get_irq;
+}
next reply other threads:[~2006-11-10 20:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-10 20:03 Geoff Levand [this message]
2006-11-13 6:23 ` [PATCH 12/16] powerpc: add ps3 platform interrupt support Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4554DB08.6050804@am.sony.com \
--to=geoffrey.levand@am.sony.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.