From mboxrd@z Thu Jan  1 00:00:00 1970
From: Patrick McHardy <kaber@trash.net>
Date: Sat, 11 Nov 2006 13:53:14 +0000
Subject: Re: [LARTC] Errors with GRED after upgrading to 2.6.18 kernel
Message-Id: <4555D5CA.7070006@trash.net>
List-Id: <lartc.vger.kernel.org>
References: <0E24ED2A7F9AA349A8633E6A56A64BE0027A80FB@XCH-SW-2V1.sw.nos.boeing.com>
In-Reply-To: <0E24ED2A7F9AA349A8633E6A56A64BE0027A80FB@XCH-SW-2V1.sw.nos.boeing.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

Flechsenhaar, Jon J wrote:
> $TC qdisc add dev $EDEV parent 2:20 gred setup DPs 3 default 2 grio

> after each DP 3 on each gred.
>=20
> This starting happening after I upgraded to 2.6.18 from 2.4.20 kernel.
> Anyone have any ideas?=C2=B4

I think DPs start at zero, so you have 0, 1 and 2. 3 is out of bounds
and is reported as an error in current kernel.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc