Re: [Xenomai-help] xeno_rtcan_mem.ko, what are it's parameters?

[Jan Kiszka <jan.kiszka@domain.hid>]

[-- Attachment #1: Type: text/plain, Size: 948 bytes --]

Frits de Klark wrote:
> Hello everyone,
> 
> I finally got my PCI CAN card today. It's an Advantech 1680 and
> provides, as
> far as I'm informed, a memory mapped SJA1000 controller.
> I´m trying to load the xeno_rtcan_mem module now, but I'm not sure what
> parameters I should pass. More specific: What value(s) should I give to the
> 'mem' parameter? Is this an I/O address I found in /proc/pci under the 1680
> device?

I'm not sure that this will work, but you can give it a try in any case.
Do you have a reference driver for that board? Or some manual describing
the mapping of the SJA1000 into the PCI address space?

AFAIK, Wolfgang is working on a generic SJA1000 PCI driver. So far we
only have a driver for the PEAK PCI adapter, but that one is going to be
generalised. So you could become a first-grade test candidate for
another piece of hardware supported by that driver. :)

Wolfgang, what the status?

Jan


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]