Re: [Xenomai-help] System freezes with Xenomai 2.2.5 and kernel 2.6.17

[Jan Kiszka <jan.kiszka@domain.hid>]

[-- Attachment #1: Type: text/plain, Size: 1474 bytes --]

karre@domain.hid wrote:
> Hi,
> 
> I tried to install a real time system using Suse Linux 10.1 with a Vanilla-Kernel 2.6.17 and Xenomai 2.2.5.
> 
> There were no error messages except "Cannot determine dependencies of module reiserfs", though the system was bootable and actually had access to reiserfs-partitions.
> 
> Another suspicious fact was numberous "nothing to do"-messages during compilation of Xenomai.

User-space part, I guess. Likely you already built it, no?

> 
> Now the system is bootable and Xenomai reported that hal&x86, real-time nucleus, nataive API, POSIX and RDTM services had started. Unfortunately, the system freezes unrecoverably shortly after login.

.config, please. I'm running such a setup (SuSE 10.1, 2.6.17.14, latest
Xenomai) successfully on my notebook.

Please make sure, that your build is really consistent. When in doubt,
try a "make clean; make; make modules_install install" cycle and check
if it helps. Could you have accidentally mixed up modules from some
non-Xenomai 2.6.17-build with the Xenomai-enabled version?

> 
> Can this be cause of I couldn't include "Interrupt pipeline" into the kernel? There was no way to elect it in menuconfig, there was --- instead of [ ], [*] or [M] beneath this option.

The "---" means that you cannot disable this essential feature, it will
be forcibly compiled-in when you enable Xenomai.

> 
> Thank you in advance for any advice!
> 
> Richard
> 

Jan


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]