From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?S=E9bastien_CRAMATTE?= Date: Mon, 11 Dec 2006 03:34:06 +0000 Subject: Re: [MAYBE RESOLVED?] [LARTC] QOS, Bridge and IMQ ? Message-Id: <457CD1AE.9010300@wanadoo.fr> MIME-Version: 1 Content-Type: multipart/mixed; boundary="------------000902060108070102060508" List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. --------------000902060108070102060508 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Well I've read that with 2.6 I can use physdev : iptables -t mangle -A POSTROUTING -o br0 -m physdev --physdev-out eth0 -j OUT and surely this should work ? isn't it ? iptables -t mangle -A POSTROUTING -i br0 -m physdev --physdev-in eth1 -j IMQ --todev 0 regards S=E9bastien CRAMATTE a =E9crit : > Hello > > I try to setup QOS into bridge context. But this not very clear for me > So assuming that : > eth1 =3D LAN > eth0 =3D INTERNET > > br0 Link encap:Ethernet HWaddr 00:30:48:87:99:28 > inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx=20 > Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:5697373 errors:0 dropped:0 overruns:0 frame:0 > TX packets:164166 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:320113723 (305.2 MiB) TX bytes:35162676 (33.5 MiB) > > eth0 Link encap:Ethernet HWaddr 00:30:48:87:99:28 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:12797225 errors:0 dropped:0 overruns:0 frame:0 > TX packets:164149 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:1045689736 (997.2 MiB) TX bytes:35893643 (34.2 MiB) > Base address:0xc000 Memory:f2000000-f2020000 > > eth1 Link encap:Ethernet HWaddr 00:30:48:87:99:29 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Base address:0xd100 Memory:f1000000-f1020000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:20 errors:0 dropped:0 overruns:0 frame:0 > TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:1480 (1.4 KiB) TX bytes:1480 (1.4 KiB) > > I'm seen somewhere that eth0, eth1 should be set in promisc mode and > that the network script to this for me ... > Bun in fact, I'm not sure that my eth0 and eth1 are in promisc mode ... > > For the outgoing I've made an iptables user table to redirect outbound > traffic > If I put eth0 instead of br0 as outgoing interface the traffic is not > shapped ??? > > iptables -t mangle -N OUT > iptables -t mangle -A POSTROUTING -j LOG > iptables -t mangle -A POSTROUTING -o br0 -j OUT > > In my log I've got this ... > > Dec 11 04:07:02 gestor1 kernel: IN=3D OUT=3Dbr0 SRC=3Dxxx.xxx.xxx.xxx > DST=3Dxxx.xxx.xxx.xxx > > Logically, due to the same problem I can't do something like this to > shape the inboud traffic : > > #ip link set imq0 up > #iptables -t mangle -A POSTROUTING -o eth1 -j IMQ --todev 0 > > Regards > > Thanks for your help > > =20 > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > =20 --=20 ZEN SOLUCIONES - Be in XForms take your "Concentr=E9" S=E9bastien CRAMATTE =20 C/ Alfonso X el Sabio, 29 30565 Las Torres de Cotillas (Murcia) ESPA=D1A Mobile : +34 627 66 52 83 E-mail : scramatte@zensoluciones.com Site : www.zensoluciones.com Skype : scramatte Msn : scramatte@hotmail.com Jabber: scramatte@jabber.org VoIP: +33 1 7090 3413=20 -- CONCENTR=C9 xml entreprise grade framework http://concentre.zensoluciones.com -- This e-mail is privileged and may contain confidential information intended= only for the person(s) named above. If you receive this e-mail in error, p= lease notify the sender immediately and delete it. E-mail and internet tran= smissions can't be warrant privacy, integrity or correct reception. The sen= der will not be liable for any damages resulting.=20 Este mensaje va dirigido, de manera exclusiva, a su destinatario y puede co= ntener informaciones confidential. En caso de haber recibido este mensaje p= or error, informe al emisor imediadamente y proceda a su eliminaci=F3n. El = correo electr=F3nico y las comunicaciones por medio de Internet no permiten= garantizar la confidencialidad de los mensajes transmitidos, as=ED como ta= mpoco su integridad o su correcta recepci=F3n. El emisor no asume responsab= ilidad alguna por tales circunstancias. Ce message est destin=E9 exclusivement =E0 son destinataire et peut conteni= r des informations confidentielles. En cas de r=E9ception d'un tel message = par erreur, informez l'exp=E9diteur imm=E9diatement et proc=E9dez =E0 son e= ffacement. Il n'est pas possible de garantir la confidentialit=E9, l'int=E9= grit=E9 ou la r=E9ception correcte du courrier =E9lectronique ainsi que des= communications par internet. L'exp=E9diteur ne peut =EAtre tenu pour respo= nsable d'=E9ventuels dommages commis. --------------000902060108070102060508 Content-Type: text/x-vcard; charset=utf-8; name="s.cramatte.vcf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="s.cramatte.vcf" begin:vcard fn;quoted-printable:S=C3=A9bastien CRAMATTE n;quoted-printable:CRAMATTE;S=C3=A9bastien org:ZEN Soluciones;IT technologies, Linux and Web adr;quoted-printable:Piso 4b;;Calle Alfonso X el Sabio, 29;Las torres de cotillas;Murcia;30565;Espa=C3=B1a email;internet:scramatte@zensoluciones.com title:Consultant tel;work:+34 968 292 965 tel;cell:+34 627 665 283 x-mozilla-html:FALSE url:http://www.zensoluciones.com version:2.1 end:vcard --------------000902060108070102060508 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc --------------000902060108070102060508--