From: Joakim Crafack <joakim@crafack.dk>
To: linux-ide@vger.kernel.org
Subject: ata_piix: Quick question
Date: Tue, 19 Dec 2006 13:37:28 +0100 [thread overview]
Message-ID: <4587DD08.70404@crafack.dk> (raw)
Hi all.
Some time ago, I reported bug# 7170, as my ICH6 controller failed to
detect my disks after kernel upgrade.
I tested the 2.6.20-rc1 kernel yesterday, and now the controller reports:
[ 21.506369] ICH6: IDE controller at PCI slot 0000:00:1f.1
[ 21.506420] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 18
[ 21.506518] ICH6: chipset revision 3
[ 21.506565] ICH6: not 100% native mode: will probe irqs later
[ 21.506622] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
[ 22.177871] hda: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive
[ 22.789485] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 23.302937] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 23.303232] Uniform CD-ROM driver Revision: 3.20
[ 23.305545] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 23.305787] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 19
[ 23.305927] ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB082 bmdma
0xA880 irq 19
[ 23.306001] ata2: SATA max UDMA/133 cmd 0xB000 ctl 0xAC02 bmdma
0xA888 irq 19
[ 23.306056] scsi0 : ata_piix
[ 23.466877] ATA: abnormal status 0xD0 on port 0xB407
[ 23.466932] scsi1 : ata_piix
[ 23.627759] ATA: abnormal status 0x7F on port 0xB007
[...]
[ 23.990751] VFS: Cannot open root device "sda3" or unknown-block(0,0)
[ 23.990798] Please append a correct "root=" boot option
[ 23.990848] Kernel panic - not syncing: VFS: Unable to mount root fs
on unknown-block(0,0)
The disk is attatched to ata1, ata2 is not connected.
Is there something wrong here, or has the disk "just" been renamed ???
Regards
Joakim Crafack
reply other threads:[~2006-12-19 12:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4587DD08.70404@crafack.dk \
--to=joakim@crafack.dk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.