From mboxrd@z Thu Jan 1 00:00:00 1970 From: Edwin.van.Opstal@SE-Technology.com (Edwin van Opstal) Date: Thu, 19 May 2005 06:24:01 +0000 Subject: lm80 settings Message-Id: <45898.192.168.0.1.1056436807.squirrel@server.setech> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi all, I have installed the lm_sensors package for temperature monitoring of my ABIT KG7 mainboard, but when I ran "sensors" I got bogus output (see attached text). I looked into the /etc/sensors.conf file which suggested I contact you for LM80 settings. How can I find these out myself or do you happen to have the necessary settings from another user? Thanks for your time. Best regards, Edwin -- Edwin van Opstal S.E. Technology -------------- next part -------------- lm80-i2c-0-2d Adapter: SMBus Via Pro adapter at 5000 Algorithm: Non-I2C SMBus adapter +5V: +4.03 V (min = +4.50 V, max = +3.00 V) ALARM VTT: +1.85 V (min = +1.71 V, max = +2.09 V) ALARM +3.3V: +2.55 V (min = +2.97 V, max = +3.63 V) ALARM +Vcore: +3.26 V (min = +2.52 V, max = +3.08 V) ALARM +12V: +13.64 V (min = +10.80 V, max = +13.20 V) ALARM -12V: -7.09 V (min = -8.68 V, max = -6.60 V) -5V: -2.70 V (min = -3.44 V, max = -2.22 V) ALARM fan1: 10546 RPM (min = 6000 RPM, div = 1) fan2: 5465 RPM (min = 6000 RPM, div = 1) temp: -128.00 ?C (hot:limit = +6?C, hysteresis = +5?C) ALARM (os: limit = +6?C, hysteresis = +5?C) ALARM alarms: Board temperature input (LM75) ALARM eeprom-i2c-0-52 Adapter: SMBus Via Pro adapter at 5000 Algorithm: Non-I2C SMBus adapter Memory type: DDR SDRAM DIMM SPD SDRAM Size (MB): 256 eeprom-i2c-0-53 Adapter: SMBus Via Pro adapter at 5000 Algorithm: Non-I2C SMBus adapter Memory type: DDR SDRAM DIMM SPD SDRAM Size (MB): 256