From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <45ABA9FC.7070606@domain.hid> Date: Mon, 15 Jan 2007 17:21:16 +0100 From: Steven Scholz MIME-Version: 1.0 Subject: Re: [Xenomai-core] IPIPE for ARM9 i.MX and AT91RM9200 ? References: <45AB9D58.3060308@domain.hid> <45ABA0C7.3050407@domain.hid> <45ABA6E4.3030707@domain.hid> <45ABA91F.909@domain.hid> In-Reply-To: <45ABA91F.909@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit List-Id: "Xenomai life and development \(bug reports, patches, discussions\)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: xenomai@xenomai.org Gilles, >>>> are there IPIPE Patches for recent kernels (2.6.19) available for >>>> Freescale's i.MX1/i.MXL and Atmel's AT91RM9200 cpus available. >>> The IPIPE patches for ARM exist for linux 2.6.14 and 2.6.15. There is an >>> i.MX21 port for 2.6.14 and an AT91 port for 2.6.15... >> >> Thanks very much. >> >> Where can I find the AT91 patches? The i.MX stuff seems to be in xenomai-2.3.0. > > Yes, the AT91 port should be in the next release of the 2.3 branch. > > In the meantime, you can find them in Xenomai svn repository, either > under trunk/ksrc/arc/arm/patches/at91 or > branches/v2.3.x/ksrc/arch/arm/patches/at91. Ok. Thanks. IIUC then 2.6.15 was before the introduction of the generic irq layer. So would these make it easier to port to a newer kernel? Or harder? Steven