From: Nishanth Menon <menon.nishanth@gmail.com>
To: Ram <vshrirama@gmail.com>
Cc: linux-omap-open-source@linux.omap.com
Subject: Re: 2430 linux does not boot in nand
Date: Thu, 18 Jan 2007 21:29:09 -0600 [thread overview]
Message-ID: <45B03B05.5000202@gmail.com> (raw)
In-Reply-To: <8bf247760701180640g1886b5edu4cadbeb2a4a2f7c2@mail.gmail.com>
Ram stated on 1/18/2007 8:40 AM:
> Hi,
> Im using Linux 2.6.14-omap-2430ONLY linux which i downloaded for
> linux.omap.com, i have also tried linux-2.6.16omap2430.tgz also.
>
> Im using a TI 2430 SDP board.
>
which version? V4.0 or above?
> I dont understand why the same kernel with the same bootargs boots
> in NOR, but not in NAND.
>
u have other variables such as a bootloader...
> All i get is --
>
> OMAP243X SDP # bootm
> ## Booting image at 80000000 ...
> Image Name: Linux Kernel Image
> Image Type: ARM Linux Kernel Image (gzip compressed)
> Data Size: 1404634 Bytes = 1.3 MB
> Load Address: 80c08000
> Entry Point: 80c08000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
>
ok so u booted just fine.. u reached the uboot prompt, which is good..
> Starting kernel ...
>
> Uncompressing
> Linux..............................................................................................
>
> done, booting the kernel.
Now, u need to go back and check ur bootargs. in general that is the
culprit.. or u got some bad uboot/x-loader in ur board that did not some
clock setting proper or got some dip switch messed up .. am just
guessing here..
>
> Should i need to enable a few options in make menuconfig for nand
> booting?
none that i have heard of :)
Regards,
NM
next prev parent reply other threads:[~2007-01-19 3:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-18 14:40 2430 linux does not boot in nand Ram
2007-01-19 3:29 ` Nishanth Menon [this message]
2007-01-19 3:29 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45B03B05.5000202@gmail.com \
--to=menon.nishanth@gmail.com \
--cc=linux-omap-open-source@linux.omap.com \
--cc=vshrirama@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.