From: Timur Tabi <timur@freescale.com>
To: Benjamin Zores <benjamin.zores@alcatel-lucent.fr>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: [MPC8349ITX] USB Init with PPC arch
Date: Tue, 23 Jan 2007 10:32:53 -0600 [thread overview]
Message-ID: <45B638B5.70901@freescale.com> (raw)
In-Reply-To: <20070122181027.89187533.benjamin.zores@alcatel-lucent.fr>
Benjamin Zores wrote:
> Hi,
>
> This question is mainly intended to Freescale's MPC8349ITX board maintainer
> but the issue/resolution is probably the same for other boards.
I'm the maintainer, although I don't think I can help you with this specific
problem.
> I'm trying to boot the MPC8349ITX card with Linux 2.6.19 using old PPC
> architecture (and not the new PowerPC one).
> I've ported patches from Freescale's BSP from 2.6.13 to 2.6.19 and
> it works pretty well but USB doesn't init properly.
>
> Switching to PowerPC arch of course works fine and USB is well inited
> but due to other feature i use that only exist on PPC right now, I can't
> make use of it.
What feature is that? I would think it would be easier to port that feature to
the powerpc architecture, then it would be to port ITX support to the ppc
architecture.
--
Timur Tabi
Linux Kernel Developer @ Freescale
prev parent reply other threads:[~2007-01-23 16:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-22 17:10 [MPC8349ITX] USB Init with PPC arch Benjamin Zores
2007-01-22 22:19 ` Kumar Gala
2007-01-23 8:18 ` Benjamin Zores
2007-01-23 16:18 ` Kumar Gala
2007-01-24 9:53 ` Benjamin Zores
2007-01-24 12:56 ` Benjamin Zores
2007-01-23 16:32 ` Timur Tabi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45B638B5.70901@freescale.com \
--to=timur@freescale.com \
--cc=benjamin.zores@alcatel-lucent.fr \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.