From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <45BDCE90.5070906@st.com> Date: Mon, 29 Jan 2007 16:08:08 +0530 From: Mayank BATRA MIME-Version: 1.0 To: BlueZ development References: <45B5AD79.8020104@st.com> <1169573111.5861.12.camel@violet> In-Reply-To: <1169573111.5861.12.camel@violet> Subject: Re: [Bluez-devel] hcidump EDR packet type Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi Marcel, > actually it is totally wrong. Sending the 3-DH5 bit only means that you > wanna enable DM1 and all EDR packets except 3-DH5, because setting that > bit means you disable that packet type. The corresponding response > should be DM1 + 3-DH5 bit set. > > Since this is custom firmware, it is interpreting the bitmask of the > change connection packet type in the wrong way. > > And to be clear on this, I don't care about the packet mask at all and > nobody should mess with it (except for testing). Let the link manager > decide which packet type to use. BlueZ can't make any intelligent > decision on which is the best packet type. It doesn't know anything > about the piconet it is using besides its handle. OK. But my question is why display different packet lists in the command and event? < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 handle 1 ptype 0x2000 Packet type: 3-DH5 ... > HCI Event: Connection Packet Type Changed (0x1d) plen 5 status 0x00 handle 1 ptype 0x1306 Packet type: 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3 Both of them should show the same packet list. Isn't it? Best Regards, Mayank ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel