From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hampton Maxwell Date: Mon, 29 Jan 2007 22:41:48 +0000 Subject: Re: [LARTC] Rewriting output interface Message-Id: <45BE782C.7090405@digitalpath.net> List-Id: References: <45BE71C1.2090206@digitalpath.net> In-Reply-To: <45BE71C1.2090206@digitalpath.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org We are using a madwifi type driver that supports wds. I just don't know how to setup the dual-bonded part of it. If someone has experience doing this with an ethernet only setup, I can adapt that to our network. Cheers, Hampton Stephen Hemminger wrote: > On Mon, 29 Jan 2007 14:14:25 -0800 > Hampton Maxwell wrote: > >> I would like to setup some rules for a wireless bridge to do load balancing. >> I'd like to dedicate one radio for doing transmit and one for receive. >> > > For most cases wireless bridge with Linux won't work. Unless you (one of the following): > * have special device firmware > * bridge only one client (ie point-to-point) > * use MAC layer NAT > * use experimental WDS and have device that supports it. > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc