From mboxrd@z Thu Jan 1 00:00:00 1970 From: Timo Benk Subject: Traffic Shaping: Ingress qdisc not working in Dom0 (3.0.4-1) Date: Sun, 04 Feb 2007 14:32:59 +0100 Message-ID: <45C5E08B.3090202@gmx.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org Hello, i noticed that the ingress qdisc is not working properly anymore in 3.0.4-1 (back in 3.0.2 the ingress qdisc was working for me): Install the ingress qdisc to peth0: # tc add qdisc dev peth0 ingress ... generate some traffic ... # tc -s qdisc show dev peth0 qdisc pfifo_fast 0: bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 324884 bytes 1749 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 qdisc ingress ffff: ---------------- Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) ^^^^^^^^^^^^^^^^^^^ rate 0bit 0pps backlog 0b 0p requeues 0 The ingress qdisc on peth0 gets no traffic somehow. If i stop the bridge via 'network-bridge stop', the ingress qdisc works as expected. But as far as the bridge is created, the ingress qdisc stops working on peth0. Greetings, -timo -- Timo Benk - Jabber ID: fry@downtempo.de - ICQ ID: #414944731 PGP Public Key: http://m28s01.vlinux.de/timo_benk_gpg_key.asc