That took care of it. 

Thanks much!

 

-Dwight

>>> On 2/2/2007 at 8:25 AM, in message <1170433559.18411.9.camel@beethoven.hq.office.ziprealty.com>, Michael Davis<mdavis@ziprealty.com> wrote:

I just ran into this problem.  After trying a whole bunch of things
(including importing/exporting) that didn't work, it turns out that all
it took was adding the ahci driver to the initrd image (mkinitrd
--preload ahci).

  Michael




On Fri, 2007-02-02 at 07:43 -0800, Dwight Morgan wrote:
> HTML document attachment (Text.htm)
> I am running LVM on FC6 2.6.19 and would like to switch over from
> Legacy/IDE in the intel 965 bios to AHCI/SATA.  Of course, as soon as
> I change the bios setting fedora won't boot as it can't find any
> volumes.  I can see how to export the LVM settings, change the text
> file from hda1 to sda1, and restore it.  But I figure the odds of me
> screwing this up are good, and I don't see a good recovery method.
> 
> Any help on process/recovery?
> 
> Thanks,
> -Dwight
> 
> PS.  Same drive, nothing changing other than a bios setting.
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/