From: Li Yang <leoli@freescale.com>
To: Paul <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 2/3] add platform_device for USB DR pheripheral driver
Date: Wed, 07 Feb 2007 13:49:24 +0800 [thread overview]
Message-ID: <45C96864.3040009@freescale.com> (raw)
Add platform_device setup code for OTG/peripheral mode of
834x DR module. It is needed for USB client driver to work.
Signed-off-by: Li Yang <leoli@freescale.com>
---
arch/powerpc/sysdev/fsl_soc.c | 76 +++++++++++++++++++++++++++++++----------
1 files changed, 58 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ad31e56..357cac3 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -440,7 +440,8 @@ static int __init fsl_usb_of_init(void)
{
struct device_node *np;
unsigned int i;
- struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL;
+ struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
+ *usb_dev_dr_client = NULL;
int ret;
for (np = NULL, i = 0;
@@ -506,33 +507,72 @@ static int __init fsl_usb_of_init(void)
of_irq_to_resource(np, 0, &r[1]);
- usb_dev_dr =
- platform_device_register_simple("fsl-ehci", i, r, 2);
- if (IS_ERR(usb_dev_dr)) {
- ret = PTR_ERR(usb_dev_dr);
+ prop = get_property(np, "dr_mode", NULL);
+
+ if (!prop || !strcmp(prop, "host")) {
+ usb_data.operating_mode = FSL_USB2_DR_HOST;
+ usb_dev_dr_host = platform_device_register_simple(
+ "fsl-ehci", i, r, 2);
+ if (IS_ERR(usb_dev_dr_host)) {
+ ret = PTR_ERR(usb_dev_dr_host);
+ goto err;
+ }
+ } else if (prop && !strcmp(prop, "peripheral")) {
+ usb_data.operating_mode = FSL_USB2_DR_DEVICE;
+ usb_dev_dr_client = platform_device_register_simple(
+ "fsl-usb2-udc", i, r, 2);
+ if (IS_ERR(usb_dev_dr_client)) {
+ ret = PTR_ERR(usb_dev_dr_client);
+ goto err;
+ }
+ } else if (prop && !strcmp(prop, "otg")) {
+ usb_data.operating_mode = FSL_USB2_DR_OTG;
+ usb_dev_dr_host = platform_device_register_simple(
+ "fsl-ehci", i, r, 2);
+ if (IS_ERR(usb_dev_dr_host)) {
+ ret = PTR_ERR(usb_dev_dr_host);
+ goto err;
+ }
+ usb_dev_dr_client = platform_device_register_simple(
+ "fsl-usb2-udc", i, r, 2);
+ if (IS_ERR(usb_dev_dr_client)) {
+ ret = PTR_ERR(usb_dev_dr_client);
+ goto err;
+ }
+ } else {
+ ret = -EINVAL;
goto err;
}
- usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL;
- usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask;
-
- usb_data.operating_mode = FSL_USB2_DR_HOST;
-
prop = get_property(np, "phy_type", NULL);
usb_data.phy_mode = determine_usb_phy(prop);
- ret =
- platform_device_add_data(usb_dev_dr, &usb_data,
- sizeof(struct
- fsl_usb2_platform_data));
- if (ret)
- goto unreg_dr;
+ if (usb_dev_dr_host) {
+ usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL;
+ usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host->
+ dev.coherent_dma_mask;
+ if ((ret = platform_device_add_data(usb_dev_dr_host,
+ &usb_data, sizeof(struct
+ fsl_usb2_platform_data))))
+ goto unreg_dr;
+ }
+ if (usb_dev_dr_client) {
+ usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL;
+ usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client->
+ dev.coherent_dma_mask;
+ if ((ret = platform_device_add_data(usb_dev_dr_client,
+ &usb_data, sizeof(struct
+ fsl_usb2_platform_data))))
+ goto unreg_dr;
+ }
}
return 0;
unreg_dr:
- if (usb_dev_dr)
- platform_device_unregister(usb_dev_dr);
+ if (usb_dev_dr_host)
+ platform_device_unregister(usb_dev_dr_host);
+ if (usb_dev_dr_client)
+ platform_device_unregister(usb_dev_dr_client);
unreg_mph:
if (usb_dev_mph)
platform_device_unregister(usb_dev_mph);
next reply other threads:[~2007-02-07 5:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-07 5:49 Li Yang [this message]
2007-02-08 6:47 ` [PATCH 2/3] add platform_device for USB DR pheripheral driver Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2007-02-06 9:05 Li Yang
2007-02-06 16:33 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45C96864.3040009@freescale.com \
--to=leoli@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.