From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Wed, 07 Feb 2007 18:05:11 +0000 (GMT) Received: from mx5.wp.pl ([212.77.101.9]:15005 "EHLO mx1.wp.pl") by ftp.linux-mips.org with ESMTP id S20039501AbXBGSFG (ORCPT ); Wed, 7 Feb 2007 18:05:06 +0000 Received: (wp-smtpd smtp.wp.pl 16732 invoked from network); 7 Feb 2007 19:03:59 +0100 Received: from apn-239-193.gprsbal.plusgsm.pl (HELO [87.251.239.193]) (laurentp@[87.251.239.193]) (envelope-sender ) by smtp.wp.pl (WP-SMTPD) with AES256-SHA encrypted SMTP for ; 7 Feb 2007 19:03:59 +0100 Message-ID: <45CA1552.3080100@wp.pl> Date: Wed, 07 Feb 2007 19:07:14 +0100 From: "W.P." User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.12) Gecko/20050920 X-Accept-Language: pl, en, en-us MIME-Version: 1.0 To: linux-mips@linux-mips.org Subject: Re: Advice needed. References: <45C0C956.2050009@wp.pl> <20916.201.240.249.124.1170279547.squirrel@www.amilda.org> <200701312302.05473.florian.fainelli@int-evry.fr> <45C11812.9050808@wp.pl> <10879.201.240.249.124.1170335347.squirrel@www.amilda.org> <45C1FE3D.8080304@wp.pl> <16445.201.240.249.124.1170423826.squirrel@www.amilda.org> <45C3BB23.2070309@wp.pl> <50812.201.230.45.190.1170482268.squirrel@www.amilda.org> <45C45DDA.1000805@wp.pl> <24895.201.240.249.124.1170686083.squirrel@www.amilda.org> In-Reply-To: <24895.201.240.249.124.1170686083.squirrel@www.amilda.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-WP-AV: skaner antywirusowy poczty Wirtualnej Polski S. A. X-WP-SPAM: NO 0000000 Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 13964 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: laurentp@wp.pl Precedence: bulk X-list: linux-mips >The configuration structure is difficult to understand (even if you have >the C header containing the struct) > > I don't have any header files for flash. Do you? In tarballs for BR, there is no source for utilities like flash. I'm trying to "decode" this structure, variable-by-variable. I have used your flash utility source >Just use the "flash" program. > > The one, that comes with original firmware? But what about webs, as i looked into, this needs too some knowledge of flash datastructures.? About webs -> will try to add some printf for debugging, and see. BTW, maybe the JP3 connector (just 12 little holes) is the JTAG. Will upload photo i think tomorrow. I have checked this with ohmometer and pin-map of 8186, and it seems to be JTAG + RESET+ something(?). You have published schema of JTAG cable, but what software shall anyone use? W.Piotrzkowski.