[U-Boot-Users] BDI2000 config for MPC8360rev2 with DDR2 memory?

[Steven Hein <ssh@sgi.com>]

Hi all--

I just received a new custom board with an MPC8360r2 with 128MB DDR2
memory on the board.    My 8360EMDS board has a rev 1.2 part with DDR,
so I know I need a different set of init registers in my BDI2000 config.
If anyone has a similar config and could send me a BDI2000 config file
for it, that would be AWESOME!     In the mean time, I'm trying to
flash u-boot directly into my flash part using the BDI2000 and let it
initialize my memory for me.    But this is all fairly uncharted
territory for me, so a BDI config would be helpful.

Thanks!
Steve

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Steve Hein (ssh at sgi.com)              Engineering Diagnostics/Software
Silicon Graphics, Inc.                          
1168 Industrial Blvd.                 Phone: (715) 726-8410
Chippewa Falls, WI 54729              Fax:   (715) 726-6715
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~