From: Daniel Smolik <marvin@mydatex.cz>
To: sparclinux@vger.kernel.org
Subject: compile kernel for SS5 on E450
Date: Sat, 10 Feb 2007 21:40:53 +0000 [thread overview]
Message-ID: <45CE3BE5.7090208@mydatex.cz> (raw)
Hi,
I get 2pcs. E450 and 2 pcs SS5. With some small problem I install Sarge
via netowork on this machines. But I would like to compile kernel for
SS5 on E450 (faster machine).
I do
sparc32 bash
make menuconfig; make
but on the end I get this:
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_analog from
.text
between 'bw2_do_default_mode' (at offset 0x1112a8) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_analog from
.text
between 'bw2_do_default_mode' (at offset 0x1112c0) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_76hz from .
text between
'bw2_do_default_mode' (at offset 0x111324) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_76hz from .
text between
'bw2_do_default_mode' (at offset 0x111334) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_66hz from .
text between
'bw2_do_default_mode' (at offset 0x111338) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_66hz from .
text between
'bw2_do_default_mode' (at offset 0x111340) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to .init.data:bw2regs_ecl
from .t
ext between 'bw2_do_default_mode'
(at offset 0x111348) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to .init.data:bw2regs_ecl
from .t
ext between 'bw2_do_default_mode'
(at offset 0x111350) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_1600 from .
text between
'bw2_do_default_mode' (at offset 0x11136c) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:bw2regs_1600 from .
text between
'bw2_do_default_mode' (at offset 0x111374) and 'bw2_init_one'
WARNING: vmlinux - Section mismatch: reference to
.init.data:__cg14_mmap_map fro
m .text
between 'cg14_init_one' (at offset 0x111a78) and 'cg14_probe'
WARNING: vmlinux - Section mismatch: reference to
.init.data:__cg14_mmap_map fro
m .text
between 'cg14_init_one' (at offset 0x111a80) and 'cg14_probe'
WARNING: vmlinux - Section mismatch: reference to
.init.text:sunzilog_init_kbdms
from .text
between 'sunzilog_init_hw' (at offset 0x130848) and 'zs_probe'
WARNING: vmlinux - Section mismatch: reference to
.init.text:sunzilog_register_s
erio from
.text between 'sunzilog_init_hw' (at offset 0x130884) and 'zs_probe'
WARNING: vmlinux - Section mismatch: reference to
.init.text:detect_one_esp from
.text
between 'esp_sbus_probe' (at offset 0x146f28) and 'esp_sbus_remove'
WARNING: drivers/net/sunbmac.o - Section mismatch: reference to
.init.text: from
.text between
'bigmac_sbus_probe' (at offset 0x18c0) and 'bigmac_sbus_remove'
WARNING: drivers/net/sunqe.o - Section mismatch: reference to
.init.text:qec_eth
er_init from .text
between 'qec_sbus_probe' (at offset 0x1004) and 'qec_sbus_rem
ove'
WARNING: drivers/scsi/qlogicpti.o - Section mismatch: reference to
.init.text:qp
ti_map_regs from .text
between 'qpti_sbus_probe' (at offset 0x1b94) and 'qpti_sb
us_remove'
WARNING: drivers/scsi/qlogicpti.o - Section mismatch: reference to
.init.text:qp
ti_register_irq from .text
between 'qpti_sbus_probe' (at offset 0x1ba8) and 'qpt
i_sbus_remove'
WARNING: drivers/scsi/qlogicpti.o - Section mismatch: reference to
.init.text:qp
ti_get_scsi_id from .text
between 'qpti_sbus_probe' (at offset 0x1bbc) and 'qpti
_sbus_remove'
WARNING: drivers/scsi/qlogicpti.o - Section mismatch: reference to
.init.text:qp
ti_map_queues from .text
between 'qpti_sbus_probe' (at offset 0x1be0) and 'qpti_
sbus_remove'
WARNING: drivers/scsi/qlogicpti.o - Section mismatch: reference to
.init.text: f
rom .text between
'qpti_sbus_probe' (at offset 0x1d14) and 'qpti_sbus_remove'
WARNING: drivers/scsi/qlogicpti.o - Section mismatch: reference to
.init.text:qp
ti_chain_del from .text after
'qpti_sbus_remove' (at offset 0x1dd4)
WARNING: "iounmap" [drivers/rtc/rtc-v3020.ko] undefined!
WARNING: "ioremap" [drivers/rtc/rtc-v3020.ko] undefined!
WARNING: "iounmap" [drivers/rtc/rtc-ds1742.ko] undefined!
WARNING: "ioremap" [drivers/rtc/rtc-ds1742.ko] undefined!
WARNING: "iounmap" [drivers/rtc/rtc-ds1553.ko] undefined!
WARNING: "ioremap" [drivers/rtc/rtc-ds1553.ko] undefined!
WARNING: "iounmap" [drivers/parport/parport_ax88796.ko] undefined!
WARNING: "ioremap" [drivers/parport/parport_ax88796.ko] undefined!
WARNING: "__strnlen_user" [drivers/input/misc/uinput.ko] undefined!
WARNING: "insw" [drivers/ide/ide-core.ko] undefined!
WARNING: "outsl" [drivers/ide/ide-core.ko] undefined!
WARNING: "outsw" [drivers/ide/ide-core.ko] undefined!
WARNING: "insl" [drivers/ide/ide-core.ko] undefined!
WARNING: "floppy_hardint" [drivers/block/floppy.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Is it my fault or do I some wrong ?
Thanks
Dan
reply other threads:[~2007-02-10 21:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45CE3BE5.7090208@mydatex.cz \
--to=marvin@mydatex.cz \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.