All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rene Herman <rene.herman@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: ALSA devel <alsa-devel@lists.sourceforge.net>
Subject: Re: isa_bus: es1688
Date: Sun, 18 Feb 2007 20:26:13 +0100	[thread overview]
Message-ID: <45D8A855.4090505@gmail.com> (raw)
In-Reply-To: <s5hvei3abiw.wl%tiwai@suse.de>

[-- Attachment #1: Type: text/plain, Size: 558 bytes --]

On 02/15/2007 12:46 PM, Takashi Iwai wrote:

>> Thank you. Question -- would you allow me to seperate the legacy probing 
>> code into its own function as per the attached?
> 
> That looks fine.  The resultant code will be the same by compiler's
> optimization.  But, please fold lines in 80 chars for the newly added
> code :)

Okay. After folding the new code, es1688 only had two lines >80 left, so 
did those as well.

===
es1688: separate out the legacy probing code into its own function.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
===

Rene.

[-- Attachment #2: es1688_legacy_probe.diff --]
[-- Type: text/plain, Size: 3899 bytes --]

diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index f7d0c5f..786438c 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -77,13 +77,48 @@ static int __devinit snd_es1688_match(st
 	return enable[n];
 }
 
-static int __devinit snd_es1688_probe(struct device *dev, unsigned int n)
+static int __devinit snd_es1688_legacy_create(struct snd_card *card, 
+		struct device *dev, unsigned int n, struct snd_es1688 **rchip)
 {
-	static unsigned long possible_ports[] = {0x220, 0x240, 0x260};
+	static long possible_ports[] = {0x220, 0x240, 0x260};
 	static int possible_irqs[] = {5, 9, 10, 7, -1};
 	static int possible_dmas[] = {1, 3, 0, -1};
-	int i, xirq, xdma;
 
+	int i, error;
+
+	if (irq[n] == SNDRV_AUTO_IRQ) {
+		irq[n] = snd_legacy_find_free_irq(possible_irqs);
+		if (irq[n] < 0) {
+			snd_printk(KERN_ERR "%s: unable to find a free IRQ\n",
+				dev->bus_id);
+			return -EBUSY;
+		}
+	}
+	if (dma8[n] == SNDRV_AUTO_DMA) {
+		dma8[n] = snd_legacy_find_free_dma(possible_dmas);
+		if (dma8[n] < 0) {
+			snd_printk(KERN_ERR "%s: unable to find a free DMA\n",
+				dev->bus_id);
+			return -EBUSY;
+		}
+	}
+
+	if (port[n] != SNDRV_AUTO_PORT)
+		return snd_es1688_create(card, port[n], mpu_port[n], irq[n],
+				mpu_irq[n], dma8[n], ES1688_HW_AUTO, rchip);
+
+	i = 0;
+	do {
+		port[n] = possible_ports[i];
+		error = snd_es1688_create(card, port[n], mpu_port[n], irq[n],
+				mpu_irq[n], dma8[n], ES1688_HW_AUTO, rchip);
+	} while (error < 0 && ++i < ARRAY_SIZE(possible_ports)); 
+
+	return error;
+}
+
+static int __devinit snd_es1688_probe(struct device *dev, unsigned int n)
+{
 	struct snd_card *card;
 	struct snd_es1688 *chip;
 	struct snd_opl3 *opl3;
@@ -94,33 +129,7 @@ static int __devinit snd_es1688_probe(st
 	if (!card)
 		return -EINVAL;
 
-	error = -EBUSY;
-
-	xirq = irq[n];
-	if (xirq == SNDRV_AUTO_IRQ) {
-		xirq = snd_legacy_find_free_irq(possible_irqs);
-		if (xirq < 0) {
-			snd_printk(KERN_ERR "%s: unable to find a free IRQ\n", dev->bus_id);
-			goto out;
-		}
-	}
-
-	xdma = dma8[n];
-	if (xdma == SNDRV_AUTO_DMA) {
-		xdma = snd_legacy_find_free_dma(possible_dmas);
-		if (xdma < 0) {
-			snd_printk(KERN_ERR "%s: unable to find a free DMA\n", dev->bus_id);
-			goto out;
-		}
-	}
-
-	if (port[n] == SNDRV_AUTO_PORT)
-		for (i = 0; i < ARRAY_SIZE(possible_ports) && error < 0; i++)
-			error = snd_es1688_create(card, possible_ports[i], mpu_port[n],
-					xirq, mpu_irq[n], xdma, ES1688_HW_AUTO, &chip);
-	else
-		error = snd_es1688_create(card, port[n], mpu_port[n],
-				xirq, mpu_irq[n], xdma, ES1688_HW_AUTO, &chip);
+	error = snd_es1688_legacy_create(card, dev, n, &chip);
 	if (error < 0)
 		goto out;
 
@@ -134,19 +143,24 @@ static int __devinit snd_es1688_probe(st
 
 	strcpy(card->driver, "ES1688");
 	strcpy(card->shortname, pcm->name);
-	sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", pcm->name, chip->port, xirq, xdma);
+	sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", pcm->name,
+		chip->port, chip->irq, chip->dma8);
 
-	if (snd_opl3_create(card, chip->port, chip->port + 2, OPL3_HW_OPL3, 0, &opl3) < 0)
-		printk(KERN_WARNING "%s: opl3 not detected at 0x%lx\n", dev->bus_id, chip->port);
+	if (snd_opl3_create(card, chip->port, chip->port + 2,
+			OPL3_HW_OPL3, 0, &opl3) < 0)
+		printk(KERN_WARNING "%s: opl3 not detected at 0x%lx\n",
+			dev->bus_id, chip->port);
 	else {
 		error =	snd_opl3_hwdep_new(opl3, 0, 1, NULL);
 		if (error < 0)
 			goto out;
 	}
 
-	if (mpu_irq[n] >= 0 && mpu_irq[n] != SNDRV_AUTO_IRQ && chip->mpu_port > 0) {
-		error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688, chip->mpu_port,
-				0, mpu_irq[n], IRQF_DISABLED, NULL);
+	if (mpu_irq[n] >= 0 && mpu_irq[n] != SNDRV_AUTO_IRQ &&
+			chip->mpu_port > 0) {
+		error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
+				chip->mpu_port, 0,
+				mpu_irq[n], IRQF_DISABLED, NULL);
 		if (error < 0)
 			goto out;
 	}

[-- Attachment #3: Type: text/plain, Size: 345 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

  reply	other threads:[~2007-02-18 19:26 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-14  7:26 isa_bus: es1688 Rene Herman
2007-02-14  7:31 ` Rene Herman
2007-02-14 12:34   ` Takashi Iwai
2007-02-15  5:48     ` Rene Herman
2007-02-15 11:46       ` Takashi Iwai
2007-02-18 19:26         ` Rene Herman [this message]
2007-02-19 12:02           ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45D8A855.4090505@gmail.com \
    --to=rene.herman@gmail.com \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.