Re: [PATCH 4/14] Use resource_size_t for serial port IO addresses

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Hello.

David Gibson wrote:
> At present, various parts of the serial code use unsigned long to
> define resource addresses.  This is a problem, because some 32-bit
> platforms have physical addresses larger than 32-bits, and have mmio
> serial uarts located above the 4GB point.
> 
> This patch changes the type of mapbase in both struct uart_port and
> struct plat_serial8250_port to resource_size_t, which can be
> configured to be 64 bits on such platforms.  The mapbase in
> serial_struct can't safely be changed, because that structure is user
> visible.

    Erm, isn't linux-serial@vger.kernel.org more proper list for such patches?
Also, as serial drivers are now unmaintained, this probably needs to go to -mm 
tree.

> Signed-off-by: David Gibson <dwg@au1.ibm.com>

> Index: working-2.6/drivers/serial/serial_core.c
> ===================================================================
> --- working-2.6.orig/drivers/serial/serial_core.c	2007-02-19 11:07:42.000000000 +1100
> +++ working-2.6/drivers/serial/serial_core.c	2007-02-19 11:07:43.000000000 +1100
> @@ -633,7 +633,7 @@ static int uart_get_info(struct uart_sta
>  	tmp.hub6	    = port->hub6;
>  	tmp.io_type         = port->iotype;
>  	tmp.iomem_reg_shift = port->regshift;
> -	tmp.iomem_base      = (void *)port->mapbase;
> +	tmp.iomem_base      = (void *)(unsigned long)port->mapbase;

    For 32-bit kernels this may result in a meaningless address. Have you 
considered also changing iomem_base's type?

MBR, Sergei