All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luca Manai <luca.manai@duolabs.com>
To: linuxppc-embedded@ozlabs.org
Subject: Help with a board similar to the Xilinx ML403
Date: Thu, 22 Feb 2007 14:47:47 +0100	[thread overview]
Message-ID: <45DD9F03.6060004@duolabs.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 4997 bytes --]

Hello.

I would need some help to understand what is the problem...
I am a bit lost...

The board is very similar to the Xilinx ML403 with a Virtex-4 and PPC 405.

What can I provide to make the debugging easier?

Can the problem be the content of the initrd RAM disk?

Thanks for your help.

Luca.

===========================================================================

loaded at:     00400000 0065213C
board data at: 00650124 0065013C
relocated to:  0040408C 004040A4
zimage at:     00404E19 004F055F
initrd at:     004F1000 0064FE30
avail ram:     00653000 04000000

Linux/PPC load: console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel
[    0.000000] Linux version 2.6.20 (rapax@localhost.localdomain) (gcc 
version 3.4.4) #24 Thu Feb 22 14:26:45 CET 2007
[    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->    16384
[    0.000000]   Normal      16384 ->    16384
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    16384
[    0.000000] Built 1 zonelists.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,9600
[    0.000000] Xilinx INTC #0 at 0x05810000 mapped to 0xFDFFE000
[    0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[    0.000254] Console: colour dummy device 80x25
[    0.001029] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.002145] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.022641] Memory: 61408k available (1560k kernel code, 432k data, 
100k init, 0k highmem)
[    0.208605] Mount-cache hash table entries: 512
[    0.215183] NET: Registered protocol family 16
[    0.240164] NET: Registered protocol family 2
[    0.296652] IP route cache hash table entries: 1024 (order: 0, 4096 
bytes)
[    0.297952] TCP established hash table entries: 2048 (order: 1, 8192 
bytes)
[    0.298188] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.298314] TCP: Hash tables configured (established 2048 bind 1024)
[    0.298347] TCP reno registered
[    0.317702] checking if image is initramfs...it isn't (no cpio 
magic); looks like an initrd
[    1.078167] Freeing initrd memory: 1403k freed
[    1.085007] io scheduler noop registered
[    1.085068] io scheduler anticipatory registered (default)
[    1.085098] io scheduler deadline registered
[    1.085303] io scheduler cfq registered
[    1.158419] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
sharing disabled
[    1.166897] serial8250.0: ttyS0 at MMIO 0x6001003 (irq = 5) is a 16550A
[    1.868935] RAMDISK driver initialized: 16 RAM disks of 65536K size 
1024 blocksize
[    1.901545] tun: Universal TUN/TAP device driver, 1.6
[    1.921877] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.948919] XTemac: using sgDMA mode.
[    1.963764] XTemac: using TxDRE mode
[    1.978133] XTemac: using RxDRE mode
[    1.992471] XTemac: buffer descriptor size: 32768 (0x8000)
[    2.015328] XTemac: (buffer_descriptor_init) phy: 0x610000, virt: 
0xff100000, size: 0x8000
[    2.055149] eth0: Dropping NETIF_F_SG since no checksum feature.
[    2.080791] eth0: Xilinx TEMAC #0 at 0xFFE00000 mapped to 0xC5000000, 
irq=4
[    2.108767] eth0: XTemac id 1.0f, block id 5, type 8
[    2.129728] mice: PS/2 mouse device common for all mice
[    2.151097] TCP cubic registered
[    2.164340] NET: Registered protocol family 1
[    2.181936] NET: Registered protocol family 17
[    2.201411] RAMDISK: Compressed image found at block 0
[    3.229002] VFS: Mounted root (ext2 filesystem).
[    3.355400] ------------[ cut here ]------------
[    3.373911] kernel BUG at mm/prio_tree.c:79!
[    3.390991] Oops: Exception in kernel mode, sig: 5 [#1]
[    3.411889] NIP: C003FA34 LR: C0044D68 CTR: 00000000
[    3.431752] REGS: c04b7dc0 TRAP: 0700   Not tainted  (2.6.20)
[    3.454721] MSR: 00029030 <EE,ME,IR,DR>  CR: 44088048  XER: 2000000E
[    3.480351] TASK = c02a9490[140] 'ifconfig' THREAD: c04b6000
[    3.502282] GPR00: 00000001 C04B7E70 C02A9490 C0486BA8 C044E95C 
C04B7E20 C04B7E24 0FFDF000
[    3.535955] GPR08: 000000AD 00000010 0000000F 00000011 24004042 
10065ABC 00000001 30017510
[    3.569632] GPR16: 10001B05 00000000 0FFDF000 000000AD C0432B94 
00000000 C0432BA8 00000000
[    3.603306] GPR24: C0675E20 00000000 0FFF0000 C044BA00 00000000 
C0486B54 C0486BA8 C0486DA0
[    3.637713] NIP [C003FA34] vma_prio_tree_add+0x54/0xd0
[    3.658333] LR [C0044D68] vma_adjust+0x264/0x384
[    3.676836] Call Trace:
[    3.686598] [C04B7E70] [C0044D68] vma_adjust+0x264/0x384 (unreliable)
[    3.712428] [C04B7ED0] [C0045B2C] split_vma+0x118/0x13c
[    3.733395] [C04B7EF0] [C0046CF8] sys_mprotect+0x210/0x4dc
[    3.755370] [C04B7F40] [C0002E54] ret_from_syscall+0x0/0x3c
[    3.777723] Instruction dump:
[    3.789602] 80040008 7d675850 7c0a0050 556ba33e 5400a33e 7d295a14 
7d080214 3908ffff
[    3.820807] 3929ffff 7d294278 3149ffff 7c0a4910 <0f000000> 39200000 
9123002c 8004002c


[-- Attachment #2: Type: text/html, Size: 7201 bytes --]

             reply	other threads:[~2007-02-22 14:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-22 13:47 Luca Manai [this message]
2007-02-22 18:37 ` Help with a board similar to the Xilinx ML403 Leonid

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45DD9F03.6060004@duolabs.com \
    --to=luca.manai@duolabs.com \
    --cc=linuxppc-embedded@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.