From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bernard Pidoux Subject: Re: Problems ax25 with 1270b (TF27 chip) Date: Mon, 05 Mar 2007 13:13:59 +0100 Message-ID: <45EC0987.7020009@ccr.jussieu.fr> References: <1173072551.3328.52.camel@localhost.localdomain> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1173072551.3328.52.camel@localhost.localdomain> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: vk5hsx@wia.org.au Cc: Linux-Hams Mailing List Stef Daniels VK5HSX wrote: > Greetings, > > A fellow sysop and myself have been working trying to get MFJ 1270b TNC > (using TF27 Hostmode chip) with Debian GNU\Linux (Stable). The problem > is the fact that when we try to use 'call' command on that port the > TNC's 'STA' led comes on and hangs. We have tried it with different O\S > (ie. Slackware, Debian), different kernels (2.4.33 & 2.6.14, 2.6.19) > without any luck. The TNC does work, as we have tested it on another > machine with packet. The only change from the last system that worked > was now we are using modems as apposed to DRSI cards. > > Has anyone else come across this problem? > > We are wondering if it has something to do with crc-mkiss or ax25. We > have compiled the ax25 libs, tools & apps from source and installed > binaries. > > Any ideas, comments would be welcome.. ( I haven't given any scripts, > as the scripts were fine from last installation. However, it was more of > a question if someone else has come across this problem. > > Thanks in advance.. Did you put your TNC into kiss mode and are you using mkiss driver ? 73 de Bernard, f6bvp