From: Tejun Heo <htejun@gmail.com>
To: rweeks@razorwire.ca
Cc: linux-ide@vger.kernel.org
Subject: Re: sata-nv hotplug feature
Date: Thu, 08 Mar 2007 17:21:01 +0900 [thread overview]
Message-ID: <45EFC76D.9020408@gmail.com> (raw)
In-Reply-To: <200703072039.18588.rweeks@razorwire.ca>
Russ Weeks wrote:
> uname -a:
> Linux backfire 2.6.19.2-smp #2 SMP Sat Mar 3 13:06:28 PST 2007 x86_64 x86_64
> x86_64 GNU/Linux
>
> lspci shows this:
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
> 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
>
> lsmod shows that libata and sata-nv are present.
>
> rescan-scsi-bus.sh shows this (after I boot with 1 drive plugged in and then
> try to plug in the other 2):
> OLD: Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST3250824AS Rev: 3.AA
> Type: Direct-Access ANSI SCSI revision: 05
>
> (this seems correct, just that 2 other drives are missing)
>
> The hardware is a Tyan Thunder K8W 2895 motherboard with an onboard
> controller. 3 250Gb Seagate Barracudas are attached, 2 are in removable
> drive trays made by some company called 'ByteCC'.
I suppose it isn't a CK804 as just pluggin/unplugging should work on it.
Rescanning should do the job tho. Can you post the result of 'dmesg'
after boot?
--
tejun
next prev parent reply other threads:[~2007-03-08 8:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-08 4:39 sata-nv hotplug feature Russ Weeks
2007-03-08 8:21 ` Tejun Heo [this message]
2007-03-08 9:38 ` Jim Paris
2007-03-10 6:36 ` Russ Weeks
2007-03-12 5:41 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45EFC76D.9020408@gmail.com \
--to=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=rweeks@razorwire.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.