From: Jiri Slaby <jirislaby@gmail.com>
To: Jiri Kosina <jikos@jikos.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>,
linux-kernel@vger.kernel.org, Greg Kroah-Hartman <gregkh@suse.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: Keyboard stops working after *lock [Was: 2.6.21-rc2-mm1]
Date: Mon, 12 Mar 2007 23:32:07 +0100 [thread overview]
Message-ID: <45F5D4E7.7040209@gmail.com> (raw)
In-Reply-To: <Pine.LNX.4.64.0703122157550.14144@twin.jikos.cz>
Jiri Kosina napsal(a):
> (trimmed CC list a bit)
>
> On Mon, 12 Mar 2007, Jiri Slaby wrote:
>
>>>> UHCI: Eliminate asynchronous skeleton Queue Headers
>>> Post it along with the usbmon log, and I'll try to figure out what happened.
>> Here it comes:
>> USBMON:
>> f7525b40 1832950485 C Ii:004:01 0 8 = 00005300 00000000
>> f7525b40 1832950517 S Ii:004:01 -115 8 <
>> f7525140 1832950540 S Co:004:00 s 21 09 0200 0000 0001 1 = 01
>> f7525140 1832952485 C Co:004:00 0 1 >
>> Corresponds to numlock; 7; numlock; 7.
Alan, sorry for the previous bad post, I mismatched 2 files. This is
hopefully correct.
> thanks. Could you also please redo the test with the offending uhci patch
> reverted and send the output of a working situation?
- BAD kernel:
USBMON output:
d28dba40 1882513063 C Ii:008:01 0 8 = 00005300 00000000
d28dba40 1882513090 S Ii:008:01 -115 8 <
f7b31340 1882515363 S Co:008:00 s 21 09 0200 0000 0001 1 = 00
f7b31340 1882517065 C Co:008:00 0 1 >
UHCI snapshot before hang:
Root-hub state: running FSBR: 0
HC status
usbcmd = 00c1 Maxp64 CF RS
usbstat = 0000
usbint = 000f
usbfrnum = (1)764
flbaseadd = 0303d764
sof = 40
stat1 = 01a5 LowSpeed Enabled Connected
stat2 = 0095 Enabled Connected
Most recent frame: 75a2 (418) Last ISO frame: 75a2 (418)
Periodic load table
12 0 0 0 127 0 0 0
0 0 0 0 127 0 0 0
0 0 0 0 127 0 0 0
0 0 0 0 127 0 0 0
Total: 520, #INT: 4, #ISO: 0
Frame List
Skeleton QHs
- skel_unlink_qh
[c3c41000] Skel QH link (00000001) element (00000001)
queue is empty
- skel_iso_qh
[c3c41060] Skel QH link (00000001) element (00000001)
queue is empty
- skel_int128_qh
[c3c410c0] Skel QH link (03c41542) element (00000001)
queue is empty
[c3c41540] INT QH link (03c41362) element (02c4a0f0)
period 128 phase 0 load 12 us
urb_priv [f7b2da4c] urb [f7b314c0] qh [c3c41540] Dev=7 EP=1(IN) INT Actlen=0
1: [c2c4a0f0] link (02c4a0c0) e3 IOC Active NAK Length=7ff MaxLen=0
DT1 EndPt=1 Dev=7, PID=69(IN) (buf=36a4a040)
Dummy TD
[c2c4a0c0] link (02c4a120) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
- skel_int64_qh
[c3c41120] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int32_qh
[c3c41180] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int16_qh
[c3c411e0] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int8_qh
[c3c41240] Skel QH link (03c41482) element (00000001)
queue is empty
[c3c41480] INT QH link (03c41602) element (02c4a030)
period 8 phase 4 load 93 us
urb_priv [f7b2d3bc] urb [d28dbc40] qh [c3c41480] Dev=2 EP=1(IN) INT Actlen=0
1: [c2c4a030] link (02c4a060) e3 LS IOC Active NAK Length=7ff
MaxLen=3 DT0 EndPt=1 Dev=2, PID=69(IN) (buf=037c5000)
Dummy TD
[c2c4a060] link (02c4a0f0) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
[c3c41600] INT QH link (03c41662) element (02c4a150)
period 8 phase 4 load 17 us
urb_priv [f7b2da30] urb [d28dba40] qh [c3c41600] Dev=8 EP=1(IN) INT Actlen=0
1: [c2c4a150] link (02c4a120) e3 IOC Active NAK Length=7ff MaxLen=7
DT1 EndPt=1 Dev=8, PID=69(IN) (buf=037c5180)
Dummy TD
[c2c4a120] link (02c4a180) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
[c3c41660] INT QH link (03c41362) element (02c4a1b0)
period 8 phase 4 load 17 us
urb_priv [f7b2d9f8] urb [d1622840] qh [c3c41660] Dev=8 EP=2(IN) INT Actlen=0
1: [c2c4a1b0] link (02c4a1e0) e3 IOC Active NAK Length=7ff MaxLen=4
DT0 EndPt=2 Dev=8, PID=69(IN) (buf=037c5300)
Dummy TD
[c2c4a1e0] link (02c4a210) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
- skel_int4_qh
[c3c412a0] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int2_qh
[c3c41300] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_async_qh
[c3c41360] Skel QH link (00000001) element (02c4a000)
queue is empty
- skel_term_qh
[c3c413c0] Skel QH link (00000001) element (02c4a000)
queue is empty
UHCI snapshot after hang:
Root-hub state: running FSBR: 0
HC status
usbcmd = 00c1 Maxp64 CF RS
usbstat = 0000
usbint = 000f
usbfrnum = (1)c2c
flbaseadd = 0303dc2c
sof = 40
stat1 = 01a5 LowSpeed Enabled Connected
stat2 = 0095 Enabled Connected
Most recent frame: 9efc (764) Last ISO frame: 9efc (764)
Periodic load table
12 0 0 0 127 0 0 0
0 0 0 0 127 0 0 0
0 0 0 0 127 0 0 0
0 0 0 0 127 0 0 0
Total: 520, #INT: 4, #ISO: 0
Frame List
Skeleton QHs
- skel_unlink_qh
[c3c41000] Skel QH link (00000001) element (00000001)
queue is empty
- skel_iso_qh
[c3c41060] Skel QH link (00000001) element (00000001)
queue is empty
- skel_int128_qh
[c3c410c0] Skel QH link (03c41542) element (00000001)
queue is empty
[c3c41540] INT QH link (03c41362) element (02c4a0f0)
period 128 phase 0 load 12 us
urb_priv [f7b2da4c] urb [f7b314c0] qh [c3c41540] Dev=7 EP=1(IN) INT Actlen=0
1: [c2c4a0f0] link (02c4a0c0) e3 IOC Active NAK Length=7ff MaxLen=0
DT1 EndPt=1 Dev=7, PID=69(IN) (buf=36a4a040)
Dummy TD
[c2c4a0c0] link (02c4a120) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
- skel_int64_qh
[c3c41120] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int32_qh
[c3c41180] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int16_qh
[c3c411e0] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int8_qh
[c3c41240] Skel QH link (03c41482) element (00000001)
queue is empty
[c3c41480] INT QH link (03c41602) element (02c4a030)
period 8 phase 4 load 93 us
urb_priv [f7b2d3bc] urb [d28dbc40] qh [c3c41480] Dev=2 EP=1(IN) INT Actlen=0
1: [c2c4a030] link (02c4a060) e3 LS IOC Active NAK Length=7ff
MaxLen=3 DT0 EndPt=1 Dev=2, PID=69(IN) (buf=037c5000)
Dummy TD
[c2c4a060] link (02c4a0f0) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
[c3c41600] INT QH link (03c41662) element (02c4a120)
period 8 phase 4 load 17 us
urb_priv [f7b2da30] urb [d28dba40] qh [c3c41600] Dev=8 EP=1(IN) INT Actlen=0
1: [c2c4a120] link (02c4a180) e3 IOC Active NAK Length=7ff MaxLen=7
DT0 EndPt=1 Dev=8, PID=69(IN) (buf=037c5180)
Dummy TD
[c2c4a180] link (02c4a150) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
[c3c41660] INT QH link (03c41362) element (02c4a1b0)
period 8 phase 4 load 17 us
urb_priv [f7b2d9f8] urb [d1622840] qh [c3c41660] Dev=8 EP=2(IN) INT Actlen=0
1: [c2c4a1b0] link (02c4a1e0) e3 IOC Active NAK Length=7ff MaxLen=4
DT0 EndPt=2 Dev=8, PID=69(IN) (buf=037c5300)
Dummy TD
[c2c4a1e0] link (02c4a210) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
- skel_int4_qh
[c3c412a0] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_int2_qh
[c3c41300] Skel QH link (03c41362) element (00000001)
queue is empty
- skel_async_qh
[c3c41360] Skel QH link (00000001) element (02c4a000)
queue is empty
- skel_term_qh
[c3c413c0] Skel QH link (00000001) element (02c4a000)
queue is empty
*******************************************************************
- GOOD kernel (reverted):
USBMON output:
f7b31ec0 2545055172 C Ii:004:01 0 8 = 00005300 00000000
f7b31ec0 2545055198 S Ii:004:01 -115 8 <
f588aec0 2545055215 S Co:004:00 s 21 09 0200 0000 0001 1 = 01
f588aec0 2545057168 C Co:004:00 0 1 >
f7b31ec0 2545135153 C Ii:004:01 0 8 = 00000000 00000000
f7b31ec0 2545135166 S Ii:004:01 -115 8 <
UHCI snapshot:
Root-hub state: running FSBR: 0
HC status
usbcmd = 00c1 Maxp64 CF RS
usbstat = 0000
usbint = 000f
usbfrnum = (0)988
flbaseadd = 2fce2988
sof = 40
stat1 = 01a5 LowSpeed Enabled Connected
stat2 = 0095 Enabled Connected
Most recent frame: 10a4d (589) Last ISO frame: 10a4d (589)
Periodic load table
12 0 0 0 34 0 0 0
0 0 0 0 34 0 0 0
0 0 0 0 34 0 0 0
0 0 0 0 34 0 0 0
Total: 148, #INT: 3, #ISO: 0
Frame List
Skeleton QHs
- skel_unlink_qh
[e2d00000] Skel QH link (00000001) element (00000001)
queue is empty
- skel_iso_qh
[e2d00060] Skel QH link (00000001) element (00000001)
queue is empty
- skel_int128_qh
[e2d000c0] Skel QH link (22d00602) element (00000001)
queue is empty
[e2d00600] INT QH link (22d00362) element (31db7030)
period 128 phase 0 load 12 us
urb_priv [e2cc63bc] urb [f7427bc0] qh [e2d00600] Dev=3 EP=1(IN) INT Actlen=0
1: [f1db7030] link (31db7090) e3 IOC Active NAK Length=7ff MaxLen=0
DT0 EndPt=1 Dev=3, PID=69(IN) (buf=32f3f040)
Dummy TD
[f1db7090] link (31db70c0) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
- skel_int64_qh
[e2d00120] Skel QH link (22d00362) element (00000001)
queue is empty
- skel_int32_qh
[e2d00180] Skel QH link (22d00362) element (00000001)
queue is empty
- skel_int16_qh
[e2d001e0] Skel QH link (22d00362) element (00000001)
queue is empty
- skel_int8_qh
[e2d00240] Skel QH link (22d006c2) element (00000001)
queue is empty
[e2d006c0] INT QH link (22d00722) element (31db7060)
period 8 phase 4 load 17 us
urb_priv [e2cc63a0] urb [f7b31ec0] qh [e2d006c0] Dev=4 EP=1(IN) INT Actlen=0
1: [f1db7060] link (31db70f0) e3 IOC Active NAK Length=7ff MaxLen=7
DT0 EndPt=1 Dev=4, PID=69(IN) (buf=2fce3180)
Dummy TD
[f1db70f0] link (31db7180) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
[e2d00720] INT QH link (22d00362) element (31db7120)
period 8 phase 4 load 17 us
urb_priv [e2cc6384] urb [f72a52c0] qh [e2d00720] Dev=4 EP=2(IN) INT Actlen=0
1: [f1db7120] link (31db7150) e3 IOC Active NAK Length=7ff MaxLen=4
DT0 EndPt=2 Dev=4, PID=69(IN) (buf=2fce3300)
Dummy TD
[f1db7150] link (31db7180) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0,
PID=e1(OUT) (buf=00000000)
- skel_int4_qh
[e2d002a0] Skel QH link (22d00362) element (00000001)
queue is empty
- skel_int2_qh
[e2d00300] Skel QH link (22d00362) element (00000001)
queue is empty
- skel_int1_qh
[e2d00360] Skel QH link (22d003c2) element (00000001)
queue is empty
- skel_ls_control_qh
[e2d003c0] Skel QH link (22d00422) element (00000001)
queue is empty
- skel_fs_control_qh
[e2d00420] Skel QH link (22d00482) element (00000001)
queue is empty
- skel_bulk_qh
[e2d00480] Skel QH link (22d004e2) element (00000001)
queue is empty
- skel_term_qh
[e2d004e0] Skel QH link (00000001) element (31db7000)
queue is empty
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
next prev parent reply other threads:[~2007-03-12 22:32 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-02 11:00 2.6.21-rc2-mm1 Andrew Morton
2007-03-02 11:04 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-02 17:30 ` 2.6.21-rc2-mm1 Randy Dunlap
2007-03-04 11:58 ` [Re: 2.6.21-rc2-mm1] #error no ROMFS backing store interface configured Maciej Rutecki
2007-03-04 12:11 ` Andrew Morton
2007-03-04 15:11 ` David Howells
2007-03-04 15:25 ` Adrian Bunk
2007-03-04 15:35 ` David Howells
2007-03-05 1:49 ` [-mm patch] fix the ROMFS_* dependencies Adrian Bunk
2007-03-05 13:36 ` David Howells
2007-03-06 23:43 ` Adrian Bunk
2007-03-04 15:11 ` [Re: 2.6.21-rc2-mm1] #error no ROMFS backing store interface configured Maciej Rutecki
2007-03-02 11:04 ` 2.6.21-rc2-mm1 Russell King
2007-03-02 11:08 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-02 11:10 ` 2.6.21-rc2-mm1 Russell King
2007-03-02 11:15 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-03 18:03 ` 2.6.21-rc2-mm1 Russell King
2007-03-05 10:41 ` arm utrace Roland McGrath
2007-03-02 14:05 ` 2.6.21-rc2-mm1: EIP is at ext2_discard_reservation+0x1c/0x52 Alexey Dobriyan
2007-03-02 14:24 ` 2.6.21-rc2-mm1 Bryan Wu
2007-03-02 14:40 ` [-mm patch] cpu_idle: fix build break Frederik Deweerdt
2007-03-02 15:24 ` Venkatesh Pallipadi
2007-03-02 16:24 ` Frederik Deweerdt
2007-03-02 15:42 ` 2.6.21-rc2-mm1 - build error with HOTPLUG_CPU=N, CPU_IDLE=Y Valdis.Kletnieks
2007-03-02 15:56 ` 2.6.21-rc2-mm1 Michal Piotrowski
2007-03-05 10:14 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-05 10:30 ` 2.6.21-rc2-mm1 Antonino A. Daplas
2007-03-02 16:03 ` 2.6.21-rc2-mm1 - fb_ddc_read() not defined Valdis.Kletnieks
2007-03-02 16:31 ` James Simmons
2007-03-02 16:51 ` Valdis.Kletnieks
2007-03-02 16:19 ` [PATCH] longhaul pci_find_device -> pci_get_device conversion (was: Re: 2.6.21-rc2-mm1) Michal Piotrowski
[not found] ` <3888a5cd0703020945r4ca51f3dxe981050b817e7594@mail.gmail.com>
2007-03-02 18:10 ` Michal Piotrowski
2007-03-02 16:32 ` 2.6.21-rc2-mm1 Badari Pulavarty
2007-03-02 17:03 ` [patch -mm] x86_64: fake numa cmdline flag fix David Rientjes
2007-03-02 17:21 ` Badari Pulavarty
2007-03-02 17:10 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-02 17:15 ` 2.6.21-rc2-mm1 Badari Pulavarty
2007-03-02 21:12 ` 2.6.21-rc2-mm1: what about CONFIG_NO_HZ and !CONFIG_SMP ? Laurent Riffard
2007-03-02 20:57 ` Siddha, Suresh B
2007-03-02 22:09 ` Laurent Riffard
2007-03-02 22:52 ` 2.6.21-rc2-mm1: pata_via: wrong cable detection Laurent Riffard
2007-03-02 23:05 ` [PATCH -mm] char/epca.c remove unused function (was: Re: 2.6.21-rc2-mm1) Michal Piotrowski
2007-03-03 0:48 ` Alan Cox
2007-03-02 23:42 ` 2.6.21-rc2-mm1 Michal Piotrowski
2007-03-03 0:40 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-03 1:22 ` 2.6.21-rc2-mm1 Michal Piotrowski
2007-03-03 1:41 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-03 10:08 ` 2.6.21-rc2-mm1 Michal Piotrowski
2007-03-03 12:06 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-03 7:45 ` 2.6.21-rc2-mm1 - build error with CONFIG_NO_HZ=y and CONFIG_SMP=n Antonino A. Daplas
2007-03-03 7:59 ` Andrew Morton
2007-03-03 15:39 ` Keyboard stops working after *lock [Was: 2.6.21-rc2-mm1] Jiri Slaby
2007-03-03 15:54 ` Jiri Slaby
2007-03-03 17:41 ` Andrew Morton
2007-03-09 10:31 ` Jiri Slaby
2007-03-09 14:13 ` Dmitry Torokhov
2007-03-09 14:40 ` Jiri Kosina
2007-03-09 16:01 ` Jiri Kosina
2007-03-09 16:48 ` Jiri Slaby
2007-03-09 17:10 ` Jiri Slaby
2007-03-11 21:39 ` Jiri Slaby
2007-03-11 21:47 ` Jiri Kosina
2007-03-11 21:53 ` Jiri Slaby
2007-03-11 22:11 ` Jiri Slaby
2007-03-12 9:08 ` Jiri Slaby
2007-03-12 15:09 ` Alan Stern
2007-03-12 16:28 ` Jiri Slaby
2007-03-12 19:56 ` Alan Stern
2007-03-12 21:00 ` Jiri Kosina
2007-03-12 22:32 ` Jiri Slaby [this message]
2007-03-13 16:01 ` Alan Stern
2007-03-13 16:13 ` Jiri Slaby
2007-03-13 16:30 ` Alan Stern
2007-03-15 20:00 ` Alan Stern
2007-03-16 10:52 ` Jiri Slaby
2007-03-17 22:50 ` Jiri Slaby
2007-03-18 2:39 ` Alan Stern
2007-03-18 8:46 ` Jiri Slaby
2007-03-18 14:26 ` Alan Stern
2007-03-18 14:36 ` Jiri Slaby
2007-03-18 15:39 ` Alan Stern
2007-03-18 15:45 ` Jiri Slaby
2007-03-18 16:11 ` Alan Stern
2007-03-04 9:07 ` 2.6.21-rc2-mm1 Mariusz Kozlowski
2007-03-04 9:48 ` 2.6.21-rc2-mm1 Mariusz Kozlowski
2007-03-04 11:34 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-04 12:01 ` 2.6.21-rc2-mm1 Mariusz Kozlowski
2007-03-04 17:06 ` 2.6.21-rc2-mm1 Mariusz Kozlowski
2007-03-04 17:13 ` 2.6.21-rc2-mm1 Michal Piotrowski
2007-03-04 17:20 ` 2.6.21-rc2-mm1 Michal Piotrowski
2007-03-05 16:34 ` 2.6.21-rc2-mm1 Zan Lynx
2007-03-05 0:11 ` 2.6.21-rc2-mm1 J.A. Magallón
2007-03-05 0:29 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-05 1:17 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-05 2:25 ` 2.6.21-rc2-mm1 Neil Brown
2007-03-05 15:42 ` 2.6.21-rc2-mm1 Bill Davidsen
2007-03-05 1:47 ` [-mm patch] saa7134: fix MODULES=n compilation Adrian Bunk
2007-03-05 1:47 ` 2.6.21-rc2-mm1: drivers/net/wireless/ compile error Adrian Bunk
2007-03-05 10:41 ` Michael Buesch
2007-03-05 1:47 ` 2.6.21-rc2-mm1: drivers/usb/host/ohci-ssb.c doesn't compile Adrian Bunk
2007-03-05 10:49 ` Michael Buesch
2007-03-05 10:57 ` Michael Buesch
2007-03-05 11:26 ` Michael Buesch
2007-03-05 18:26 ` Greg KH
2007-03-05 18:37 ` Adrian Bunk
2007-03-05 18:42 ` David Brownell
2007-03-05 19:09 ` Michael Buesch
2007-03-05 1:47 ` [-mm patch] arch/i386/kernel/vmi.c must #include <asm/kmap_types.h> Adrian Bunk
2007-03-05 2:57 ` Zachary Amsden
2007-03-05 1:47 ` [-mm patch] remove arch/i386/kernel/tsc.c:custom_sched_clock Adrian Bunk
2007-03-05 2:57 ` Zachary Amsden
2007-03-05 1:47 ` [-mm patch] make drivers/char/drm/drm_vm.c:drm_io_prot() static Adrian Bunk
2007-03-05 1:47 ` [-mm patch] drivers/cpuidle/: make code static Adrian Bunk
2007-03-05 1:49 ` [-mm patch] drivers/media/video/ivtv/: possible cleanups Adrian Bunk
2007-03-05 6:53 ` [v4l-dvb-maintainer] " Hans Verkuil
2007-03-05 1:49 ` [-mm patch] drivers/net/bonding/bond_main.c:make 3 functions static Adrian Bunk
2007-03-05 1:49 ` [-mm patch] make drivers/video/display/display-sysfs.c:display_class static Adrian Bunk
2007-03-05 1:49 ` [-mm patch] make fb_deferred_io_mkwrite() static Adrian Bunk
2007-03-05 1:49 ` [-mm patch] drivers/video/hecubafb.c: make 4 functions static Adrian Bunk
2007-03-05 22:20 ` 2.6.21-rc2-mm1 J.A. Magallón
2007-03-05 23:11 ` 2.6.21-rc2-mm1 Andrew Morton
2007-03-06 6:25 ` [PATCH] sched: fix idle at tick Con Kolivas
[not found] ` <20070305230240.9c2741d1.akpm@linux-foundation.org>
2007-03-06 7:41 ` Con Kolivas
2007-03-06 8:38 ` J.A. Magallón
2007-03-06 0:16 ` i2c vs nVidia [Re: 2.6.21-rc2-mm1] J.A. Magallón
2007-03-06 0:33 ` Andrew Morton
2007-03-06 0:44 ` Greg KH
2007-03-06 8:45 ` Jean Delvare
2007-03-06 10:56 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45F5D4E7.7040209@gmail.com \
--to=jirislaby@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@suse.de \
--cc=jikos@jikos.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.