From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Andi Kleen <ak@suse.de>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@elte.hu>,
Stephane Eranian <eranian@hpl.hp.com>,
Andrew Morton <akpm@linux-foundation.org>,
"Randy.Dunlap" <rdunlap@xenotime.net>
Subject: [PATCH] i386: Simplify smp_call_function*() by using common implementation
Date: Mon, 12 Mar 2007 18:12:55 -0700 [thread overview]
Message-ID: <45F5FA97.8070705@goop.org> (raw)
Subject: Simplify smp_call_function*() by using common implementation
smp_call_function and smp_call_function_single are almost complete
duplicates of the same logic. This patch combines them by
implementing them in terms of the more general
smp_call_function_mask().
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@elte.hu>
---
arch/i386/kernel/smp.c | 213 ++++++++++++++++++++++--------------------------
1 file changed, 102 insertions(+), 111 deletions(-)
===================================================================
--- a/arch/i386/kernel/smp.c
+++ b/arch/i386/kernel/smp.c
@@ -515,6 +515,73 @@ void unlock_ipi_call_lock(void)
static struct call_data_struct *call_data;
+
+/**
+ * smp_call_function_mask(): Run a function on a set of other CPUs.
+ * @mask: The set of cpus to run on. Must not include the current cpu.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code. Does not return until
+ * remote CPUs are nearly ready to execute <<func>> or are or have finished.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function_mask(cpumask_t mask,
+ void (*func)(void *), void *info,
+ int wait)
+{
+ struct call_data_struct data;
+ cpumask_t allbutself;
+ int cpus;
+
+ /* Can deadlock when called with interrupts disabled */
+ WARN_ON(irqs_disabled());
+
+ /* Holding any lock stops cpus from going down. */
+ spin_lock(&call_lock);
+
+ allbutself = cpu_online_map;
+ cpu_clear(smp_processor_id(), allbutself);
+
+ cpus_and(mask, mask, allbutself);
+ cpus = cpus_weight(mask);
+
+ if (!cpus) {
+ spin_unlock(&call_lock);
+ return 0;
+ }
+
+ data.func = func;
+ data.info = info;
+ atomic_set(&data.started, 0);
+ data.wait = wait;
+ if (wait)
+ atomic_set(&data.finished, 0);
+
+ call_data = &data;
+ mb();
+
+ /* Send a message to other CPUs */
+ if (cpus_equal(mask, allbutself))
+ send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+ else
+ send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
+
+ /* Wait for response */
+ while (atomic_read(&data.started) != cpus)
+ cpu_relax();
+
+ if (wait)
+ while (atomic_read(&data.finished) != cpus)
+ cpu_relax();
+ spin_unlock(&call_lock);
+
+ return 0;
+}
+
/**
* smp_call_function(): Run a function on all other CPUs.
* @func: The function to run. This must be fast and non-blocking.
@@ -528,48 +595,43 @@ static struct call_data_struct *call_dat
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
- struct call_data_struct data;
- int cpus;
-
- /* Holding any lock stops cpus from going down. */
- spin_lock(&call_lock);
- cpus = num_online_cpus() - 1;
- if (!cpus) {
- spin_unlock(&call_lock);
- return 0;
- }
-
- /* Can deadlock when called with interrupts disabled */
- WARN_ON(irqs_disabled());
-
- data.func = func;
- data.info = info;
- atomic_set(&data.started, 0);
- data.wait = wait;
- if (wait)
- atomic_set(&data.finished, 0);
-
- call_data = &data;
- mb();
-
- /* Send a message to all other CPUs and wait for them to respond */
- send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-
- /* Wait for response */
- while (atomic_read(&data.started) != cpus)
- cpu_relax();
-
- if (wait)
- while (atomic_read(&data.finished) != cpus)
- cpu_relax();
- spin_unlock(&call_lock);
-
- return 0;
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+{
+ return smp_call_function_mask(cpu_online_map, func, info, wait);
}
EXPORT_SYMBOL(smp_call_function);
+
+/*
+ * smp_call_function_single - Run a function on another CPU
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Currently unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Retrurns 0 on success, else a negative status code.
+ *
+ * Does not return until the remote CPU is nearly ready to execute <func>
+ * or is or has executed.
+ */
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ /* prevent preemption and reschedule on another processor */
+ int ret;
+ int me = get_cpu();
+ if (cpu == me) {
+ WARN_ON(1);
+ put_cpu();
+ return -EBUSY;
+ }
+
+ ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
+
+ put_cpu();
+ return ret;
+}
+EXPORT_SYMBOL(smp_call_function_single);
static void stop_this_cpu (void * dummy)
{
@@ -633,77 +695,6 @@ fastcall void smp_call_function_interrup
}
}
-/*
- * this function sends a 'generic call function' IPI to one other CPU
- * in the system.
- *
- * cpu is a standard Linux logical CPU number.
- */
-static void
-__smp_call_function_single(int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- struct call_data_struct data;
- int cpus = 1;
-
- data.func = func;
- data.info = info;
- atomic_set(&data.started, 0);
- data.wait = wait;
- if (wait)
- atomic_set(&data.finished, 0);
-
- call_data = &data;
- wmb();
- /* Send a message to all other CPUs and wait for them to respond */
- send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
-
- /* Wait for response */
- while (atomic_read(&data.started) != cpus)
- cpu_relax();
-
- if (!wait)
- return;
-
- while (atomic_read(&data.finished) != cpus)
- cpu_relax();
-}
-
-/*
- * smp_call_function_single - Run a function on another CPU
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Currently unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Retrurns 0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- /* prevent preemption and reschedule on another processor */
- int me = get_cpu();
- if (cpu == me) {
- WARN_ON(1);
- put_cpu();
- return -EBUSY;
- }
-
- /* Can deadlock when called with interrupts disabled */
- WARN_ON(irqs_disabled());
-
- spin_lock_bh(&call_lock);
- __smp_call_function_single(cpu, func, info, nonatomic, wait);
- spin_unlock_bh(&call_lock);
- put_cpu();
- return 0;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
static int convert_apicid_to_cpu(int apic_id)
{
int i;
next reply other threads:[~2007-03-13 1:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-13 1:12 Jeremy Fitzhardinge [this message]
2007-03-15 19:08 ` [PATCH] i386: Simplify smp_call_function*() by using common implementation Andrew Morton
2007-03-15 19:15 ` Jeremy Fitzhardinge
2007-03-15 19:33 ` Andrew Morton
2007-03-15 19:39 ` Jeremy Fitzhardinge
2007-03-15 20:55 ` Andi Kleen
2007-03-15 20:16 ` Jeremy Fitzhardinge
2007-03-15 23:25 ` Jeremy Fitzhardinge
2007-03-16 8:32 ` Ingo Molnar
2007-03-16 11:26 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45F5FA97.8070705@goop.org \
--to=jeremy@goop.org \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=eranian@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rdunlap@xenotime.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.