From: Jiri Slaby <jirislaby@gmail.com>
To: Anssi Hannula <anssi.hannula@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
johann deneux <johann.deneux@gmail.com>,
Linux kernel mailing list <linux-kernel@vger.kernel.org>,
linux-input@atrey.karlin.mff.cuni.cz
Subject: Re: FF layer restrictions [Was: [PATCH 1/1] Input: add sensable phantom driver]
Date: Wed, 14 Mar 2007 19:15:33 +0100 [thread overview]
Message-ID: <45F83BC5.7020606@gmail.com> (raw)
In-Reply-To: <45F83930.4060401@gmail.com>
Anssi Hannula napsal(a):
> Jiri Slaby wrote:
>> Dmitry Torokhov napsal(a):
>>> On 3/13/07, Jiri Slaby <jirislaby@gmail.com> wrote:
>>>> Why did you remove all Cced people? Anyway I filtered some of them out
>>>>
>>>> johann deneux napsal(a):
>>>>> You are right, the direction in ff_effect is meant to be an angle.
>>>>> A dirty solution would be to use the 16 bits as two 8-bits angles. Or
>>>> That would be a problem as I need 3x 16bits.
>
> Interesting. What kind of device is that? i.e. what is the third
> direction value?
6DOF sensable phantom:
http://www.sensable.com/haptic-phantom-premium-6dof.htm
X,Y,Z,RX,RY,RZ+BUT as inputs
X,Y,Z motors as FF
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
next prev parent reply other threads:[~2007-03-14 18:15 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-07 11:36 [PATCH 1/1] Input: add sensable phantom driver Jiri Slaby
2007-03-07 11:36 ` Jiri Slaby
2007-03-07 14:47 ` Dmitry Torokhov
2007-03-07 16:38 ` Jiri Slaby
2007-03-07 16:50 ` Greg KH
2007-03-07 16:56 ` Dmitry Torokhov
2007-03-13 16:19 ` Jiri Slaby
[not found] ` <38b3b7c0703131450v2646e63fj2be4b9dda7f928c0@mail.gmail.com>
2007-03-13 22:16 ` FF layer restrictions [Was: [PATCH 1/1] Input: add sensable phantom driver] Jiri Slaby
2007-03-14 15:02 ` Dmitry Torokhov
2007-03-14 16:43 ` Jiri Slaby
2007-03-14 16:45 ` Jiri Slaby
2007-03-14 18:04 ` Anssi Hannula
2007-03-14 18:15 ` Jiri Slaby [this message]
2007-03-14 18:47 ` STenyaK (Bruno González)
2007-03-14 19:12 ` STenyaK (Bruno González)
2007-03-14 19:13 ` Dmitry Torokhov
2007-03-14 19:18 ` STenyaK (Bruno González)
2007-03-15 20:51 ` johann deneux
2007-03-15 21:06 ` STenyaK (Bruno González)
2007-03-21 13:31 ` Jiri Slaby
2007-03-21 13:32 ` Jiri Slaby
2007-03-21 19:02 ` johann deneux
2007-03-21 19:22 ` Dmitry Torokhov
2007-03-21 20:04 ` Jiri Slaby
2007-03-21 22:03 ` johann deneux
2007-03-22 15:50 ` Dmitry Torokhov
2007-03-27 12:20 ` Jiri Slaby
2007-03-27 18:36 ` johann deneux
2007-03-27 20:11 ` Jiri Slaby
2007-03-27 20:43 ` johann deneux
2007-03-27 20:51 ` Jiri Slaby
2007-03-27 21:34 ` johann deneux
2007-03-28 3:08 ` Dmitry Torokhov
2007-03-28 9:28 ` Jiri Slaby
2007-03-28 22:16 ` Jiri Slaby
2007-03-28 22:22 ` Jiri Slaby
2007-03-30 16:46 ` Dmitry Torokhov
2007-03-30 19:11 ` Anssi Hannula
2007-03-15 20:43 ` johann deneux
2007-03-16 16:28 ` Pavel Machek
2007-03-17 7:28 ` johann deneux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45F83BC5.7020606@gmail.com \
--to=jirislaby@gmail.com \
--cc=anssi.hannula@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=johann.deneux@gmail.com \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.