From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <45F97587.9020604@domain.hid> Date: Thu, 15 Mar 2007 18:34:15 +0200 From: Maksym Veremeyenko MIME-Version: 1.0 Subject: Re: [Xenomai-help] mem usage and other application References: <17913.899.384216.185459@domain.hid> <45F90DC1.2030009@domain.hid> In-Reply-To: <45F90DC1.2030009@domain.hid> Content-Type: text/plain; charset=KOI8-U; format=flowed Content-Transfer-Encoding: quoted-printable List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: Xenomai help Gilles Chanteperdrix =D0=C9=DB=C5=D4: > Why changing the RAM size ?=20 i added RAM before to check if it could help running other non-RT=20 application. > Could you double-check with your RAM size > normally set ? Do you observe the "Bad pte" message with latency or > switchbench running, or with your RT application ? I started 'latency' and then start any perl script. It behavior depends=20 on configurations: Problematic configuration are: 1. Kernel 2.6.17.14, Xenomai 2.3.0... r2299, Adeos 1.5-02 2. Kernel 2.6.19.2, Xenomai r2299, Adeos 1.7-01 No problems with: 3. Kernel 2.6.19.2, Xenomai 2.3.0, Adeos 1.7-01 4. kernel 2.6.17.14, xenomai 2.2.4, Adeos 1.5-00 After applying your patch to configuration #1 or #2 situation become wort= h: 1) i still get errors, 2) i also get a "Bad pte" with 'process' points to non-RT application=20 caused fault 3) sometime perl script "core dumped": Core was generated by `/usr/bin/perl ./m1.meta.pl U0002323'. Program terminated with signal 11, Segmentation fault. #0 0x42a56004 in ?? () (gdb) bt #0 0x42a56004 in ?? () #1 0x42a547a7 in ?? () #2 0x0804bc0a in ?? () #3 0x00000000 in ?? () ________________________________________ Maksym Veremeyenko